Search Results

South Africa's Nuclear Power Project Achieves Substantive Progress: 5,200 MW Nuclear Power Project Enters Full EIA Phase

Babalwa Lobishe, Mayor of Nelson Mandela Bay, South Africa, publicly stated on October 23 that she highly welcomes the approval of the final scoping report for Eskom's proposed 5,200 MW Thyspunt large-scale nuclear power project. The project site is located in Kouga Local Municipality, Eastern Cape, and the approval of the report by the Department of Forestry, Fisheries and the Environment (DFFE) marks that this major clean baseload project has officially been approved to enter the comprehensive Environmental Impact Assessment (EIA) phase, taking a key step toward final statutory approval.

2026-10-24

CGN Nuclear Technology Returns to the European Association of Nuclear Medicine Annual Congress, Hejia Isotopes Debut on the Global Nuclear Medicine Stage

The 39th Annual Congress of the European Association of Nuclear Medicine was held in Vienna, Austria, from October 17 to 21. CGN Nuclear Technology appeared once again, continuing its participation since its first exhibition in 2025, and showcased the core medical isotope products of CGN Isotope (Mianyang) Technology Co., Ltd. The exhibition focused on CGN Hejia® Germanium-68 solution, Germanium-Gallium generator and supporting automatic elution device, while also introducing multiple medical isotope products such as Oxygen-18, Copper-64, Zirconium-89 and Iodine-123. At this annual congress, physical exhibits such as the Germanium-Gallium generator and the supporting automatic elution device clearly demonstrated the company's technical...

2026-10-23

Unit 1 of State Power Investment Corporation (SPIC) Guangdong Lianjiang Nuclear Power Project Achieves First-Time Success in 220kV Backfeed Power Transmission

On October 22, the 220kV backfeed power transmission for Unit 1 of Phase I of SPIC Guangdong Lianjiang Nuclear Power Project achieved first-time success, marking the unit's full entry into the commissioning phase and laying a solid foundation for subsequent commissioning and high-quality commercial operation. The 220kV backfeed power transmission is the first major commissioning milestone for Lianjiang Nuclear Power Unit 1. The transmission scope covers the off-site 220kV transmission line, the on-site 220kV switchyard, the auxiliary transformer, the 10kV medium-voltage busbars and their control and protection systems. Its function is to feed power from the off-site grid in reverse to the unit's station service power system, providing reliable power support for subsequent commissioning and production operations. To ensure the first-time success of the backfeed power transmission, Zhanjiang Nuclear Power, together with the general contractor Shanghai Nuclear Engineering Research and Design Institute and all participating construction units...

2026-10-23

Ethiopian Prime Minister Abiy Ahmed Conducts Comprehensive Assessment of Preparations and Progress of the National Nuclear Energy Program

Ethiopian Prime Minister Abiy Ahmed visited the Ethiopian Nuclear Energy Commission on October 22 for an on-site inspection to comprehensively assess the preparations and progress of the country's national nuclear energy program. During the inspection, Abiy explicitly stated that the research, development, and introduction of cutting-edge technologies play a pivotal supporting role in Ethiopia's long-term economic transformation process, and the country must examine the strategic value of scientific and technological innovation from a higher perspective. In remarks delivered during the inspection, Abiy said that Ethiopia must not limit itself to addressing immediate short-term economic demands, but must also look to the future and invest heavily in...

2026-10-23

Hanhai Fusion Energy Receives Project Approval Support from the Sichuan Provincial Department of Science and Technology Key R&D Program

The project "Development and Application Demonstration of Megawatt-Level Microsecond Pulsed Energy Output and Recovery Energy Storage System for Transient Operating Conditions of Fusion Devices," organized and applied for by Chengdu Hanhai Fusion Energy Technology Co., Ltd., has recently been officially approved for establishment following rigorous review by the Sichuan Provincial Department of Science and Technology, and has been included in the Sichuan Provincial Key R&D Program with dedicated research funding support. This is the first time that a Sichuan provincial-level key R&D program has supported controlled nuclear fusion commercialization technology exploration in the form of a dedicated project, with the project focus precisely targeting the development of pulsed energy output and electromagnetic direct recovery energy storage systems unique to the field-reversed configuration (FRC) technical route. As global controlled nuclear fusion gradually transitions from the fundamental physics question of "whether ignition can be achieved" to...

2026-10-23

St. Lucie Nuclear Power Plant in the United States Marks 50 Years of Operation and Receives Approval for 20-Year License Renewal

The St. Lucie County Nuclear Power Plant in Florida recently celebrated the 50th anniversary of its commercial operation and simultaneously received approval from the U.S. Nuclear Regulatory Commission (NRC) to extend its operating license by an additional 20 years beyond the original term, raising the upper limit of its design operating service life to 70 years. This approval marks a significant achievement in the plant's safe operation and reflects its important role in future energy supply. As the primary zero-carbon baseload power source in Florida's coastal region, the St. Lucie Nuclear Power Plant has, over the past five decades of operation, provided...

2026-10-23

Uzbekistan President Mirziyoyev Meets Rosatom Director General, Focusing on Implementation and Supporting Construction of the First Integrated Nuclear Power Plant Project

Uzbekistan President Shavkat Mirziyoyev met on October 23 in the capital Tashkent with visiting Russian State Atomic Energy Corporation (Rosatom) Director General Alexey Likhachev. The two sides held in-depth working talks on core topics including the comprehensive advancement and implementation of Uzbekistan's first integrated nuclear power plant project, the introduction and adaptation of cutting-edge nuclear energy technologies, and the intensive construction of supporting industrial infrastructure. According to the press service of the Uzbek presidential administration, the talks focused on the practical engineering fulfillment and key process interfaces of the country's first nuclear power project...

2026-10-23

Ontario Power Generation Subsidiary Joins UK SMR Project to Partner with SGE in Operating and Maintaining 14 BWRX-300 Reactors

SGE SMR UK, the UK project entity under SGE (formerly Synthos Green Energy), a European small modular reactor (SMR) development and investment organization, and Origin Nuclear, a wholly-owned subsidiary of Canada's Ontario Power Generation (OPG), formally signed a letter of intent on October 22 to establish a joint venture operating company that will be responsible for the operation and technical support of 14 planned BWRX-300 small modular reactor units in the UK. According to SGE's earlier 2026...

2026-10-23

China Institute of Atomic Energy Successfully Completes Full-Process Experimental Verification of Post-Irradiation Fuel Assembly Reassembly Technology for Integrated Fast Reactor

Recently, the China Institute of Atomic Energy (CIAE) under China National Nuclear Corporation (CNNC) successfully completed the full-process experimental verification of post-irradiation fuel assembly reassembly technology for the integrated closed fuel cycle fast reactor nuclear energy system (referred to as the integrated fast reactor), and successfully developed a reassembly prototype, comprehensively verifying the technical feasibility. This achievement marks that CIAE has independently mastered the core technology of post-irradiation fuel assembly reassembly for fast reactors, laying a solid foundation for subsequent engineering applications and material and fuel research under higher irradiation dose conditions, and is of great significance for enhancing China's advanced nuclear fuel R&D level and promoting the development of the closed fuel cycle. The full-process experimental verification platform for post-irradiation fuel assembly reassembly technology...

2026-10-23

The East China Nuclear and Radiation Safety Supervision Station of the Ministry of Ecology and Environment convenes the 2026 East China Regional Nuclear Facility Safety Work Conference

Recently, the East China Nuclear and Radiation Safety Supervision Station of the Ministry of Ecology and Environment (hereinafter referred to as the East China Supervision Station) organized the 2026 East China Regional Nuclear Facility Safety Work Conference in Jiujiang, Jiangxi. Four nuclear power joint-stock companies and nuclear facility operating organizations within the East China jurisdiction sent personnel to attend. The conference adhered to a problem-oriented and pragmatic-first approach. The East China Supervision Station organized participants to study the latest decisions and arrangements of the Party Central Committee on nuclear safety work, and, in light of the safety and quality conditions and important typical problems of nuclear facilities in East China in the first three quarters of 2026, proposed ideas for further improving nuclear facility safety work. The operating organizations focused on contractor management, fuel management, identification and response to extreme weather risks, and...

2026-10-23

Southwest Supervision Station of the National Nuclear Safety Administration Conducts Demonstrative Supervision of Radiopharmaceuticals

Recently, the Southwest Nuclear and Radiation Safety Supervision Station of the Ministry of Ecology and Environment (National Nuclear Safety Administration), together with the Department of Radiation Source Safety Supervision, the Nuclear and Radiation Safety Center of the Ministry of Ecology and Environment, and Chengdu University of Technology, organized representatives of enterprises in its jurisdiction to conduct demonstrative supervision of radiopharmaceutical (medical isotope) production. This initiative aims to serve the national "Medium- and Long-Term Development Plan for Medical Isotopes (2021–2035)" and comprehensively enhance the radiation safety management level of the nuclear medical industry in the Southwest region. It is reported that this supervision activity practiced the concept of research-based supervision. In response to the characteristics of the Southwest region—where R&D, pilot testing, and large-scale production proceed in parallel, and the safety risks of unsealed radioactive materials are complex—the activity involved pre-arranging production processes...

2026-10-22

CNNC Qintong Innovatively Builds a Digital-Intelligent Operation and Maintenance Management System for Its Isotope Base

Recently, Chinatom Qinshan Isotope Co., Ltd. (hereinafter referred to as "CNNC Qintong"), centering on the isotope production base construction project, successfully built a digital-intelligent operation and maintenance (O&M) management system with the Integrated Intelligent Production Information Management Platform (IMS) as its core. By empowering full-lifecycle equipment control and intelligent decision-making, the system effectively addresses O&M management pain points in nuclear technology application scenarios with high safety requirements and high complexity. It is understood that the system, with the Integrated Intelligent Production Information Management Platform (IMS) as its management hub, has achieved unified coding and labeling of 6,799 pieces of equipment across the entire plant and "one file per unit" full-lifecycle traceability. By deeply linking equipment ledgers with maintenance plans, repair work orders and spare parts management, CNNC Qintong has not only driven the upgrade of its maintenance model toward condition monitoring and predictive maintenance, but also achieved significant cost reduction, efficiency improvement and energy consumption optimization through HVAC variable-frequency renovation and self-developed automatic calibration platforms.

2026-10-22

US Nuclear Company Plans 6.6 GW Mega Nuclear Campus in Kentucky, Aims to Deploy Six AP1000 Reactors

The Nuclear Company, a US nuclear development and engineering delivery firm, officially unveiled on October 21 a grand energy complex plan to build a nuclear industrial campus with an installed capacity of up to 6.6 gigawatts (GW) in Lewis County, Kentucky. If fully realized, the project will become a super-large nuclear power base comprising as many as six Westinghouse AP1000 pressurized water reactor units, and its total installed capacity will surpass all nuclear power plants currently in operation in the United States. This nuclear development project, named Prosperity One, will adopt a phased construction model...

2026-10-22

ASEAN countries are comprehensively assessing nuclear energy development and deployment options

On October 21, 2026, at the World Nuclear Supply Chain Conference held in Manila, participating delegates pointed out that with the substantial growth in electricity demand and deepening energy security considerations, Southeast Asian countries are assessing nuclear energy options with a pragmatic attitude to diversify their power generation mix and safeguard regional energy supply. It is understood that data from the International Energy Agency (IEA) shows that since 2015, Southeast Asia's electricity demand has grown at an average annual rate of about 6%, and this trend is expected to continue until 2035. Rajib Dawood, Executive Director of the ASEAN Centre for Energy (ACE), stated that the geopolitical situation...

2026-10-22

Chasing the "Artificial Sun": Aerospace Xinli Fusion Key Component Project Approved as a Major Special Project of Guizhou Province

Recently, the project "Research on Key Components, Materials and Forming Processing Technology for Controlled Nuclear Fusion Devices," declared by Guizhou Aerospace Xinli Technology Co., Ltd., has been successfully approved as a 2026 Guizhou Provincial Science and Technology Major Special Project, marking a key step for the enterprise in deeply participating in the national future energy strategy and the localization of fusion equipment. The approved Science and Technology Major Special Project will take key components of the blanket system as its entry point, focusing on tackling materials and forming processes under extreme environments. The project advances simultaneously along three main lines: first, breaking through the development technology of special materials and components for the first wall that directly faces the plasma; second, overcoming the forming and processing challenges of core equipment such as blanket shielding blocks; third, establishing...

2026-10-22