home
Registration Registration REGISTER FOR THE CONFERENCE Apply to Exhibit Apply to Exhibit APPLICATION FOR EXHIBITION Sponsorship Sponsorship SPONSORSHIP APPLICATION

Nuclear Energy Highlights

View more >
India's cumulative nuclear power generation surpasses 1 trillion units (1000 BU), NPCIL sets historic milestone

India's cumulative nuclear power generation surpasses 1 trillion units (1000 BU), NPCIL sets historic milestone

Nuclear Power Corporation of India Limited (NPCIL) announced on August 4 that cumulative nuclear power generation since the start of commercial operations has exceeded 100 billion kilowatt-hours (1000 Billion Units, equivalent to 1 trillion kWh) for the first time. The company stated that this milestone marks a significant achievement on India's path toward clean and sustainable energy, corresponding to avoiding approximately 860 million tonnes of CO₂ emissions—equivalent to approximately taking 187 million gasoline and diesel passenger vehicles off the road for a full year, or nearly the total annual greenhouse gas emissions of a single industrialized nation such as Germany or Japan. NPCIL data shows that electricity generated through nuclear power has effectively avoided substantial greenhouse gas emissions. Nuclear energy is recognized as one of the low-carbon and reliable energy sources, playing a critical role in addressing climate change...

2026-08-05

Fusion

View more >
U.S. Team Proposes New In-Situ Cleaning Method for Porous Tungsten Walls in Fusion Devices

U.S. Team Proposes New In-Situ Cleaning Method for Porous Tungsten Walls in Fusion Devices

2026-08-05

Researchers from the U.S. Department of Energy's Princeton Plasma Physics Laboratory, Princeton University, and Pennsylvania State University have proposed an in-situ cleaning method for fusion system wall materials, which uses heating combined with neon plasma to remove contaminants from the surface of porous tungsten materials after components are installed and sealed within a vacuum chamber. The research findings have been published in *Nuclear Materials and Energy*. Image credit: Kyle Palmer / PPPL Communications Department. Fusion system walls must withstand extreme temperatures. Liquid lithium is considered a promising wall protection material, which can be retained within porous tungsten wall tile structures much like water absorbed by a sponge. However, this...

More >
Lifting Task of Large Storage Tanks in Cryogenic System Tank Area of HL-3 Upgrade Project Successfully Completed

Lifting Task of Large Storage Tanks in Cryogenic System Tank Area of HL-3 Upgrade Project Successfully Completed

2026-08-05

On August 4, the lifting task of large storage tanks in the cryogenic system tank area of the HL-3 upgrade project, undertaken by the Southwestern Institute of Physics (SWIP), was successfully completed. After two days and one night of continuous efforts, a total of 14 large storage tanks were precisely positioned, including 6 medium-pressure high-purity helium storage tanks of 100 cubic meters each, 2 cryogenic liquid nitrogen storage tanks of 100 cubic meters each, and 6 auxiliary helium storage tanks, with a total lifting tonnage exceeding 200 tons. The achievement of this key milestone marks significant phased progress in the installation of cryogenic system equipment. Once the cryogenic system is completed, it will provide stable and reliable cooling capacity for the neutral beam injection system and the toroidal cryopumps of the HL-3 device, effectively enhancing the neutral beam injection efficiency and...

More >
First H-mode plasma with ELMs achieved on WEST

First H-mode plasma with ELMs achieved on WEST

2026-08-04

Recently, the C13 experimental campaign on the French tungsten tokamak WEST achieved a major breakthrough, successfully producing H-mode plasmas with Edge Localized Modes (ELMs). This is a key step in preparing for plasma scenarios relevant to the International Thermonuclear Experimental Reactor (ITER) and future fusion power plants. Over the past nearly three months, scientists, engineers, and technicians from the French Alternative Energies and Atomic Energy Commission (CEA) at Cadarache, together with international collaborators, conducted the C13 experimental campaign. This campaign aimed to address a series of key scientific and technical challenges in magnetic confinement fusion, covering the behavior of plasma-facing components and advanced plasma scenarios. The experiments focused on...

More >
BlueStar Fusion Completes

BlueStar Fusion Completes "Angel+" Round Financing, High-Temperature Superconducting Stellarator Project Moves to Engineering Implementation Phase

2026-08-04

Recently, Hefei BlueStar Fusion Technology Co., Ltd. (BlueStar Fusion, hereinafter referred to as "BlueStar Fusion") completed an Angel+ round of financing on the scale of several hundred million RMB, with a post-investment valuation exceeding 3 billion RMB. Following the completion of this financing round, the company will continue to advance the verification of key components, engineering manufacturing, and full-system integration of the high-temperature superconducting stellarator, with the goal of initiating the construction of the Phase I high-temperature superconducting stellarator system by 2027. BlueStar Fusion was established in August 2025 and is primarily engaged in the R&D and engineering of high-temperature superconducting stellarator technology. The company has assembled a professional team of nearly 100 members, covering fusion physics, superconducting magnets, structures and precision manufacturing, cryogenic engineering, artificial intelligence, and other disciplines. Ex...

More >
American Fusion Inc Appoints Nuclear Diagnostics Expert as Strategic Advisor in Preparation for Texatron Testing

American Fusion Inc Appoints Nuclear Diagnostics Expert as Strategic Advisor in Preparation for Texatron Testing

2026-08-04

American Fusion Inc announced on August 3 that it has appointed Dr. Noah D'Amico as a strategic advisor to the company. The company stated that this move will strengthen its scientific, engineering, and advanced diagnostics team configuration, and support the next phase of its Texatron Fusion Engine testing program at Texas Tech University. After joining American Fusion Inc, Dr. D'Amico will continue his roles at Texas Tech University and BlankSlate Innovation, serving as Chief Operating Officer of BlankSlate Innov...

More >
Study Shows Sustained Deuterium Fusion in Palladium and Titanium Metal Foils at Ultra-Low Energies

Study Shows Sustained Deuterium Fusion in Palladium and Titanium Metal Foils at Ultra-Low Energies

2026-08-04

U.S. researchers have observed a low-energy deuterium fusion phenomenon in thin palladium and titanium metal foils: when the incident deuteron energy drops to levels where fusion reactions are generally expected to weaken significantly or even nearly cease, the reactions continue to occur. Experiments show that as incident energy decreases, the fusion rate does not continue to decline exponentially but instead enters a plateau region below approximately 2 keV. At the lowest detectable energy, the measured low-energy fusion rate exceeds predictions from isolated-nucleus models by more than 10^18 times. Image courtesy of Marina Light/University of California, Davis. The related research was conducted by teams at the University of California, Davis and Lawrence Berkeley National Laboratory...

More >

Nuclear Application

View more >

Tunisia Aims to Become Africa's NDT Benchmark with IAEA and Nuclear Science Center Support

To explore avenues for cooperation in Tunisia around non-destructive testing (NDT) and industrial applications of nuclear technology, the Technical Center for Mechanical and Electrical Industries (CETIME) hosted a joint delegation from the International Atomic Energy Agency (IAEA) and the National Center for Nuclear Science and Technology (CNSTN). This meeting was part of an initiative launched by these two organizations aimed at raising awareness and understanding of these technologies among institutions that use radioactive tracers and sources for industrial applications. The two sides focused on CETIME's work in non-destructive testing using radioactive sources, as well as joint projects aimed at advancing nuclear and radiation technologies applied to industry, non-destructive testing, and the enhancement of industrial quality. Through this...

2026-08-05

Senegal Seeks to Leverage Nuclear Energy to Boost Agricultural Productivity

Senegal is actively exploring the use of nuclear technology to enhance agricultural productivity. Facing numerous agricultural challenges, the country believes that nuclear science applications can effectively improve crop cultivation, soil health, and aquaculture, among other areas, with particular attention focused on the regional conference on nuclear science applications in agriculture held in Dakar from August 3 to 7. The event, organized by the Plant Biotechnology Laboratory led by Professor Diaga Diouf at UCAD University in collaboration with the International Atomic Energy Agency (IAEA), is part of the Atoms4Food initiative launched in 2023. The conference brought together university presidents, faculty deans, directors of national agricultural research centers, and other experts and scholars in related fields,...

2026-08-05

Eagle Nuclear Energy Announces Discovery of Largest Uranium Deposit in the United States

Eagle Nuclear claims to have discovered the largest uranium deposit in the United States, located at the border of Oregon and Nevada. The company states that it holds an interest in the Aurora Project, which is the largest conventional uranium deposit in the U.S. classified under measured and indicated standards. The deposit currently contains 32.75 million pounds of indicated resources and 4.98 million pounds of inferred resources, compliant with the U.S. Securities and Exchange Commission (SEC) S-K 1300 standards. Eagle Nuclear is submitting permit applications for drilling plans to federal and state regulators, targeting completion of a feasibility study in the second half of 2027. Following its recent public market listing, the company has strengthened its technical team, adding the Yukuskokon Professional Services advisory team, and expanded its existing agreements with BBA USA and SLR International.

2026-08-05

U.S. Uranium Corp.'s Lo Herma Project Uranium Resources Surge to 9.96 Million Pounds

U.S. Uranium Corp. announced a significant increase in uranium resources at its Lo Herma project in Wyoming, reaching 9.96 million pounds of U3O8. This growth is primarily attributed to a 72% increase in indicated resources, reflecting the company's growing confidence in project development. This update lays the groundwork for the feasibility study planned for 2026 and further solidifies its position in the nuclear fuel supply sector. The uranium resource estimate for the Lo Herma project shows indicated resources of 4.7 million pounds of U3O8, accounting for a significant portion of total resources. Through the integrated analysis of data from 120 drill holes during 2025-2026, the company has not only increased total resources but also added resources available for feasibility studies within potential mineralized zones...

2026-08-05

Russia Plans to Complete Domestic MRI Scanner Development by 2027

On August 1, Russian Prime Minister Mikhail Mishustin stated that Russia should complete the development of a domestically produced MRI scanner by 2027. Mishustin learned about the relevant progress during his visit to the Consultative Diagnostic Center in the Republic of Tyva. While inspecting the MRI equipment installed at the center, he asked Russian Health Minister Mikhail Murashko about the development of domestic devices. Murashko stated that the research and development work is being carried out by Rosatom, and noted that the device is expected to be completed next year. Mishustin then expressed hope that Russia would have its own domestically developed MRI scanner next year. If the device is completed as planned, it will be used in the field of medical imaging diagnostics.

2026-08-05

US Intermountain Health Opens New Outpatient Clinic in Las Vegas, Equipped with PET/CT and Linear Accelerator

Intermountain Health, headquartered in Salt Lake City, recently opened a new outpatient clinic in southwest Las Vegas. Named Badura Clinic, the facility spans approximately 90,000 square feet and is located in the Spring Valley area, marking the health system's first new construction project in Nevada. The three-story Badura Clinic officially opened following a ribbon-cutting ceremony and community open house on July 30. The clinic consolidates primary care and select specialty services previously dispersed across multiple locations in the Las Vegas Valley, offering more centralized medical care for children, adults, and senior patients. According to the introduction, the clinic's services include adult and...

2026-08-05