MEPhI Achieves Breakthrough in Composite Material Fabrication for Fusion Reactor Walls
Recently, the research team from the "Materials Physics Problems" Department of the National Research Nuclear University MEPhI (NRNU MEPhI) announced the successful development of a high-performance composite material fabrication technology for the plasma-facing wall of future thermonuclear reactors. Through the innovative introduction of a specific nickel-iron alloy interlayer, the technology successfully bonded a porous structure of high-melting-point tungsten mesh with the reactor's conventional structural steel substrate into an integral component, effectively overcoming the material thermal mismatch and brittle fracture challenges that have long plagued the fusion engineering community.

In magnetic confinement nuclear fusion devices, the reactor's first wall faces the impact of extremely hot plasma streams and extreme thermal shock. Tungsten, with its ultra-high melting point of 3422 degrees Celsius and excellent thermal conductivity, is widely recognized as the optimal plasma-facing material. However, the enormous instantaneous energy generated during plasma disruptions can cause localized overheating. To address this, modern fusion engineering has proposed a "liquid metal" protection concept, which uses a capillary porous structure made of fine pressed tungsten wires—a tungsten sponge—to deliver a thin layer of liquid lithium to form an evaporative protective cloud. How to achieve reliable bonding between this porous tungsten sponge and the conventional structural steel substrate of a tokamak has been a core technical bottleneck hindering its practical engineering application.
Research has shown that conventional spot welding and mechanical clamping cannot provide excellent interfacial thermal contact and can easily lead to structural overheating and melting; while direct melt infiltration would inevitably cause steel and tungsten to form brittle intermetallic compounds such as Fe₇W₆ upon high-temperature contact, and trigger severe cracking driven by differences in thermal expansion coefficients. To this end, researchers at MEPhI conducted in-depth exploration of an alloy approach that eliminates steel and uses a nickel-to-iron ratio close to 2:1. Experiments confirmed that when a nickel-iron alloy containing 66 atomic percent nickel and 34 atomic percent iron (WNi34Fe) is used, tungsten does not form harmful brittle interlayers but instead dissolves perfectly in a ductile solid solution.
Through advanced casting and infiltration processes, the research team successfully produced an integral composite sandwich structure with a tungsten content of up to 42 volume percent. The composite material not only completely eliminates brittle interlayers and phase-boundary cracks in the structure, but also achieves a seamless transition between the reactor steel shell and the high-temperature-resistant tungsten structure. Engineer Nikita Popov of MEPhI, who participated in the research, noted that this technology points to a clear path for manufacturing integral monolithic reactor structures that can be directly connected to cooling channels. With further optimization of process parameters in the future, this breakthrough in materials science will powerfully accelerate the pace of lighting up clean fusion energy on Earth.
Disclaimer: Information republished from partner media, institutions or other websites is provided for reference and communication purposes only. It does not imply endorsement of its views or verification of its accuracy. Please contact us if any content infringes rights or requires correction.