Search Results

CGN Technology joins forces with enterprises to build China's first fully self-developed electron beam curing coil coating industrial chain

On August 5, CGN Dasheng Accelerator Technology Co., Ltd., a subsidiary of CGN Technology, signed a strategic cooperation agreement on electron beam curing coil coating with Zhejiang Jiaguangshu New Material Technology Co., Ltd. Leveraging the electron accelerator equipment independently developed and manufactured by CGN Dasheng, combined with the partner's large-scale mass production process capabilities, the two parties jointly built China's first fully self-controlled, fully domestically produced complete industrial chain for electron beam curing coil coating, marking the official entry of China's color-coated steel industry into a new era of solvent-free, zero-VOC (volatile organic compounds), room-temperature green curing. CGN Dasheng and Zhejiang Jiaguangshu signed the strategic cooperation agreement on electron beam curing coil coating. Electron beam curing is...

2026-08-06

Romania postpones sinking barges to guide water flow, safeguarding cooling water supply for Cernavodă Nuclear Power Plant

Romania has recently taken emergency measures to address the impact of the persistently declining Danube River water level on the water supply to its nuclear power plant. On August 5 local time, Romanian authorities stated that four barges would be sunk in the Danube River to guide water flow into the water intake channel related to the cooling water supply of the Cernavodă Nuclear Power Plant. Cernavodă is Romania's only nuclear power plant. Affected by drought and the low water level of the Danube, the plant's water intake conditions are under pressure. On August 3, the Romanian military used approximately 180 kilograms of explosives to blast and clear a rock formation in the Danube riverbed, aiming to improve the water flow channel, ensure the cooling water source for units in operation, and prevent the nuclear units from being forced to shut down due to insufficient water supply...

2026-08-06

SNPAS Completes Shipment of First Batch of Cabinets for PLS and DDS Systems of Lianjiang Nuclear Power Unit 2

Recently, witnessed by Zhanjiang Nuclear Power and Shanghai Nuclear Engineering Research and Design Institute (SNERDI), SNPAS successfully completed the delivery of the first batch of cabinets for the Plant Control System (PLS) and Data Display and Processing System (DDS) of Unit 2 of the Guangdong Lianjiang Nuclear Power Project Phase I, with the equipment having arrived at the project site smoothly. Sun Mingjun, Member of the Party Committee and Deputy General Manager of Zhanjiang Nuclear Power, Liu Xin, Deputy General Manager of SNPAS, and Zhou Xu, Deputy General Manager of the Procurement Center of SNERDI, attended the shipment ceremony. This shipment marks an important milestone in the execution of the instrumentation and control (I&C) system for Unit 2, signifying that the main I&C equipment has officially entered the stage of batch delivery and on-site installation preparation. The shipment of Unit 2 follows the mature experience of Unit 1 in...

2026-08-06

SNPAS Completes Shipment of First Batch of Cabinets for PLS and DDS Systems of Lianjiang Nuclear Power Unit 2

Recently, witnessed by Zhanjiang Nuclear Power and Shanghai Nuclear Engineering Research and Design Institute (SNERDI), SNPAS successfully completed the shipment and delivery of the first batch of cabinets for the Plant Control System (PLS) and Data Display and Processing System (DDS) of Unit 2 of the Phase I project of Guangdong Lianjiang Nuclear Power Project, with the equipment having arrived at the project site smoothly. Sun Mingjun, Member of the Party Committee and Deputy General Manager of Zhanjiang Nuclear Power, Liu Xin, Deputy General Manager of SNPAS, and Zhou Xu, Deputy General Manager of the Procurement Center of SNERDI, attended the shipment ceremony. This shipment marks an important milestone in the implementation of the instrumentation and control (I&C) system for Unit 2, signifying that the main I&C equipment has officially entered the phase of batch delivery and on-site installation preparation. The shipment of Unit 2 continues the...

2026-08-06

He Liuyi, Deputy Secretary of the Party Committee and General Manager of Daya Bay Nuclear Power Operations and Management Co., Ltd., along with Board Directors, Visits CGN Nuclear Maintenance for Investigation

On August 4, He Liuyi, Deputy Secretary of the Party Committee and General Manager of Daya Bay Nuclear Power Operations and Management Co., Ltd., along with Directors Wu Zijian, Cao Dongqing, and Huang Yong, visited the Qingdao base of CGN Nuclear Maintenance for investigation. Ouyang Wu, Member of the Party Committee, Chief Accountant, and Secretary to the Board of Directors of Daya Bay Nuclear Power Operations and Management Co., Ltd., Li Xiaowei, Member of the Party Committee and Deputy General Manager, and Ma Gang, Director of Guangdong Nuclear Power Joint Venture Co., Ltd., accompanied the visit. Dong Juncheng, Secretary of the Party Committee and Chairman of the Company, presided over the meeting. At the meeting, Dong Juncheng provided a detailed introduction to the company's products and services, mission and honors, Party building, industrial layout, core nuclear power maintenance technologies, achievements in building the national nuclear emergency response team, and the...

2026-08-06

Han Bing, Chairman of Hefei Municipal CPPCC, Leads Delegation to CYC Ion for Research and Guidance

On the afternoon of August 4, Han Bing, Chairman of Hefei Municipal Committee of the Chinese People's Political Consultative Conference (CPPCC), led a delegation to CYC Ion for research and guidance, and held a symposium. Yong Fengshan, Deputy Director of the Standing Committee of the Municipal People's Congress; Su Xiang, Secretary-General of the Municipal CPPCC; Jiang Xin, Chairman of the Municipal Industrial Investment Group; Zhang Xiaofeng, Director of the Education, Science, Health and Sports Committee of the Municipal CPPCC; and Guo Mei, Deputy Director of the Municipal Bureau of Industry and Information Technology, participated in the event. Song Yuntao, Deputy Director of the Hefei Institutes of Physical Science, Chinese Academy of Sciences; Liu Lu, Chairman of CYC Ion; Chen Yonghua, General Manager; and Deputy General Managers Ding Kaizhong, Li Jun, and Guang Ruohuai accompanied the delegation. The delegation was briefed in detail on CYC Ion's industrial layout and business operations, with discussions focusing on key technological breakthroughs in nuclear medicine and high-end equipment, technology transfer and commercialization, and industrial development.

2026-08-06

CGN Dasheng Joins Hands with Zhejiang Jiaguangshu to Build China's First Fully Self-Developed Electron Beam Curing Coil Steel Coating Industry Chain

On August 5, CGN Dasheng Accelerator Technology Co., Ltd. signed a strategic cooperation agreement on electron beam curing coil steel coating with Zhejiang Jiaguangshu New Material Technology Co., Ltd. Leveraging the electron accelerator equipment independently developed and manufactured by CGN Dasheng, combined with the partner's large-scale mass production process capabilities, the two parties jointly built the first fully self-controllable, fully domestically produced complete industry chain for electron beam curing coil steel coating in China, marking the official entry of China's color coating industry into a new era of solvent-free, zero VOC (volatile organic compounds), and room-temperature green curing. ▲CGN Dasheng and Zhejiang Jiaguangshu sign strategic cooperation agreement on electron beam curing coil steel coating Electron beam curing is a revolutionary new technology for metal coil coating...

2026-08-06

New Dawn for the Dutch Province of Zeeland: Borssele and Vlissingen May Welcome New Nuclear Power Plants

The Dutch government is seriously considering the construction of new nuclear power plants in the Borssele and Vlissingen areas. Although other locations were initially taken into consideration, these two towns in the province of Zeeland have emerged as potential frontrunners due to their well-developed infrastructure and convenient connections to the existing electricity grid. The plan aims to help the Netherlands achieve its climate goals, reduce dependence on fossil fuels, and ensure the stability and sustainability of the national energy supply. The advisory body responsible for evaluating potential nuclear power plant sites has submitted a preliminary report to the government. This report provides a detailed analysis of the advantages and disadvantages of each candidate location, including, in addition to Borssele and Vlissingen, several other regions...

2026-08-05

CGN's First Spatial Truss-Type Heavy-Duty Intelligent Warehouse Robot Piloted at Ningde Nuclear Power Project

Recently, the pilot project of CGN's first spatial truss-type heavy-duty intelligent warehouse robot, jointly launched by the Equipment Package and Supply Center and the Ningde Project Department, was officially put into operation at the Ningde Nuclear Power Project. The deployment and commissioning of this spatial truss intelligent warehouse robot marks a new stage for nuclear power engineering material warehousing, officially entering a three-dimensional, unmanned, and intelligent phase. As an intelligent device tailor-made for large-material scenarios in nuclear power engineering, the spatial truss intelligent warehouse robot breaks the limitations of traditional light-duty warehousing equipment. It adopts a robust truss-type structure and achieves millimeter-level precision control and multi-axis heavy-load capacity through X, Y, and Z three-axis spatial positioning, enabling...

2026-08-05

Czech nuclear safety officials say domestic nuclear power plants have sufficient cooling water for both existing and new units

Droughts across parts of Europe are affecting the operation of some nuclear power plants. Due to low water levels and flow rates in the Danube River, two reactors at Romania's Cernavodă Nuclear Power Plant have been shut down, and Hungary's Paks Nuclear Power Plant also faces the risk of a complete shutdown. Štěpán Kochánek, Chairman of the Czech State Office for Nuclear Safety (SÚJB), stated that plant operators should not be allowed to continue operating units at full power when cooling water is insufficient, and that related shutdown measures are conservative actions predefined in operating procedures. Kochánek explained that reactor shutdowns are not an unusually rare operation. Unit shutdown typically involves gradually reducing reactor power, inserting control rods, and bringing fission reactions to a minimal level or complete cessation. After shutdown, the reactor still requires cooling, but the demand for cooling water volume and capacity is significantly lower than during full-power operation. He noted that this process shares similarities with planned outages such as refueling overhauls and is a standardized procedure that operators should master.

2026-08-05

Shimane Nuclear Power Station Unit 2 scheduled inspection completion date moved up to September 16

Chugoku Electric Power Co., Inc. announced on August 5 that the schedule for the 18th periodic utility inspection of Shimane Nuclear Power Station Unit 2 has been revised, with the inspection completion date moved up from September 17, 2026 to September 16, and the power generation resumption date moved up from August 19 to August 18. Shimane Nuclear Power Station Unit 2 is a boiling water reactor unit with a rated electrical output of 820 MW. The unit was shut down on February 9, 2026 and entered its 18th periodic utility inspection. The reason for this adjustment is that, during the reactor start-up preparation work, the procurement of the nitrogen gas source used to fill the reactor containment vessel was completed earlier than planned, allowing the related work to be advanced accordingly...

2026-08-05

Brazilian nuclear industry company starts fuel production for Angra 2's 22nd refueling

Brazilian Nuclear Industries (INB) has started production of nuclear fuel required for the 22nd refueling of Unit 2 at the Angra Nuclear Power Plant (Angra 2). On July 28, INB completed the assembly of the first fuel assembly at the Nuclear Fuel Factory (FCN) in Resende, Rio de Janeiro State; on July 30, the fuel assembly passed all established quality inspections in the production process and was certified. According to the plan, INB will manufacture a total of 52 fuel assemblies for this refueling. The assembly work is expected to be completed in December 2026 and delivered to Eletronuclear in March 2027. Recently, INB has made progress in several key stages of the nuclear fuel manufacturing chain. On July 28, approximately 240 tons of enriched...

2026-08-05

US Oak Ridge National Laboratory Advances New Process to Boost Californium-252 Production

Oak Ridge National Laboratory (ORNL), under the US Department of Energy, is advancing a new Californium-252 (Cf-252) separation process to address growing market demand. The laboratory stated that this process, developed over nearly a decade of research, is expected to shorten the Cf-252 production cycle by about one week, significantly improving processing efficiency without altering product quality. Californium-252 is a neutron-emitting radioisotope used in nuclear reactor startup, fuel testing for new reactors, as well as in oil well logging, coal analysis, port security, fuel rod scanners, and instrument calibration. ORNL noted that it is the only producer of Cf-252 in the Western world...

2026-08-05

ÚJV Řež completes irradiation testing of cable samples for CERN, verifying material radiation resistance

On August 3, the Radiation Chemistry and Environmental Qualification Department of ÚJV Řež stated that it had completed irradiation testing of cable samples for the European Organization for Nuclear Research (CERN) research team within a relatively short period, and submitted the test results required for subsequent research. The purpose of this testing was to confirm whether the relevant material samples could maintain reliable performance under high-radiation environments. ÚJV Řež has long been engaged in environmental qualification and cable lifetime management, with capabilities in radiation aging, thermal aging simulation, and testing of material mechanical and electrical properties. Through these tests, researchers can assess the tolerance limits of materials in harsh environments, providing a basis for equipment selection, operation and maintenance, and subsequent experiments...

2026-08-05

IsoEnergy and DISA to Form DISA Uranium, Advancing U.S. Uranium Recovery and Processing Platform

IsoEnergy Ltd. and DISA Technologies, Inc. have entered into a definitive agreement to jointly establish DISA Uranium™ Corporation, building a technology-driven U.S. uranium production, processing, and remediation platform. The platform will combine conventional uranium mining assets, uranium recovery operations, and DISA's proprietary High-Pressure Slurry Ablation processing technology (HPSA™) to serve U.S. domestic nuclear fuel supply needs. Under the agreement, IsoEnergy will transfer its portfolio of licensed and previously producing uranium mine projects located in Utah, U.S., to DISA Uranium, including the Tony M Mine, Daneros Mine, Rim Mine, Sage Plain Project, and Flatir...

2026-08-05