Search Results

Bangladesh Science and Technology Minister Meets Russian Delegates to Advance Rooppur Nuclear Power Plant Grid Connection

Bangladesh Science and Technology Minister Fakir Mahbub Anam met with Andrey Rozhdestvin, General Director of Rosatom Energy Projects JSC, a subsidiary of Russia's Rosatom, in Washington, D.C., USA, on August 27. The two sides held bilateral talks on the construction progress of the Rooppur Nuclear Power Plant and subsequent grid connection arrangements. The discussions focused on the overall construction progress of the Rooppur Nuclear Power Plant, acceleration of remaining work, and the technical and coordination measures required to deliver power from the unit to Bangladesh's national grid as soon as possible while adhering to established procedures...

2026-08-28

Russia's Kursk Nuclear Power Plant Releases Annual Environmental Report

Russia's Kursk Nuclear Power Plant recently presented its annual environmental report to local residents in the city of Kurchatov. This year's presentation adopted a cycling event format for the first time, with participants including local residents, city Duma deputies, and relevant personnel, held in the area of Warm Coast Park. The Kursk Nuclear Power Plant is part of Rosenergoatom, the power generation division operator of Russia's state nuclear corporation Rosatom. The plant stated that the event route was specially designed to allow participants to learn about environmental protection data during the ride and directly observe the environmental conditions in the area surrounding the plant. Kursk...

2026-08-28

Russian Thorium-Based Radiopharmaceuticals Expected Within 1-2 Years

On August 27, Igor Korobko, Professor of the Russian Academy of Sciences and Director of the Department of Medical and Scientific Development in Healthcare of the Russian Ministry of Health, stated at the Technoprom Forum held in Novosibirsk that thorium-based drugs for precision radionuclide therapy of tumors are expected to become available in Russia within the next 1 to 2 years. Korobko noted that tumor treatment still requires support from more available isotopes. For example, when patients develop resistance to actinium-related therapies, clinical practice necessitates the use of different isotopes for treatment. He stated that Russia is advancing the development of related therapies domestically and expects to have thorium-based drugs within the next year or two. Currently, actinium-225 is considered one of the more promising radionuclides...

2026-08-28

Russia Plans to Complete Development of First Domestic Proton Beam Therapy Cyclotron by 2027

Russian scientists plan to complete the development of the country's first domestically produced proton beam therapy cyclotron by 2027, with commissioning to begin in the same year. This progress was announced by Sergey Gertzog, CEO of the Russian National Institute of Electronics and Atomic Energy (NIIEFA), at the recent Technoprom forum held in Novosibirsk. A proton beam therapy cyclotron is a type of charged particle accelerator that uses magnetic and electric fields to accelerate protons to high-energy states, reaching speeds of one-half to two-thirds the speed of light. The accelerated proton beam can target cancerous tumor areas with relative precision for oncological treatment. According to the schedule outlined in Gertzog's report...

2026-08-28

France's ITER research program may start before 2034

Scientific preparation work for the International Thermonuclear Experimental Reactor (ITER) is currently about 7 months ahead of the original schedule, and the research program may start earlier than the previously set target of 2034. Anatoly Krasilnikov, Director of the ITER Project Center at Rosatom, revealed this progress during the Technoprom-2026 forum. Krasilnikov stated that the project team no longer uses the milestone term "first plasma," but has instead adjusted the objective to "start of the research program," with a target date of 2034. Based on the current progress, the work is 7 months ahead of schedule, and there is a possibility of achieving the goal ahead of time...

2026-08-28

Construction Advances for Holtec's SMR-300 Test Facility at Idaho National Laboratory

Holtec International recently announced that construction of its HI-TEST test facility, supporting the SMR-300 small modular reactor, is advancing at Idaho National Laboratory (INL), with manufacturing of key test components and preparation for facility installation already underway. The facility simulates the SMR-300 plant at approximately one-third scale and is designed to quantify reactor design and operational performance margins, providing a test basis for potential future power uprates. Supported by the U.S. Department of Energy (USDOE), the HI-TEST facility's primary mission is to validate SMR-300 design margins under steady-state and transient conditions, offering physical test data for the plant's power generation capacity, resilience, and operability...

2026-08-28

Bristol Myers Squibb to Invest $173 Million in New Radiopharmaceutical Plant in Indiana, USA

Bristol Myers Squibb's RayzeBio will build a new radiopharmaceutical production facility in Whitestown, Indiana, USA, with an investment of $173 million. The project will be located at the Anson Industrial Park in Boone County, with construction planned to begin this year, complementing RayzeBio's existing operational radiopharmaceutical plant in Indianapolis. According to information released by the state of Indiana, the new facility will cover approximately 225,000 square feet. Bristol Myers Squibb expects the two production sites to add 100 new positions by the end of 2029, with annual salaries for new positions expected to exceed $130,000. Bristol Myers Squibb acquired San Diego-based RayzeBio in 2023 for $4.1 billion...

2026-08-28

Russia and Egypt Plan to Jointly Establish Additive Manufacturing Center in Egypt

According to the fuel division of Rosatom, it has signed a joint statement of intent with the Egyptian Nuclear Power Plant Construction Supervision and Execution Authority (EA-SNPP), with both sides planning to cooperate in establishing an additive manufacturing center in Egypt. The statement said that Mahmoud Esmat, Minister of Electricity and Renewable Energy of the Arab Republic of Egypt, visited the Moscow Additive Manufacturing Center under the fuel division of Rosatom during his visit to Russia. Following the visit, the Russian fuel division and the Egyptian Nuclear Power Plant Project Supervision and Execution Authority signed the aforementioned statement, clarifying their cooperation in building an additive manufacturing center in Egypt. The cooperation revolves around additive manufacturing...

2026-08-28

Hole of about 3 meters confirmed at bottom of reactor pressure vessel of Unit 3 at Fukushima Daiichi Nuclear Power Station

Tokyo Electric Power Company (TEPCO) announced on August 27 that a hole approximately 3 meters in diameter has been confirmed at the bottom of the reactor pressure vessel of Unit 3 at the Fukushima Daiichi Nuclear Power Station. The pressure vessel is a steel container that held nuclear fuel before the accident, with a cylindrical shape and a diameter of about 5.5 meters. This is the first time since the core meltdown accident at Units 1 to 3 of the Fukushima Daiichi Nuclear Power Station in 2011 that the specific size and shape of such a hole have been confirmed on the pressure vessel. The hole is believed to be related to the falling of melted nuclear fuel during the 2011 accident. After the accident, the containment vessel of Unit 3 has maintained a relatively high water level for an extended period, and access routes into the containment vessel are limited. TEPCO previously used a micro drone measuring approximately 12 centimeters per side...

2026-08-28

Japan to Build Fusion Tritium Fuel Research Base in Aomori Prefecture

Japan's Ministry of Education, Culture, Sports, Science and Technology (MEXT) has decided to establish a new fusion power generation research base in Aomori Prefecture, focusing on tritium fuel handling technology. The base will target the development needs of fusion demonstration projects in the 2030s, promoting joint research and development among industry, government, and academia. MEXT plans to include approximately 100 billion yen in fusion development-related funding in its budget request for the next fiscal year. Fusion power generation releases energy through the fusion reaction of deuterium and tritium nuclei, a principle similar to the energy generation process inside the sun. Unlike traditional nuclear power that relies on nuclear fission chain reactions, fusion reactions carry a lower risk of runaway, leading many countries to view it as an important direction for future energy technology...

2026-08-28

Japan's Tokai No. 2 Nuclear Power Plant Seawall Reinforcement Plan Receives Basic Approval

Japan's Nuclear Regulation Authority (NRA) held a review meeting on the 27th local time and basically approved the seawall structural modification plan for the Tokai No. 2 Nuclear Power Plant submitted by Japan Atomic Power Company (JAPC). The plant is located in Tokai Village, Ibaraki Prefecture, Japan, and the relevant seawall is an important component of the safety measures required for restart, with foundation defects having been discovered during construction. According to JAPC's explanation, the modification plan does not remove the underground foundation where defects were found, but instead adds pile foundations around it and uses cement-based materials to reinforce the ground. Regarding this plan, JAPC submitted an assessment of the seawall's seismic and tsunami resistance performance after modification, concluding that the structurally adjusted seawall can still fulfill the functions required of a tsunami protection facility.

2026-08-28

South Korea's Pohang to Build Core Component Factory for Small Modular Reactors

The city of Pohang and North Gyeongsang Province recently signed a memorandum of understanding with Hyundai Heavy Industries Turbomachinery Co., Ltd. to build a large-scale production plant for eco-friendly turbomachinery and core components for small modular reactors (SMRs) at the fourth comprehensive industrial complex in Pohang's Yeongil Bay, with an investment of approximately 100 billion KRW. Under the agreement, Hyundai Heavy Industries Turbomachinery plans to carry out the project between 2026 and 2029, constructing related production facilities on a 101,128-square-meter site within the complex. Upon completion, the project is expected to create approximately 100 new jobs and boost the local manufacturing sector...

2026-08-28

3D Systems Collaborates with Savannah River National Laboratory to Advance 3D Printing in Nuclear Energy Systems

3D Systems Corporation of the United States announced on August 27 that it has signed a Cooperative Research and Development Agreement (CRADA) with Savannah River National Laboratory (SRNL), under which the two parties will conduct joint research and development on additive manufacturing technology to advance its application in advanced energy production, nuclear energy systems, energy infrastructure resilience, and related mission scenarios. Under the agreement, the two parties will leverage SRNL's Advanced Manufacturing Collaborative (AMC) to advance work in advanced materials development, equipment upgrades, AI and machine learning-assisted process optimization, manufacturing systems, cybersecurity, and workforce development. Collaboration goals include developing next-generation additive manufacturing materials, real-time process optimization tools, and scalable production solutions...

2026-08-28

Cambridge AtomWorks Opens New Laboratory at Granta Park to Develop ODIN Microreactor

Cambridge AtomWorks announced on August 27 that its new light industrial facility and laboratory at Granta Park in Cambridge, UK, has officially entered service. The site, leased from TWI (The Welding Institute), will be used to advance research and development work related to the ODIN microreactor. According to the company, the new laboratory has already begun conducting experiments closely linked to ODIN microreactor development, including studies on coolant properties and behavior. The research team is using an STA-MS system to characterize material properties related to fuel performance, which enables simultaneous thermogravimetric analysis, heat flow analysis, and mass spectrometry. The new facility will also be used for reactor flow...

2026-08-28

South Korean research team evaluates pipe rupture risk in nuclear power plants using probabilistic analysis

Researchers from Seoul National University of Science and Technology in South Korea have recently proposed a sensitivity analysis method based on probabilistic fracture mechanics to evaluate the rupture frequency of main coolant piping systems in nuclear power plants. This method can analyze the impact of uncertainties and modeling assumptions on prediction results, helping engineers distinguish extremely low-probability events from relatively more likely failure scenarios. In nuclear power plants, the main coolant piping system plays a critical role in maintaining structural integrity under normal reactor operating conditions. A pipe rupture could trigger a loss-of-coolant accident, and therefore this system has long been included in the key scope of nuclear power plant safety design and assessment.

2026-08-28