Search Results

Keyword:equipment

SPIC Signs RMB 7.8 Billion CAP1400 Supply Chain Contracts in Zhanjiang

SPIC Signs RMB 7.8 Billion CAP1400 Supply Chain Contracts in Zhanjiang

Recently, the State Power Investment Corporation (SPIC) CAP1400 Modern Industrial Chain Co-chain Action Conference was held in Zhanjiang, Guangdong Province, where RMB 7.8 billion in industrial chain supply and demand contracts were signed on site, and investment intentions for 6 enterprises to establish operations were finalized, marking that China's domestically developed third-generation nuclear power technology has officially moved from single-project construction into a new stage of full-chain industrialized cluster development. It is understood that the RMB 7.8 billion in contracts this time are procurement orders for CAP1400 equipment, materials, and supporting services, not the total investment of nuclear power projects, with all funds used for nuclear power industrial chain supporting procurement; meanwhile, the investment intentions of the 6 enterprises signed...

2026-11-20

South China Regional Office carries out supervision of core equipment at Changjiang Small Modular Reactor

South China Regional Office carries out supervision of core equipment at Changjiang Small Modular Reactor

Recently, the Hainan Changjiang Multi-Purpose Modular Small Reactor Technology Demonstration Project (referred to as the Changjiang Small Modular Reactor, Linglong One) officially launched the second-phase hot performance test. The South China Nuclear and Radiation Safety Supervision Station of the Ministry of Ecology and Environment (hereinafter referred to as the South China Supervision Station), together with the Nuclear and Radiation Safety Center (hereinafter referred to as the Nuclear Safety Center), conducted full-process on-site supervision of the commissioning tests of core equipment such as the main pump, focusing on verifying the effectiveness of test process control and confirming that all equipment parameters and test results met the stringent acceptance criteria requirements. During the supervision process, regulators and technical personnel strictly followed the commissioning supervision outline requirements and attended important pre-test briefings as observers...

2026-11-18

South China Supervision Station and CGN Research Institute Conduct Equipment Supervision Exchange

South China Supervision Station and CGN Research Institute Conduct Equipment Supervision Exchange

Recently, the South China Nuclear and Radiation Safety Inspection Station of the Ministry of Ecology and Environment (hereinafter referred to as the South China Supervision Station) and CGN Research Institute Co., Ltd. (hereinafter referred to as the Research Institute) conducted an in-depth work exchange on nuclear safety equipment supervision matters, aiming to further strengthen equipment supervision communication and smoothly take over nuclear safety equipment supervision responsibilities. As an important licensed unit for nuclear safety equipment design and manufacturing in South China and a Class 1 radioactive material transport container design unit, CGN Research Institute detailed at the exchange its nuclear equipment...

2026-11-07

Two Types of I&C Equipment for China's Zhangzhou Nuclear Power Unit 3 Pass Acceptance Synchronously

Two Types of I&C Equipment for China's Zhangzhou Nuclear Power Unit 3 Pass Acceptance Synchronously

Recently, the "Longlin" safety-class and "Longqi" non-safety-class digital control system (DCS) equipment for Zhangzhou Nuclear Power Unit 3 completed factory acceptance synchronously. China Nuclear Power Engineering Co., Ltd., as the purchaser, organized and advanced the acceptance work for the two types of equipment, verifying the compliance of equipment technical specifications with design and engineering application requirements, laying the foundation for subsequent supply and on-site installation and commissioning. DCS performs monitoring, control and protection functions for relevant systems and equipment in nuclear power plants, and is an important component of the unit's instrumentation and control system. Safety-class and non-safety-class systems respectively undertake tasks of different safety levels, with different emphases in technical requirements, quality assurance and verification procedures. This synchronous org...

2026-11-05

Visiting Taipingling Nuclear Power Plant and the Nuclear Heavy Equipment Manufacturing Base: Hualong One Iteration, Forging the Pinnacle of Heavy Equipment, China's Nuclear Power Advances Toward a New Stage

Visiting Taipingling Nuclear Power Plant and the Nuclear Heavy Equipment Manufacturing Base: Hualong One Iteration, Forging the Pinnacle of Heavy Equipment, China's Nuclear Power Advances Toward a New Stage

Standing on the viewing platform of Taipingling Nuclear Power Plant by the Red Bay, leaning on the railing and gazing into the distance, a picture of modern industry blending with mountains and sea unfolds before your eyes. Multiple Hualong One nuclear power units are lined up in formation; Phase I has entered stable commercial operation, Phase II is at the peak of civil construction, and with the official approval of Phase III, the Hualong One Version 2.0 demonstration project is poised for launch. From Daya Bay, where the early domestic content rate was less than 1%, to today's achievement of organized and batch deployment of independently developed third-generation nuclear power, China's nuclear power industry is entering deep waters on the dual tracks of technological innovation and industrial manufacturing. In this process, Taipingling Nuclear Power Plant and Dongfang Heavy Machinery in Nansha, Guangzhou, together constitute a vivid microcosm of China's nuclear power industry transitioning from "following and importing" to "full-chain autonomy and industrial upgrading."

2026-10-30

China Spallation Neutron Source Completes Important Milestone Equipment Installation Task, Beam Power Exceeds 200 kW

China Spallation Neutron Source Completes Important Milestone Equipment Installation Task, Beam Power Exceeds 200 kW

To minimize the impact on user operations, the China Spallation Neutron Source Phase II Project (CSNS-II) utilizes the annual summer shutdown window to carry out Phase II equipment installation. During this year's summer shutdown, the project team completed the installation and commissioning of the front-end equipment of the linear accelerator, all solid-state modulators, and the third magnetic alloy cavity of the rapid cycling synchrotron. At this point, all equipment of the CSNS-II accelerator except the superconducting accelerator has been installed. After nearly a month of beam commissioning, on October 20, 2026, the facility's beam power exceeded 200 kW and officially entered user operation, reaching twice the Phase I design beam power. This is also an important milestone in the CSNS-II construction, providing key verification for achieving the Phase II...

2026-10-25

Steam Generator for Zhangzhou Nuclear Power Phase II Unit 4 Manufactured by Harbin Electric Power Equipment Co., Ltd. Successfully Shipped

Steam Generator for Zhangzhou Nuclear Power Phase II Unit 4 Manufactured by Harbin Electric Power Equipment Co., Ltd. Successfully Shipped

On October 24, 2026, the steam generator for Zhangzhou Nuclear Power Phase II Unit 4, manufactured by Harbin Electric Power Equipment Co., Ltd. (hereinafter referred to as "HEPE"), was successfully shipped. The steam generator for this unit successfully carried forward the good momentum of early delivery achieved for Unit 3, completing delivery 3 months ahead of the contractual delivery date. This marks the successful fulfillment of the "Hualong One" steam generator contract for Units 3 and 4 of Zhangzhou Nuclear Power Phase II, laying a solid foundation for a good start to the "15th Five-Year Plan" period with stable production capacity and outstanding quality. The steam generator is the core equipment of the "Hualong One" nuclear power unit, undertaking the core functions of core energy conversion and ensuring stable power generation of the unit. A single steam generator weighs 370 tons, with sophisticated structure and complex manufacturing processes, featuring high manufacturing standards and stringent process parameters...

2026-10-25

CNNC Qintong Innovatively Builds a Digital-Intelligent Operation and Maintenance Management System for Its Isotope Base

CNNC Qintong Innovatively Builds a Digital-Intelligent Operation and Maintenance Management System for Its Isotope Base

Recently, Chinatom Qinshan Isotope Co., Ltd. (hereinafter referred to as "CNNC Qintong"), centering on the isotope production base construction project, successfully built a digital-intelligent operation and maintenance (O&M) management system with the Integrated Intelligent Production Information Management Platform (IMS) as its core. By empowering full-lifecycle equipment control and intelligent decision-making, the system effectively addresses O&M management pain points in nuclear technology application scenarios with high safety requirements and high complexity. It is understood that the system, with the Integrated Intelligent Production Information Management Platform (IMS) as its management hub, has achieved unified coding and labeling of 6,799 pieces of equipment across the entire plant and "one file per unit" full-lifecycle traceability. By deeply linking equipment ledgers with maintenance plans, repair work orders and spare parts management, CNNC Qintong has not only driven the upgrade of its maintenance model toward condition monitoring and predictive maintenance, but also achieved significant cost reduction, efficiency improvement and energy consumption optimization through HVAC variable-frequency renovation and self-developed automatic calibration platforms.

2026-10-22

French Nuclear Safety and Radiation Protection Authority Approves Exemption of ITER Vacuum Vessel from Fission Pressurized Equipment Regulation

French Nuclear Safety and Radiation Protection Authority Approves Exemption of ITER Vacuum Vessel from Fission Pressurized Equipment Regulation

The French Nuclear Safety and Radiation Protection Authority (ASNR) has formally issued a regulatory ruling, approving the application by the International Thermonuclear Experimental Reactor (ITER) Organization to exclude the Vacuum Vessel, a core component of the ITER tokamak device, from the scope of regulation under the French and European Nuclear Pressure Equipment Directive (ESPN). This breakthrough ruling marks the beginning of key fusion reactor components breaking free from the regulatory framework derived from traditional fission reactors. Prior to this decision, the ITER Vacuum Vessel had long been classified as nuclear pressure equipment. This classification originated from the management practices of traditional light-water fission reactors, whose underlying logic presumes internal pressure as the primary engineering load on the structure. However...

2026-10-11

Harbin Electric Power Equipment Company Nuclear Power MES System Has Been Fully Switched into Operation

Harbin Electric Power Equipment Company Nuclear Power MES System Has Been Fully Switched into Operation

Recently, the nuclear power MES system of Harbin Electric Power Equipment Company has been fully switched into operation, achieving that work plan maintenance, tracking, and all other operations are based on MES. This is a key achievement of the company's independent research and development of information systems realizing a zero breakthrough. The full name of the nuclear power MES system is Nuclear Power Manufacturing Execution System. It is the smart brain or neural center in the nuclear power production workshop, specifically responsible for accurately and transparently implementing upper-level production plans into the actions of each process in the workshop. The full switch of the nuclear power MES system is an important measure for building a world-class nuclear main pump research and development base. Harbin Electric Power Equipment Company conducted an in-depth analysis of pain points such as insufficient cross-link plan coordination, constraints from material completeness, and weak refined process control...

2026-10-10

Poland Launches Procurement of Key Equipment for Its First Nuclear Power Plant

Poland Launches Procurement of Key Equipment for Its First Nuclear Power Plant

Polskie Elektrownie Jądrowe (PEJ) announced on October 8, 2026, that it has formally commissioned Westinghouse Electric Company of the United States to initiate the ordering of Long-Lead Items (LLI) for Unit 1 of Poland's first nuclear power plant. The nuclear power project is located at the Lubiatowo-Kopalino site in Choczewo, Pomeranian Voivodeship, northern Poland, and is planned to house 3 Westinghouse AP1000 pressurized water reactor units. Long-lead critical components typically encompass large heavy forgings and castings required for the reactor pressure vessel, steam turbine and generator, dedicated instrumentation and control software, and high-technical-difficulty structural components...

2026-10-09

CGN Begood's Two Self-Developed CT Security Inspection Devices Obtain CAAC Use License

CGN Begood's Two Self-Developed CT Security Inspection Devices Obtain CAAC Use License

The BGCT-0824 medium-sized CT security inspection device and the BGCT-1050S large-sized CT security inspection device, independently developed by CGN Begood Technology Co., Ltd. (CGN Begood), have recently officially obtained the "Civil Aviation Administration of China Security Inspection Equipment Use License." The acquisition of this qualification marks that CGN Begood has officially entered the core field of civil aviation passenger checked baggage security inspection, achieving a key access breakthrough in the high-end equipment field of civil aviation aviation security. Both devices certified this time are X-ray computed tomography (CT) explosive detection security inspection devices for passenger checked baggage. Prior to certification, both models had successfully passed the full-process on-site rigorous qualification testing conducted by the Aviation Security Research Institute of the China Academy of Civil Aviation Science and Technology (CAST)...

2026-10-09

"Major National Heavy Equipment · Industrial Answer Sheet" In-Depth Analysis of Independent Supporting of Core Parts of China's Hualong One

"Major National Heavy Equipment · Industrial Answer Sheet" In-Depth Analysis of Independent Supporting of Core Parts of China's Hualong One

According to reports, on October 3, the News Center of the State-owned Assets Supervision and Administration Commission of the State Council of China and the Finance Channel of China Central Radio and Television Station jointly launched "Major National Heavy Equipment · Industrial Answer Sheet," with the first episode focusing on China's nuclear industry. Zhang Tao, General Manager of China National Nuclear Corporation, explained the key components of the Hualong One. The program disclosed that the steam generator support buffer block is the size of an eraser and weighs less than 80 grams, yet it can withstand an impact force of 45 tons, equivalent to the crushing weight of 10 adult elephants. This detail brings China's nuclear power independence from the narrative of complete units back to the component level. The following analyzes the significance of this breakthrough from several aspects. Why a small part is the key to the safety chain. This component needs to achieve large-deformation energy absorption under extreme conditions such as earthquakes and pipe rupture...

2026-10-04

Korea Holds Briefing Session on Bidding for Auxiliary Equipment for Czech Dukovany Nuclear Power Project

Korea Holds Briefing Session on Bidding for Auxiliary Equipment for Czech Dukovany Nuclear Power Project

Korea Hydro & Nuclear Power (KHNP) officially held the briefing session on bidding for auxiliary equipment for the Czech Dukovany Nuclear Power Project on September 30 at the Radiation Health Institute in Seoul. As the Czech Dukovany new Nuclear Power Plant (NPP) project has fully transitioned from the preliminary supplier qualification and registration stage to the substantive bidding and equipment procurement stage, this briefing session was aimed at providing comprehensive guidance and support for Korean domestic equipment manufacturers to participate in the bidding. The meeting attracted approximately 130 plant auxiliary equipment (...

2026-10-04

Poskom Angular Pinch Magnet Pulsed Power Supply Delivered, X-ray High-Voltage Power Supply Manufacturer Officially Enters Fusion Equipment Sector

Poskom Angular Pinch Magnet Pulsed Power Supply Delivered, X-ray High-Voltage Power Supply Manufacturer Officially Enters Fusion Equipment Sector

Recently, the angular pinch magnet pulsed power supply (TP power supply) independently developed by Poskom has completed delivery, marking that this X-ray high-voltage power supply manufacturer has officially entered the controlled nuclear fusion track. This power supply primarily serves experiments including angular pinch, field-reversed configuration (FRC), magnetized plasma generation, and magnetic confinement compression. It is key specialized power equipment for magnetic confinement controlled nuclear fusion and high-energy-density physics research, featuring hardcore capabilities such as nanosecond-level multi-stage multi-channel pulse timing coordination, waveform fidelity under ultra-high current and strong electromagnetic interference, and precise regulation of mutual inductance coupling multi-waveform attenuation, capable of matching the demanding operating conditions of frontier fusion experiments. Poskom was founded in 2015, focusing on specialized high-voltage power supplies, pulsed...

2026-10-03