Russia's Izhora Completes Manufacturing of Components for Egypt's First Nuclear Power Unit
Recently, the "Izhora" Production Complex in St. Petersburg (the mechanical engineering division of Rosatom, Russia's State Atomic Energy Corporation) has fully completed the manufacturing of the VVER-1200 reactor internals and reactor head for the first unit of the El Dabaa Nuclear Power Plant in Egypt. This large-scale nuclear power project, constructed by Rosatom in Egypt, is the first Generation III+ nuclear power plant on the entire African continent. The successful completion of these key heavy equipment items marks another major substantive progress in the project's construction.

This batch of reactor internals and reactor head equipment, soon to be shipped to the Egyptian construction site, has a total weight of approximately 340 tons. Prior to this, the VVER-1200 reactor pressure vessel for the first unit of the El Dabaa Nuclear Power Plant was completed at "Izhora" in September 2025 and successfully installed in its design position in November 2026. With the addition of the reactor internals and head, the total weight of the assembly will exceed 670 tons, making it one of the heaviest core components of the nuclear steam supply system in the unit, forming the foundation for ensuring the safety and leak-tightness of the nuclear reactor.
The internals of the VVER-1200 reactor (including the in-core shaft, baffle, and protective tube assembly) and the reactor head are extremely complex high-tech equipment, and their manufacturing process imposes extremely high requirements on process precision. Their components must achieve micron-level precision in drilling, surface finishing, and welding, aiming to ensure the precise arrangement and fixation of nuclear fuel, while effectively limiting the impact of neutron radiation on the pressure vessel and preventing the internals from floating up. The completion of these core components has paved the way for the subsequent installation of the remaining equipment in the plant building and comprehensive commissioning activities.
The El Dabaa Nuclear Power Plant, as Egypt's first nuclear power plant, is planned to have four units, each with a single-unit capacity of 1,200 MW, all equipped with Russia's mature and reliable Generation III VVER-1200 pressurized water reactor technology. Under the package contract signed by both parties, Russia is not only responsible for the full construction of the nuclear power plant but will also supply nuclear fuel throughout its entire operating life cycle and assist the Egyptian partners in training plant personnel during the first ten years of operation and technical maintenance. The on-time delivery of these key core equipment further demonstrates the outstanding performance capability of Russia's nuclear energy industry in the global manufacturing and engineering delivery of advanced nuclear power equipment.
Disclaimer: Information republished from partner media, institutions or other websites is provided for reference and communication purposes only. It does not imply endorsement of its views or verification of its accuracy. Please contact us if any content infringes rights or requires correction.