Main Construction of Unit 2 at CGN's Shandong Zhaoyuan Nuclear Power Project Commences

On the morning of September 5, the first concrete pour for the nuclear island of Unit 2 at CGN's Shandong Zhaoyuan Nuclear Power Project was initiated, marking the official commencement of main construction for this unit and the entry of the project's Phase I into full-scale construction. According to reports, the concrete pouring for Unit 2, which commenced construction this time, totals approximately 8,800 cubic meters, equivalent to the volume of 3.5 standard swimming pools. The pour is divided into 7 points and will be completed in a single continuous operation, with an estimated total duration of about 60 hours. The main construction of Unit 1 of this project commenced on November 18, 2025. Yu Xiangdong, General Commander of CGN's Shandong Zhaoyuan Nuclear Power Project, stated that currently, the adjacent Unit 1's nuclear island reactor building has completed the hoisting of 4 steel liner modules, with the steel liner constructed to elevation 29.72 meters. Construction of the conventional island turbine foundation, turbine frame, corridors, and circulating water pump pits is progressing concurrently, while cooling tower rebar cage installation and concrete pouring are underway. Construction safety and quality remain under control, with all work progressing in an orderly manner.

2026-09-05

China and Russia Advance Cooperation on Tianwan and Xudabao Nuclear Power Plant Construction

During the meeting of the China-Russia Intergovernmental Energy Committee, Chinese Vice Premier Ding Xuexiang stated that enterprises from both countries are expanding cooperation in the energy sector, strengthening power technology exchanges, and exploring the possibility of reverse power supply from China to Russia. During the meeting, Ding Xuexiang also mentioned the construction progress of the Tianwan and Xudabao nuclear power plants. He noted that the two countries are systematically advancing the relevant nuclear power projects, with Unit 1 of the Xudabao Nuclear Power Plant scheduled to commence operation by the end of this year. The meeting was held as part of the Eastern Economic Forum activities. In addition to nuclear power projects, China and Russia also exchanged views on cooperation in the power sector...

2026-09-05

Release of the Main Piping Welding Control Point for Unit 2 of Xudabao Nuclear Power Plant

Recently, the Northeast Regional Office of Nuclear and Radiation Safety Supervision under the Ministry of Ecology and Environment (hereinafter referred to as the Northeast Office) organized an inspection team to conduct an inspection at the main piping welding control point for Unit 2 of Xudabao Nuclear Power Plant. Experts from the East China Regional Office of Nuclear and Radiation Safety Supervision, the South China Regional Office of Nuclear and Radiation Safety Supervision, the Nuclear and Radiation Safety Center, the China Machinery Productivity Promotion Center, the Shanghai Nuclear Safety Review Center, the Suzhou Nuclear Safety Center, and other organizations participated in the inspection. As a critical component of the reactor coolant pressure boundary, the welding quality of the main piping is directly related to the construction quality and operational safety of the nuclear power unit. In strict accordance with relevant procedural requirements, the inspection team conducted a comprehensive inspection covering the implementation of the operating organization's quality assurance program, quality control of important items and activities, and preparation for main piping welding through on-site inspections, document reviews, and personnel interviews...

2026-09-05

China and Uzbekistan Deepen Cooperation in Nuclear Safety Regulatory Training

Since the National Nuclear Safety Administration and the Industrial, Radiation and Nuclear Safety Committee of Uzbekistan signed a Memorandum of Understanding (MoU) on nuclear safety cooperation at the beginning of the year, the two sides have continued to deepen their cooperation in the field of nuclear and radiation safety regulation. As an important measure to implement the MoU, the Nuclear and Radiation Safety Center of the Ministry of Ecology and Environment has successively organized two special training sessions for Uzbek nuclear safety regulators and convened China-Uzbekistan technical exchange activities on nuclear safety regulation. In June, the first training session focused on China's regulatory oversight of civil nuclear safety equipment. Experts from the Nuclear and Radiation Safety Center and the Northeast Regional Office of Nuclear and Radiation Safety Supervision delivered a four-week special training program for Uzbek trainees based on regulatory practices, covering China's...

2026-09-05

China-Russia Energy Cooperation Committee Meeting Discusses Cooperation in Nuclear Energy and Other Fields

Ding Xuexiang, Member of the Standing Committee of the Political Bureau of the CPC Central Committee and Vice Premier of the State Council, co-chaired the 23rd meeting of the China-Russia Energy Cooperation Committee with Russian Deputy Prime Minister Novak in Vladivostok on the 4th. Ding Xuexiang stated that President Xi Jinping and President Putin have held multiple meetings this year, conducting in-depth strategic communication and making top-level arrangements, drawing a clear blueprint for upgrading and enhancing China-Russia energy cooperation. Since the 22nd meeting of the China-Russia Energy Cooperation Committee, bilateral energy trade has steadily expanded, landmark major cooperation projects have progressed smoothly, and new progress has been made in clean energy cooperation. China is willing to work with Russia to implement the important consensus of the two heads of state, fully leverage the role of the committee mechanism, and promote...

2026-09-05

Concrete Placement Completed for Turbine Foundation Base Slab of Unit 5 Conventional Island at Ningde Nuclear Power Phase II

At 13:09 on September 2, the large-volume concrete placement for the turbine foundation base slab at elevation +15.95 meters in the conventional island building of Unit 5 of the Ningde Nuclear Power Project Phase II was completed. The placement lasted approximately 46 hours, marking phased progress in the main civil construction of the conventional island for this unit and creating conditions for subsequent installation of turbine-generator equipment. The placement commenced at 15:37 on August 31 and was carried out in a single continuous pour, with a cumulative concrete volume of 2,456 cubic meters. The turbine foundation base slab is a critical load-bearing structure in the conventional island of a nuclear power plant, supporting the loads of the turbine-generator unit and auxiliary equipment. It demands high structural precision, construction quality, and overall stability, and its forming quality will affect subsequent equipment installation accuracy and unit operational reliability.

2026-09-05

First Application and Verification of Intelligent Monitoring and Adjustment System for Nuclear Power Plant Personnel Status at "Hualong One" Nuclear Power Plant

On September 4, CGN Engineering, in collaboration with Cangnan Nuclear Power, successfully completed the testing, verification, and on-site data collection of the Intelligent Monitoring and Adjustment System for Nuclear Power Plant Personnel Status at the San'ao Nuclear Power Base. The CGN Engineering departments participating in this testing and verification included CGN Design Institute, the National Key Laboratory of Nuclear Power Safety Technology and Equipment (hereinafter referred to as the National Key Laboratory), CGN Engineering Cangnan Project Department, and Huasheng Technology. This joint test marks an important milestone in the project's transition from technology research and development to engineering application, providing key technical support for the quantitative analysis transformation of human factors safety management in China's nuclear power industry. The system, built upon the personnel fatigue status monitoring principle prototype developed under the Intelligent Nuclear Power strategic special project, has been iteratively improved with continuous support from the Yangjiang Chuangbao High-tech Research Project and the National Key Laboratory research projects, and has now evolved into a mature product suitable for engineering and large-scale application. Previously, relevant functional modules of the system had been deployed and data collected in applications such as human factors verification in the main control room of Yangjiang Nuclear Power Base and simulator training at Taishan Nuclear Power Base. The on-site testing and data collection at the San'ao Nuclear Power Base further verified the system's environmental adaptability and reliability across multiple nuclear power base scenarios, laying a solid foundation for subsequent industry-wide promotion and application.

2026-09-05

Danzhou in Hainan Advances "Nuclear Power to Yangpu" and "Nuclear Steam to Yangpu" to Support Zero-Carbon Industrial Park Development

On September 2, the series of themed press conferences for the "15th Five-Year Plan" kickoff (fifth session at the city and county level) — the Danzhou special session was held. A relevant official from Danzhou stated that during the "15th Five-Year Plan" period, Danzhou will focus on building a new-type power system, a new-type energy system, and zero-carbon industrial parks and low-carbon city development, promoting deep integration of clean energy with port-adjacent industries, and striving to become a national demonstration area for new-type power systems. According to the released content, during the "15th Five-Year Plan" period, Hainan Power Grid plans to invest 5 billion yuan in Danzhou to build a coordinated "transmission-distribution-microgrid" three-tier power grid. By 2030, Danzhou will fully establish a layered, zoned, and independently operated grid framework, promote "nuclear power to Yangpu" to achieve local consumption of green electricity with full-chain traceability and verifiability, reducing the regional power carbon emission factor across the entire area to below 0.05 kgCO₂/kWh.

2026-09-04

Site Construction Officially Launched for Phase I of Shandong Laiyang Nuclear Power Project

On September 1, the pre-work meeting and construction mobilization meeting for the main plant area site leveling of Phase I of the State Power Investment Corporation (SPIC) Shandong Laiyang Nuclear Power Project was held at the project site, marking a key step forward in the construction of the Laiyang Nuclear Power Project and the full launch of site leveling works for Phase I. Before the meeting, the construction crew organized a pre-work briefing, during which responsible persons from all participating construction parties inspected the site on location, verified the operating conditions of construction machinery and equipment one by one, and conducted inspections and evaluations of pre-work preparations, solidifying the foundational conditions for construction commencement from the source. At the construction site, engineering machinery stood in orderly formation, and the construction teams were in high spirits. The responsible person of SPIC Laiyang stated that the Laiyang Nuclear Power Project will strictly implement the "four strictest" work requirements, coordinate all aspects of safety, quality, and schedule, and that all participating construction units will work in synergy, strive for excellence, and promote high-quality project development throughout the full lifecycle, injecting strong momentum into the Group's nuclear energy business for greater strength, optimization, and expansion.

2026-09-04

Taiwan, China plans to restart Ma'anshan Nuclear Power Plant in 2028

Taiwan, China previously pursued a nuclear phase-out policy, but the direction is now showing signs of adjustment. The Taiwan Nuclear Safety Commission recently initiated the final administrative procedures for the Ma'anshan Nuclear Power Plant restart plan submitted by Taiwan Power Company, and the plan is expected to enter the formal review stage. Based on the current progress, the relevant units could resume operation as early as 2028. The Ma'anshan Nuclear Power Plant, also known as Taiwan's Third Nuclear Power Plant, is located in Hengchun Township, Pingtung County. The plant's commercial operating license has expired, and it previously ceased commercial operation. Data shows that the Ma'anshan Nuclear Power Plant once supplied approximately 5% of Taiwan's electricity, making it one of the key power sources in the local power system. Taiwan had previously proposed ceasing nuclear power operations by 2025...

2026-09-04

The Fifth Meeting of 2026 on the Construction of the Nuclear Power Safety and Health Archive System Convened

Recently, the Working Group on the Construction of the Nuclear Power Safety and Health Archive System held its fifth promotion meeting of 2026 and thematic subgroup meetings. Representatives from all member units of the working group and relevant organizations attended the meetings. The meetings discussed the progress of informatization construction, computing resource allocation, data governance and sharing, and R&D of digital and intelligent applications for the nuclear power safety and health archive system. Live demonstrations were conducted on the functional implementation of the health archive information systems on both the regulatory side and across various corporate groups. The achievements in system construction were summarized on a phased basis, existing issues were reviewed, and near-term work tasks were deployed. The meetings noted that the construction of the nuclear power safety and health archive system is an important endeavor in promoting the transformation of nuclear safety management and regulatory mechanisms. At present, data governance has achieved initial results, the data verification mechanism has been effectively implemented, and the development of application scenarios is being steadily advanced, creating conditions for the continued improvement of the system. The meetings required that: first, continue to adhere to a goal-oriented and problem-oriented approach, focus on the fundamental functions of the system, concentrate efforts on further addressing shortcomings in a targeted manner, and steadily advance system construction; second, in light of pilot application results, promptly conduct reviews and summaries, comprehensively identify difficulties, bottlenecks, and weak links, and improve the system's operational effectiveness across the entire process; third, continue to coordinate and advance various tasks including data benchmarking and warehousing, frontline demand research, and scenario development and implementation, making every effort to ensure the high-quality completion of the nuclear power safety and health archive system, thereby contributing to the continuous improvement of the operational safety and construction quality of nuclear power plants in China.

2026-09-04

Commissioning of the CRAFT Cryogenic System 6 kW@4.5 K Helium Refrigerator Successfully Completed

Recently, significant progress has been made in the construction of the helium refrigeration system on the CRAFT magnet platform. The on-site commissioning and performance testing of the main body of the CRAFT cryogenic system 6 kW@4.5 K helium refrigerator have been successfully completed, with all indicators meeting the design acceptance requirements. The commissioning work focused on systematic verification of the cold box refrigeration performance, liquefaction capacity, control system, safety interlocks, and the operating status of key cryogenic equipment. During the acceptance tests, the helium refrigerator completed 12 hours of continuous stable operation under design conditions, achieving a refrigeration capacity of 6 kW@4.5 K + 50 K@GHe. In addition to design conditions, the project team also conducted performance tests under helium liquefaction conditions, with relevant temperature, pressure,...

2026-09-03

Chongchi Company Leads the Formulation of National Standard for Gearboxes Used in Nuclear Power Seawater Circulation Pumps

Recently, the inaugural working group meeting for the national standard "Design Specification for Vertical Gearboxes Used in Nuclear Power Seawater Circulation Pumps," led by Chongchi Company, was successfully held. The convening of this meeting is not merely a technical specification discussion but also represents a significant leap for Chongchi Company from product manufacturing to rule-setting, marking a new stage where core nuclear power equipment enters the phase of "leading the definition." Leading the formulation of this national standard fully demonstrates Chongchi Company's technical strength and reflects its industrial responsibility. Only by consolidating the technical experience gained during R&D into standards can reproducible and scalable technical references be provided for the technological advancement and industrial upgrading of the entire industry.

2026-09-03

Qinshan Nuclear Power Completes Overhaul Validation of Grille Cleaning Robotic Arm

The grille cleaning robotic arm, an integrated system of UAV-based intelligent inspection and robotic arm automatic cleaning independently developed by the Mechanical Team of the Fourth Maintenance Division at Qinshan Nuclear Power, recently completed on-site validation during the Unit 2 312 overhaul at Qinshan Phase II. Designed for seawater system intake grille cleaning scenarios, this equipment transforms the original manual operation requiring entry into deep wells into an unmanned operation conducted under ground-based remote monitoring. The intake grille serves as a critical barrier for the cooling water system of a nuclear power plant, and its unobstructed condition is directly related to the stable operation of the unit. In traditional cleaning methods, workers were required to enter narrow shafts more than twenty meters underground to perform inspection and cleaning in confined spaces, which involved high labor intensity, low efficiency, and safety risks such as falls from height...

2026-09-03

SNPAS Successfully Completes Batch Shipment of 45 Nuclear-Grade Paperless Recorders

On August 27, SNPAS successfully completed factory acceptance and shipment of 45 nuclear-grade paperless recorders. This batch delivery marks that the product has completed full-process technical iteration, with all production links across the entire chain moving toward standardization. Domestic nuclear-grade display and control equipment now possesses sustained and stable batch supply capability, with continuously growing market recognition. The nuclear-grade paperless recorder is a core product of the high-reliability display and control platform based on FPGA (Field Programmable Gate Array) architecture. The entire product operation process involves no CPU or operating system, fundamentally resolving the industry pain points of traditional display and control equipment, namely difficult operating system verification and vulnerability to virus attacks. It inherently features virus resistance, no system freezes, instant startup, and fast response...

2026-09-03