Search Results

Fangchenggang Nuclear Power Station Unit 2 Completes First Ten-Year Overhaul

On the morning of August 25, Unit 2 of CGNPC Fangchenggang Nuclear Power Station successfully synchronized to the grid on its first attempt following the 7th overhaul, marking the completion of the F207 overhaul undertaken by CGNPC Service Maintenance Company. This overhaul was the first ten-year overhaul since Unit 2 was put into commercial operation. The maintenance process achieved the goal of "no indicator events in safety, quality, and schedule," and made breakthroughs in charging pump maintenance and nuclear-grade socket welding operations. During this overhaul, the nuclear-grade socket welding project was implemented on-site for the first time. To ensure work quality, the maintenance team completed preparatory work in advance, including welding procedure qualification certification, skill qualification process card review and submission, test piece welding, and non-destructive testing, all of which passed acceptance.

2026-08-28

TEPCO replaces faulty motor of robotic arm at Fukushima Daiichi Unit 2

Tokyo Electric Power Company (TEPCO) began replacing the faulty motor of the robotic arm used for fuel debris retrieval trials at Unit 2 of the Fukushima Daiichi Nuclear Power Station on August 26. The robotic arm, approximately 22 meters long, is planned for use in the third fuel debris retrieval trial. During a previous operational inspection inside the reactor building of Unit 2, TEPCO found that the motor driving the robotic arm had malfunctioned, preventing the brake from releasing and the arm from extending. As the robotic arm is already installed on site, workers will enter the "front chamber" in front of the containment vessel to perform the replacement manually. The company stated that radiation levels in the work area will be strictly controlled to prevent workers from receiving excessive exposure. After this replacement, TEPCO will...

2026-08-27

Bitumen Solidification Facility at Unit 2 of Japan's Ikata Nuclear Power Plant Returns to Normal

Shikoku Electric Power Co. reported on August 25, 2026, that the bitumen solidification facility at Unit 2 of Japan's Ikata Nuclear Power Plant, currently in a decommissioned state, had returned to normal operation at 10:45 a.m. that day. The gasket at the joint of the mixer top cover, where the earlier abnormality had been detected, had been replaced, and trial operation results showed no abnormalities. The incident occurred on April 28. On that day, when operators started the bitumen solidification facility in the controlled area of the reactor auxiliary building, they observed a steam-like phenomenon near the mixer thermometer, which subsequently disappeared on its own. Maintenance personnel later inspected and confirmed at 3:05 p.m. that the steam-like gas originated from inside the mixer and had escaped through the joint of the mixer top cover; at 5:06 p.m., the bitumen solidification facility was shut down.

2026-08-26

Main Piping and Surge Lines for Unit 2 of Xudabao Nuclear Power Plant Arrived at Site

On August 22, the main piping and surge lines for Unit 2 of Xudabao Nuclear Power Plant were successfully delivered to the site, laying a solid foundation for the commencement of main piping welding, a Level-1 milestone. The main piping serves as the aorta of the reactor coolant system. Together with the reactor pressure vessel, steam generators, and reactor coolant pumps, it forms a closed loop and pressure boundary. It is not only the core pipeline carrying the circulation and transfer of the reactor coolant but also a critical safety barrier for the nuclear island, making it an essential component of the nuclear island's core equipment. To ensure high-quality and on-time delivery of the equipment, Liaoning Nuclear Power took the lead in coordinating with the general contractor, procurement party, and equipment manufacturers, establishing a three-tier coordination mechanism of "daily reports + weekly meetings + monthly executive meetings" to fully streamline the information chain. Through measures such as optimizing production processes, mobilizing superior production capacity, and implementing continuous operations, all tasks were completed on schedule, ensuring the equipment was shipped and delivered to the site as planned.

2026-08-26

Construction of the conventional island raft foundation slab for Unit 2 of Zhejiang Jinqimen Nuclear Power Plant completed

At 3:36 on August 20, the raft foundation slab pouring for the conventional island of Unit 2 at Zhejiang Jinqimen Nuclear Power Plant was successfully completed. With the final batch of concrete precisely placed into the formwork, the main structure construction of the conventional island for this unit was officially initiated. The concrete supply for this pouring operation was provided by CNNC Concrete Xiangshan Branch. The operation lasted 29 hours and 20 minutes, with a cumulative supply of over 4,000 cubic meters of concrete, achieving continuous and stable material delivery. The maximum pouring thickness at this section was 3 meters, with a height difference of 7 meters at the variable cross-section locations, and the structural design service life is 60 years. The project features large-volume, high-intensity construction characteristics, compounded by the rainy climate conditions on site, imposing stringent requirements on concrete supply continuity, delivery stability, and temperature control precision.

2026-08-21

West Engineering Delivers 30 Relay Protection and Automation Cabinets for Unit 2 of Akkuyu NPP

West Engineering has completed the next stage of equipment delivery for Unit 2 of the Akkuyu Nuclear Power Plant in Türkiye, shipping 30 relay protection and automation cabinets to the project site. The equipment will be used for the protection, monitoring, and control of critical electrical components of the power unit. The delivered equipment includes AZ-PZ cabinets for generating analog and discrete information, power supply unit protection device cabinets, power unit measurement device cabinets, synchronizing relay cabinets, generator switch control cabinets, electrical process recording cabinets, and control current distribution cabinets, among others. According to reports, this batch of nuclear facility equipment has been designed with high safety margins and fault tolerance in mind. The supplied relay protection and automation systems comply with relevant international standards, with a safety class of 3H/N, meeting the NP-001-15 standard; the quality assurance category is QA3, and the equipment has undergone multi-stage quality control from material and component selection to acceptance testing.

2026-08-20

Trial lifting of damaged fuel assembly completed at Unit 2 of Japan's Fukushima Daiichi Nuclear Power Station

Tokyo Electric Power Company (TEPCO) announced on August 18 that a trial lifting of a damaged fuel assembly in the spent fuel pool of Unit 2 at the Fukushima Daiichi Nuclear Power Station has been completed. The assembly was damaged in a fall 45 years ago and was subsequently repaired with wire. This trial lifting was conducted to confirm whether it can be safely handled during the subsequent removal operation. A total of 615 fuel assemblies are stored in the Unit 2 fuel pool, including 587 spent fuel assemblies and 28 unused fuel assemblies. The removal work began on June 2, and the fuel assemblies will be transferred to the shared fuel pool within the plant site. As of August 17, 35 fuel assemblies had been removed. Despite interruptions during the operation, Tokyo Electric Power Company...

2026-08-20

First Concrete Pour Launched for Conventional Island of Jinqimen Nuclear Power Unit 2

At 22:16 on August 18, Zhejiang Jinqimen Nuclear Power construction reached another key milestone as the first concrete pour (FCD) for the raft foundation slab of the turbine generator building in the conventional island of Unit 2 was officially launched, marking the full commencement of the main construction of the conventional island of Jinqimen Nuclear Power Unit 2 and the project's official entry into the civil construction phase. The raft foundation slab being poured, as the core load-bearing structure of the conventional island, is a variable-cross-section, super-large-volume, waterproof and impermeable special concrete structure, and is the core section with the largest volume, most critical working conditions, and highest precision requirements among the conventional island raft foundation structures. This construction involves long continuous operation hours, stringent temperature control and crack prevention requirements, and significant construction organization challenges. To ensure the safe and high-quality completion of the project, CNNC Zheneng fully demonstrated the "owner" spirit, played the "backbone" role, and shouldered the "main force" responsibility, jointly establishing a dedicated technical task force with construction and supervision units, building on the mature FCD construction experience of Conventional Island Unit 1 to comprehensively optimize the raft construction process for Conventional Island Unit 2, strictly adhering to the highest quality standards and safety regulations for nuclear power construction.

2026-08-20

Shimane Nuclear Power Station Unit 2 Resumes Power Generation

Chugoku Electric Power Co. reported on August 19 that Unit 2 of the Shimane Nuclear Power Station resumed power generation at 2:00 p.m. that day through generator synchronization and began supplying electricity to the grid. Unit 2 of the Shimane Nuclear Power Station uses a boiling water reactor with a rated generating capacity of 820,000 kilowatts. Chugoku Electric Power Co. stated that it will prioritize safety, conduct comprehensive inspections of equipment operating conditions, and prepare for the unit to resume commercial operation as scheduled on September 16. ...

2026-08-19

Rajasthan Atomic Power Station Unit 2 Achieves First Full Year of Continuous Operation

Rajasthan Atomic Power Station Unit 2 (RAPS-2) achieved one full year of continuous operation on August 15, 2026. This marks the first time the unit has completed a full year of uninterrupted operation since it was commissioned, coinciding with India's 80th Independence Day. RAPS-2 is operated by the Nuclear Power Corporation of India Limited (NPCIL) and is one of the oldest pressurized heavy water reactor (PHWR) units still in operation by the company. This milestone of one full year of continuous operation is regarded as a significant reflection of the unit's operational management and equipment maintenance standards. Relevant information indicates that this operational record reflects the sustained commitment of Units 1 and 2 at the Rajasthan Atomic Power Station in safety culture, aging management, technical support, and operational organization, and also demonstrates the collaborative efforts of the on-site operations, maintenance, engineering, and support teams in ensuring stable unit operation.

2026-08-19

Akkuyu NPP Unit 2 Completes Installation of Four Main Pump Sets

The four main pump sets of the technical water supply system at the onshore pumping station of Unit 2 at Turkey's Akkuyu Nuclear Power Plant have been installed. Specialists from TITAN-2 Holding completed the installation, marking new progress in the construction of the turbine island cooling system for this unit. These large centrifugal pumps will be used to deliver seawater to the condenser cooling system of the turbine units. Once the unit is in operation, the continuous and stable operation of the pump sets will directly affect the cooling efficiency of the turbine hall equipment and influence the operational stability of the turbine units. According to reports, these pump sets are among the larger pump equipment at the nuclear power plant, with each pump standing as tall as a five-story building. The equipment is arranged in a tiered layout, with the pump bodies...

2026-08-19

Restart of Shimane Nuclear Power Plant Unit 2 Delayed to August 19

Chugoku Electric Power announced that the restart of power generation at Shimane Nuclear Power Plant Unit 2 has been postponed from the originally scheduled August 18 to August 19. Unit 2 of the Shimane Nuclear Power Plant has been shut down since February this year for routine inspections. After approximately six months of inspections, the reactor was started on August 13, and power generation was originally planned to resume on August 18 after reaching criticality, the state of a sustainable nuclear fission chain reaction. On August 18, at a special committee meeting on Shimane Nuclear Power Plant measures held in Matsue City, Chugoku Electric Power explained that the restart of power generation was delayed by one day, mainly because the restart process requires careful progression and additional time is needed to confirm the status of related equipment...

2026-08-19

Removal of Highly Radioactive Spent Fuel Begins at Unit 2 of Fukushima Daiichi Nuclear Power Station

Tokyo Electric Power Company Holdings (TEPCO) said on August 17 that it has begun removing spent fuel assemblies with high radiation levels from the spent fuel pool of Unit 2 at the Fukushima Daiichi Nuclear Power Station in northeastern Japan, the site of a severe nuclear accident. Last month, TEPCO removed 28 unused nuclear fuel assemblies from the Unit 2 spent fuel pool. Compared with spent fuel, these unused fuel assemblies pose relatively lower risks. The company plans to complete the removal of spent fuel from Unit 2 by the end of fiscal year 2028. To date, the Unit 2 spent fuel pool contains a total of 587 spent fuel assemblies, of which TEPCO has completed the removal of...

2026-08-18

Concrete pouring completed for turbine deck of conventional island of Unit 2 at CGN Lufeng Nuclear Power Plant

At 12:30 on August 11, 2026, concrete pouring officially commenced for the turbine deck of the conventional island of Unit 2 at CGN Lufeng Nuclear Power Plant, and was successfully completed at 16:00 on August 13, after 51.5 hours, with a total of 2,685m³ of concrete poured. The turbine deck structure of the conventional island of Unit 2 measures 68.7m in length and 16m in width, with a top elevation of +8.43m, consisting of two longitudinal beams and six transverse beams. Owner-supplied items include 296 anchor bolts, 56 lifting columns, 28 anchor plates, and 18 oil pipe sleeves, among which 8 sets of large embedded parts weigh over 10t each. The turbine deck construction features complex structures, a large number of owner-supplied embedded parts, and high precision requirements. During the turbine deck construction, the project team fully drew on the experience feedback from the conventional island turbine deck of Unit 1...

2026-08-18

Unit 2 of Romania's Cernavodă Nuclear Power Plant shut down for at least 10 days due to falling Danube River water levels

Romeo Urjan, head of Romania's Cernavodă Nuclear Power Plant, said that due to the continuous decline of Danube River water levels, Unit 2 of the plant has been shut down since August 13 for at least 10 days. Romania's Ministry of Energy stated on August 12 that Unit 2 of the Cernavodă Nuclear Power Plant required a temporary shutdown. As planned, the shutdown operation began on the morning of August 13 and was completed before noon that day. Urjan stated that Danube River water levels are expected to continue declining over the next 10 days, so the plant currently has no plans to restart Unit 2. He emphasized that this shutdown is unrelated to nuclear safety issues or emergencies, with the main reason being...

2026-08-14