Search Results

Qinshan Nuclear Power Completes Overhaul Validation of Grille Cleaning Robotic Arm

The grille cleaning robotic arm, an integrated system of UAV-based intelligent inspection and robotic arm automatic cleaning independently developed by the Mechanical Team of the Fourth Maintenance Division at Qinshan Nuclear Power, recently completed on-site validation during the Unit 2 312 overhaul at Qinshan Phase II. Designed for seawater system intake grille cleaning scenarios, this equipment transforms the original manual operation requiring entry into deep wells into an unmanned operation conducted under ground-based remote monitoring. The intake grille serves as a critical barrier for the cooling water system of a nuclear power plant, and its unobstructed condition is directly related to the stable operation of the unit. In traditional cleaning methods, workers were required to enter narrow shafts more than twenty meters underground to perform inspection and cleaning in confined spaces, which involved high labor intensity, low efficiency, and safety risks such as falls from height...

2026-09-03

Demolition Begins on Contaminated Buildings in Isotope Area at Oak Ridge National Laboratory

The Oak Ridge Environmental Management Office in Tennessee recently initiated demolition of a group of highly contaminated buildings in the Isotope Area at Oak Ridge National Laboratory. Located in the laboratory's central campus, this area is considered one of the more challenging sites in the local cleanup effort. The Isotope Area comprises 10 facilities, constructed between the late 1940s and early 1960s, which once served the laboratory's isotope program. These facilities were used for decades in the production, processing, and research of chemical elements for medical, industrial, and scientific applications. As the laboratory evolved, the facilities were taken out of service in the early 1990s but remained standing. According to reports, the area retains contaminated...

2026-09-02

South Korea's Uljin Pushes Forward with Nuclear Hydrogen Industrial Complex Development

Uljin County in North Gyeongsang Province, South Korea, is seeking support from the National Assembly and the government to promote the construction of the Uljin Nuclear Hydrogen National Industrial Complex, with the goal of establishing the region as a clean hydrogen production hub through supporting policies such as stable power supply and hydrogen pipeline networks. On August 31, Uljin County Governor Hwang Ui-jo attended a nuclear hydrogen policy seminar held at the National Assembly Members' Office Building to present the progress of the Uljin Nuclear Hydrogen National Industrial Complex and the policy tasks required for developing the nuclear hydrogen industry. The seminar was hosted by the National Assembly Hydrogen Economy Forum, with participants from the National Assembly, government, local governments, industry, academia, and...

2026-09-02

NewHydrogen Files Third Patent Application for ThermoLoop Hydrogen Production Technology

NewHydrogen, Inc. recently announced that it has filed a third provisional patent application jointly with the University of California, Santa Barbara (UCSB) to protect developments related to its clean hydrogen production technology, ThermoLoop. The patent application is titled "Isothermal Chemical Looping Hydrogen Production." According to NewHydrogen, the application builds on two previous patents and covers the latest improvements to the ThermoLoop thermochemical water-splitting process, as well as novel material compositions discovered by the UCSB technical team. The process produces hydrogen by splitting water using thermal energy, combined with advanced solid-state materials and machine learning-driven materials discovery methods to improve efficiency and cost-effectiveness...

2026-09-02

Gallium ion FIB-SEM sample preparation has a damage limit; low-energy argon ion beam cleaning is used to improve TEM sample quality

Gallium ion focused ion beam-scanning electron microscopy (Ga⁺ FIB-SEM) has become an important method for site-specific thin lamella sample preparation for transmission electron microscopy/scanning transmission electron microscopy (TEM/STEM), enabling cutting, extraction, and thinning of target regions at the nanometer scale. However, the literature indicates that while gallium ions provide high-precision machining capability, they also cause amorphization, ion implantation, and localized chemical modification on the sample surface, which can subsequently affect high-resolution imaging and energy dispersive spectroscopy analysis results. According to the literature, Ga⁺ FIB-SEM typically enables high-resolution site-specific machining at 30 keV, but high-energy gallium ions form a damage layer on the sample sidewalls. Taking silicon as an example...

2026-08-31

KHNP Advances Nuclear Process Heat-Based Hydrogen Production Ecosystem

Korea Hydro & Nuclear Power (KHNP) held a preparatory meeting in Daejeon on August 26 to establish an advisory body for building the Korean solid oxide cell industrial ecosystem, and discussed R&D strategic alliances and industry-academia-research cooperation frameworks. The collaboration will bring together industry, academia, and research institutions, including the Korea Institute of Ceramic Engineering and Technology (KICET). KHNP plans to use the advisory body as a platform to connect R&D, demonstration, and commercialization, promoting the self-reliance of Korean solid oxide cell (K-SOC) related technologies. According to the meeting agenda, KHNP will serve as the lead enterprise, proposing technology development directions needed for demonstration applications and commercialization; the Korea Institute of Ceramic Engineering and Technology will play a supporting role in supplying core industrial technologies.

2026-08-27

New Analytical Laboratory Completed at Oak Ridge to Support U-233 Cleanup and Medical Isotope Supply

The U.S. Department of Energy Oak Ridge Environmental Management Office (OREM) and its contractor Isotek Systems completed installation of a new analytical laboratory at Oak Ridge National Laboratory (ORNL) on August 25, 2026. The laboratory will support ORNL's highest-priority environmental cleanup project and accelerate delivery of critical medical isotope materials for cancer treatment research. Isotek Systems is responsible for removing the U.S. uranium-233 inventory stored at Oak Ridge National Laboratory. Uranium-233 was primarily developed in the 1950s and 1960s, initially intended for use as nuclear reactor fuel, but was later proven unsuitable as a commercial fuel source...

2026-08-26

Hanford Site Resumes Certification Work for Permanent Disposal of Transuranic Waste

The U.S. Department of Energy Office of Environmental Management recently stated that its contractor, Central Plateau Cleanup Company, has resumed transuranic waste characterization and disposal certification work at the Hanford Site in Washington State, preparing for the future shipment of relevant waste to the Waste Isolation Pilot Plant near Carlsbad, New Mexico, for permanent disposal. The Hanford Site had suspended its transuranic waste treatment program in 2011 due to higher priorities for other cleanup tasks, and resumed related work in 2018. According to the plan, the site will resume shipping contact-handled transuranic waste to the Waste Isolation Pilot Plant by September 30, 2028. Hanford Site Office of the U.S. Department of Energy Office of Environmental Management...

2026-08-26

CFHI Dalian Nuclear Power Evaporator Clean Room Project Advances Preliminary Preparations

Recently, preliminary preparations are advancing for the clean room project under the evaporator batch manufacturing capacity building initiative of CFHI Dalian Nuclear Power & Petrochemical. Located in the Dalian Bay coastal equipment manufacturing cluster, the project will improve the clean operating conditions for nuclear power evaporator production and address the shortcomings in supporting processes for batch manufacturing. The project has a total investment of 18.81 million yuan, covering an area of approximately 2,600 square meters, with a new building area of approximately 2,600 square meters. The construction centers on the evaporator tube bundle assembly clean room, supplemented by installation workstations, channel head storage areas, packaging transport track systems, and air purification systems. Since the project launch, relevant departments in Dalian Bay have been providing service support for preliminary work including land planning, engineering scheme preparation, and approval coordination, while liaising with municipal and district-level industry authorities to resolve bottlenecks in project advancement and improve the efficiency of preliminary preparations.

2026-08-22

India and Germany's Hesse Explore Clean Energy Cooperation, with Discussions Covering Laser-Based Nuclear Fusion Research

On August 19, India's Minister of Commerce and Industry Piyush Goyal held talks with Boris Rhein, Minister-President of the German state of Hesse, to discuss strengthening economic and technological cooperation between India and Hesse. Manfred Pentz, Minister for Federal and European Affairs, International Affairs and Deregulation, along with a German business delegation, attended the meeting. The talks covered several emerging and high-growth sectors, with energy-related discussions focusing on clean energy and future technologies. The two sides discussed Hesse's initiatives in next-generation energy technologies, including laser-based...

2026-08-20

U.S. Laboratory Advances Nuclear Waste Cleanup Technology R&D with Artificial Intelligence

Researchers in South Carolina, U.S., are leveraging artificial intelligence to develop new tools for tackling complex tasks such as nuclear material disposal, waste management, and environmental cleanup. The relevant projects are being conducted at the Advanced Manufacturing Collaborative (AMC) in Aiken, a facility affiliated with the Savannah River National Laboratory (SRNL), spanning approximately 63,000 square feet, with the project launched on August 7, 2025. The Advanced Manufacturing Collaborative brings together researchers, engineers, students, industry partners, and university teams, with a focus on advancing R&D in artificial intelligence, robotics, additive manufacturing, and advanced materials. Johnny Green, Director of the Savannah River National Laboratory, stated that...

2026-08-19

Terra Clean Energy Receives Exploration Permit for Marysvale Uranium Project in Utah, USA

Terra Clean Energy Corp. recently announced that it has received the relevant permit from the Utah Division of Oil, Gas and Mining under the Utah Department of Natural Resources to carry out planned exploration work at its wholly-owned Marysvale Uranium Project. Under the approved work plan, the company will construct 5 drill pads to support subsequent diamond core drilling, and excavate 7 exploration trenches to expose and evaluate known uranium-bearing outcrops. Terra stated that this permit represents a significant milestone in advancing this historic uranium project. The trenching work will help the company's technical team map mineralized structures, collect samples, and validate existing geological interpretations. The results will...

2026-08-18

Adani Group in Talks with Odisha on Nuclear Power Projects, Plans Two 3,000 MW Clean Energy Facilities

India's Adani Group is accelerating its industrial footprint in Odisha, with nuclear power, clean energy, mining, aluminum, and port infrastructure emerging as key priorities in recent discussions. Senior executives of the group recently held talks with Odisha government officials to discuss advancing a range of energy and industrial projects in the state, including two proposed 3,000 MW power generation facilities and an integrated coal gasification and coal-to-chemicals project with an investment of approximately INR 800 billion. Karan Adani, CEO of Adani Ports and Special Economic Zone Ltd...

2026-08-17

Chinese Team Achieves Full Technical Chain Integration in Wall Treatment for the World's Largest "Artificial Sun"

Recently, the team from the Southwestern Institute of Physics under the China National Nuclear Corporation (CNNC) has made significant progress in the wall treatment technology of the International Thermonuclear Experimental Reactor (ITER): not only successfully passing the Delta Final Design Review (Delta FDR) for the supplementary design of the Glow Discharge Cleaning (GDC) system permanent electrode project, but also, leading and jointly with CNI23, winning the bid and signing contracts in France for the design and manufacture of the boronization system and the X-ray Crystal Spectrometer (XRCS) gas supply system. This marks a new expansion of the Chinese team's core technology in ITER wall treatment, extending the scope from the original glow discharge cleaning to boronization wall treatment, achieving a full technical chain from impurity removal to surface pre-treatment...

2026-08-15

GAO: DOE Nuclear Cleanup "End-State Contract Model" Exceeds Budget by $500 Million in Six Years and Misses Goals

A report released by the U.S. Government Accountability Office (GAO) on July 29 shows that the Office of Environmental Management (EM) at the U.S. Department of Energy has accumulated over $500 million in cost growth on nuclear waste cleanup contracts since 2020, yet the agency cannot fully explain the reasons for these increases. EM is responsible for cleaning up 15 sites in the United States contaminated by nuclear weapons production and energy research. To address long-standing contract management problems, EM adopted the End-State Contract Model (ESCM) starting in fiscal year 2020, breaking cleanup work into smaller task orders under larger master contracts, with the goal of improving cost predictability, accelerating cleanup progress, and enhancing performance outcomes...

2026-08-12