Search Results

Unit 2 of Romania's Cernavoda Nuclear Power Plant can only operate for about 5 more days due to the continuously declining water level of the Danube River

Unit 2 of Romania's Cernavoda Nuclear Power Plant is expected to operate for only about five days due to the declining water level of the Danube River. Romeo Urjan, the plant's director, stated that if the Danube's water level continues to drop at a rate of 2 to 3 centimeters per day, Unit 2 will soon cease operation. Unit 1 has already been shut down due to insufficient water flow. Urjan emphasized that despite this, Unit 2 continues to operate within normal parameters, and nuclear safety is not under any threat. To alleviate the situation, relevant authorities are preparing to deploy four barges to divert more water to the plant, hoping to raise the water level by 7 to 8 centimeters, thereby extending the plant's operating time. Related...

2026-08-04

Second Ring of Steel Containment Vessel for Reactor Building of Unit 2 at Xudabao Nuclear Power Plant Successfully Hoisted into Place

At 9:57 on August 4, the second ring of the steel containment vessel (hereinafter referred to as CV Ring 2) for the reactor building of Unit 2 at Xudabao Nuclear Power Plant was successfully hoisted into place. The CV Ring 2 hoisted this time is the third ring segment of the steel containment vessel for Unit 2, with a hoisting weight of nearly 890 tons. During the assembly phase, the installation of multiple discipline items, including annular air ducts, steel structural annular corridors, and U-shaped supports for air turbulence, was completed simultaneously for this module, effectively reducing the risk of cross-operation interference in subsequent internal construction of the nuclear island. This approach fully leveraged the advantages of modular construction and effectively translated the concept of "modularize wherever applicable, prefabricate wherever installable" into tangible engineering outcomes. During the assembly and hoisting of CV Ring 2 for Unit 2, Liaoning Nuclear Power, in collaboration with...

2026-08-04

Moscow Cable Company Shield to Supply 4 km of Busbar Trunking for Units 3 and 4 of Leningrad NPP Phase II

Moscow Cable Company (Shield) will supply four kilometers of transmission lines for the Leningrad Nuclear Power Plant. The company will manufacture 10 kV and 24 kV generator voltage transmission lines for Units 3 and 4 of Leningrad NPP Phase II. These transmission lines meet the highest reliability and safety requirements of the nuclear industry and are equipped with current transformers and voltage transformers produced by Cable Shield Company. The transmission lines will be manufactured at the enterprise in the city of Kovrov, where new production capacity for cable trays was built last year. Currently, the plant's annual production capacity reaches 12,000 meters of cable trays. According to statistics, over 400,000 meters of transmission lines produced by the company have been put into operation...

2026-08-04

Enzychem Lifesciences Signs MOU with Korea Institute of Radiological & Medical Sciences to Jointly Develop Radiation-Induced Dermatitis Treatment

Enzychem Lifesciences announced on August 4 that it has signed a Memorandum of Understanding (MOU) with the Korea Institute of Radiological & Medical Sciences (KIRAMS) for joint research on a treatment for radiation-induced dermatitis. Based on their respective research capabilities and expertise, the two parties will explore the feasibility of developing a treatment for radiation-induced dermatitis and advance joint new drug research. Radiation-induced dermatitis is one of the most common treatment-related side effects in cancer patients undergoing radiation therapy, manifesting as skin erythema, pain, itching, and peeling. In severe cases, it can delay or interrupt radiotherapy schedules, not only reducing patients' quality of life but also negatively affecting the treatment process. The treatment has recently...

2026-08-04

Uranium Levels Exceed Standards in Water Supply on Seogyeom Island, Ganghwa County, Incheon; Government Denies Impact from North Korea's Pyongsan Uranium Mine Wastewater

Uranium levels exceeding standards have been detected in the water supply facilities at the groundwater source on Seogyeom Island, Ganghwa County, Incheon, and the government has stated that this is not attributable to wastewater from North Korea's Pyongsan uranium plant. According to the Ministry of Climate and Energy Environment, a recent detection at the Seogyeom Island water supply facility recorded a uranium concentration of 45 micrograms per liter, exceeding the drinking water quality standard of 30 micrograms per liter. The government stated that, following concerns raised over wastewater discharge from the Pyongsan uranium plant, the Nuclear Safety and Security Commission has conducted monthly regular inspections since July 2025, and quarterly inspections starting in 2026. The most recent inspection (June 2026) showed uranium concentrations ranging from 0.133 to 3.025 micrograms per liter at seven points, including the downstream Han River and areas near Ganghwa Island...

2026-08-04

Bulgarian Energy Minister to Inspect Unit Operations at Kozloduy Nuclear Power Plant

Bulgaria's Ministry of Energy announced on August 3 that Energy Minister Iva Petrova will visit the Kozloduy Nuclear Power Plant on August 4. Experts from the Ministry of Energy, along with representatives of the management of Bulgarian Energy Holding (BEH) and the Electricity System Operator (ESO), will accompany her. According to the Bulgarian Ministry of Energy, the visit will focus on understanding the current operational status of Units 5 and 6 at the Kozloduy Nuclear Power Plant, assessing the impact of the abnormally low Danube River water level on plant operations, and reviewing measures taken by the Ministry to ensure the security of Bulgaria's electricity system. On August 2, the Bulgarian Ministry of Energy stated that despite the Danube River water level dropping to a historic low, the two nuclear units at the Kozloduy Nuclear Power Plant...

2026-08-04

Syntec Optics Secures Fusion Energy Orders, AI Data Center-Related Orders Exceed $4 Million

Syntec Optics Holdings, a U.S. custom manufacturer of high-precision optics and photonics, announced on August 3 that it has recently secured a new batch of fusion energy-related orders, with order volume reaching 7 times the amount of similar orders at the end of last year. According to the company, this round of renewed orders involves special optical components for fusion reactors. These components will serve compact high-performance fusion reactors, helping related equipment conduct observation and control in extreme high-temperature environments. Fusion reactor operating environments feature extremely high temperatures, imposing stringent requirements on the precision, stability, and reliability of optical devices. Syntec Optics stated that since entering...

2026-08-04

Lifting of Steel Liner Module 1 for Unit 4 of Guangdong Taipingling Nuclear Power Plant Successfully Completed

A key construction milestone was reached at the Guangdong Taipingling nuclear power construction site, where the 2,000-tonne crawler crane of CNNC Machinery Engineering precisely completed the lifting and positioning of Steel Liner Module 1 for Unit 4 of Guangdong Taipingling Nuclear Power Plant. The entire lifting operation lasted 2 hours and 12 minutes, with smooth and orderly lifting, lowering, and slewing movements, and strict control over safety and quality throughout the process, marking the official commencement of main structure construction for the nuclear island reactor building. As the core barrier of the reactor containment, the steel liner module safeguards the nuclear safety defense line, and modular lifting is also a key technical step in the batch construction of Hualong One reactors. The steel liner module lifted this time integrates the base plate in one formed piece, featuring a large diameter, thin shell wall, and relatively low stiffness...

2026-08-04

CGN Dasheng NDT Helps Power Batteries Pass Quality Tests Smoothly

News of new energy vehicle fires occasionally surfaces, and the culprit is almost always the power battery. To fundamentally address this industry-wide problem, the mandatory national safety standard "Safety Requirements for Traction Battery of Electric Vehicles" will officially take effect on July 1, 2026, ushering in the strictest examination the battery industry has ever faced. Facing high-standard testing requirements, CGN Dasheng has deployed its full suite of non-destructive testing capabilities, leveraging precise and comprehensive non-destructive flaw detection technologies to help the industry deliver a high-standard safety answer sheet. The internal structure of a power battery is wound layer upon layer, resembling a Swiss roll. During production, subtle defects such as electrode foil wrinkles, metal debris contamination, and misalignment between positive and negative electrodes may occur. These "minor issues" can evolve into overheating,...

2026-08-04

CGN Dasheng Launches Nondestructive Testing Solutions for Power Batteries to Address New Safety Requirements for Electric Vehicle Batteries

The national mandatory safety standard "Safety Requirements for Traction Batteries for Electric Vehicles" officially takes effect on July 1, 2026, further raising the requirements for power battery safety inspection. In response to the needs for internal defect identification, fault tracing, and in-line production testing, CGN Dasheng Accelerator Technology Co., Ltd. has launched multiple nondestructive testing solutions, utilizing X-ray imaging, industrial CT, and electron beam scanning microfocus X-ray source technologies to provide inspection means for power battery quality control. The internal structure of power batteries is complex, with cells typically composed of multiple layers of materials wound or stacked. During production, subtle defects such as electrode plate wrinkles, metal debris contamination, positive-negative electrode misalignment, and welding porosity can...

2026-08-04

Zhongji Flash e-Flash 200A Enters Innovative Medical Device Special Review Program

Recently, the public notice period for the review results of applications for the Innovative Medical Device Special Review Program by the Center for Medical Device Evaluation of the National Medical Products Administration has concluded. The ultra-high dose rate electron beam radiotherapy system (e-Flash 200A), independently developed by Zhongji Flash Medical Technology Co., Ltd., has officially entered the Innovative Medical Device Special Review Program. According to reports, the e-Flash 200A is China's first ultra-high dose rate electron beam FLASH radiotherapy device and had previously been included in the "Global New" green channel. Its entry into the Innovative Medical Device Special Review Program signifies further recognition of the product's technological innovation and clinical application value. The system is designed for superficial tumor radiothe...

2026-08-04

Key Breakthroughs Achieved in Development of Core Equipment for BEST Compact Fusion Energy Test Facility

Recently, at a critical juncture in the all-out sprint toward the "double-half" goals, the development of two core components of the compact fusion energy test facility (BEST) main machine equipment—the vacuum vessel and the mid-plane thermal shield—undertaken by Shanghai Electric Nuclear Power Group and manufactured by No.1 Machine Tool Plant, has achieved successive milestone results. Multiple key manufacturing tasks have been successfully completed and delivered upon acceptance, marking that the development of BEST main machine core equipment has fully entered the critical stage of tackling difficulties and accelerating the sprint, laying a solid foundation for high-quality project delivery. As the core key equipment of the compact fusion energy test facility, the BEST vacuum vessel and mid-plane thermal shield feature complex structures, extremely high precision requirements, and difficult manufacturing processes...

2026-08-03

Central Commission for Discipline Inspection and National Supervisory Commission: Toward Innovation and Green Development, Empowering All Industries with Nuclear Energy

Important DiscourseThe nuclear industry is a high-tech strategic industry and a crucial cornerstone of national security. We must adhere to safe development and innovative development, persist in the peaceful use of nuclear energy, comprehensively enhance the core competitiveness of the nuclear industry, and write a new glorious chapter for China's nuclear industry. Empowering All Industries with Nuclear Energy: A Visit to the World's Largest Large-Scale Coupling Demonstration Base of Nuclear Energy and Petrochemical Industry. Panoramic view of the nuclear island of Unit 1 of CNNC Suneng Jiangsu Xuwei Nuclear Heating and Power Plant. Interior view of the nuclear island of Unit 1 of CNNC Suneng Jiangsu Xuwei Nuclear Heating and Power Plant. Rendering of CNNC Suneng Jiangsu Xuwei Nuclear Heating and Power Plant. Night view of Lianyungang Petrochemical Industry Base (All photos provided by CNNC). On the coast of the Yellow Sea, Lianyungang, Jiangsu Province...

2026-08-03

2026 Special Training Course on Radiation Safety Practices for Nuclear Technology Utilization Held in Xi'an

To thoroughly implement the Ecological Environment Code and further enhance radiation safety management in the field of nuclear technology utilization, the 2026 Special Training Course on the Application of the Ecological Environment Code and Radiation Safety Practices for Nuclear Technology Utilization, hosted by the Nuclear and Radiation Safety Center of the Ministry of Ecology and Environment (hereinafter referred to as the Center), was successfully held in Xi'an, Shaanxi Province, from July 27 to 30. Nearly one hundred trainees from 67 institutions nationwide, including ecological environment departments, research institutes, medical facilities, and environmental impact assessment (EIA) compilation agencies, gathered together to study the new regulations and discuss practical matters, empowering the industry's high-quality development. This training closely followed the pulse of industry development, focusing on the new situations and challenges...

2026-08-03

Cambodian Customs Delegation Visits Jiangsu to Study Smart Customs and Scanning Inspection Technologies

The General Department of Customs and Excise of Cambodia recently organized a delegation for a working visit to Jiangsu Province, China, focusing on smart customs development and advanced scanning inspection technologies, with the aim of advancing Cambodia's customs modernization reform and digital transformation, enhancing trade facilitation and customs supervision capacity. According to the General Department of Customs and Excise of Cambodia, from July 27 to 31, Kun Nhem, Special Representative of the Cambodian Prime Minister and Director General of Customs and Excise, led a delegation to visit Jiangsu Province and conducted an inspection and exchange at Nuctech Company Limited. The visit was intended to understand the application of smart customs systems and customs inspection technologies in actual operations, in support of Cambodia's Customs Reform...

2026-08-03