Search Results

Rosatom Continues Construction of New Units at Iran's Bushehr Nuclear Power Plant

Rosatom Director General Alexey Likhachev stated that the state atomic energy corporation is continuing construction of new units at Iran's nuclear power plant. In his address to nuclear industry workers and retirees on the occasion of the 81st anniversary of the Russian nuclear industry, Likhachev said that Rosatom is still building nuclear power plants in Egypt, Hungary, Iran, and India, while also launching new construction projects in Uzbekistan and Kazakhstan. According to relevant information, the second and third units of Iran's Bushehr Nuclear Power Plant are being built with Rosatom's participation. The Bushehr plant is one of Iran's key nuclear power projects, and the construction of new units is...

2026-08-21

Russia Plans to Add Approximately 30 GW of Nuclear Power Capacity and Expand Regional Deployment

Russian President Vladimir Putin stated at a meeting on nuclear energy development that Russia will continue to uphold high standards of nuclear power plant safety and reliability, and plans to add approximately 30 GW of nuclear power capacity, including small modular reactors. Putin said the new capacity will not only replace units approaching the end of their service life, but also significantly increase Russia's total nuclear power generation capacity. Russia also plans to expand the geographical deployment of nuclear power units, building a new generation of nuclear power plants in the Urals, Siberia, and the Far East to provide affordable clean electricity to these regions. He also noted that Russia will strengthen...

2026-08-21

Hainan Changjiang Nuclear Power Unit 4 500kV Reverse Power Transmission Successfully Completed

On August 19, 2026, the 500kV reverse power transmission of Unit 4 of the Hainan Changjiang Nuclear Power Phase II Project was successfully completed, marking another major milestone in the engineering construction of the unit. The 500kV reverse power transmission operation lasted approximately 15 hours. Throughout the power receiving process, equipment operated stably, all parameter indicators were excellent, protection devices acted accurately without error, and system live switching proceeded smoothly, fully achieving the established goal of successful power reception on the first attempt. The realization of this milestone fully verified that the design, manufacturing, and installation quality of the 500kV main switchyard, main transformers, high-voltage auxiliary transformers, and related auxiliary systems of Unit 4 all met the required standards. The Hainan Project Department of CNNC Engineering coordinated design, procurement, construction,...

2026-08-21

Atom High-Tech and CNNC Headway Visit Tsinghua University for Business Cooperation Exchange

On August 17, Luo Xu, General Manager of Atom High-Tech, and Liu Wen, Chairman of CNNC Headway, led a delegation to Tsinghua University for a business cooperation exchange with the School of Biomedical Engineering. Hu Ye, Dean of the School of Biomedical Engineering, and Ma Kai, Associate Professor of the School, attended the exchange. The visit aimed to leverage the research and talent advantages of a top-tier university, promote deep integration of industry, academia, and research, and jointly explore new cooperation opportunities in the fields of nuclear medicine and biomedical engineering. During the exchange meeting, Atom High-Tech and CNNC Headway respectively introduced their corporate development histories, core business layouts, and future strategic plans. Subsequently, Dean Hu Ye and Associate Professor Ma Kai respectively introduced...

2026-08-21

Construction of the conventional island raft foundation slab for Unit 2 of Zhejiang Jinqimen Nuclear Power Plant completed

At 3:36 on August 20, the raft foundation slab pouring for the conventional island of Unit 2 at Zhejiang Jinqimen Nuclear Power Plant was successfully completed. With the final batch of concrete precisely placed into the formwork, the main structure construction of the conventional island for this unit was officially initiated. The concrete supply for this pouring operation was provided by CNNC Concrete Xiangshan Branch. The operation lasted 29 hours and 20 minutes, with a cumulative supply of over 4,000 cubic meters of concrete, achieving continuous and stable material delivery. The maximum pouring thickness at this section was 3 meters, with a height difference of 7 meters at the variable cross-section locations, and the structural design service life is 60 years. The project features large-volume, high-intensity construction characteristics, compounded by the rainy climate conditions on site, imposing stringent requirements on concrete supply continuity, delivery stability, and temperature control precision.

2026-08-21

Automatic Radiation Environment Monitoring Station in Mianyang, Sichuan Put into Trial Operation, with Core Equipment and Systems Achieving Domestic Localization

Recently, the automatic radiation environment monitoring station located within the Nuclear Medical Health Industrial Park of the China (Mianyang) Science and Technology City was officially put into trial operation. As the first automatic radiation environment monitoring station in Sichuan Province to fully achieve domestic localization of core equipment and systems, it will provide radiation environment safety assurance for the development of the nuclear medical industry in the park through 24-hour uninterrupted automatic monitoring capabilities. At the automatic radiation environment monitoring station, operational data from equipment such as environmental γ dose rate monitors are updated in real time on monitoring screens. Compared with the previous approach that relied on manual on-site sampling and batch laboratory analysis, the automatic station enables continuous monitoring, reducing the time required to produce monitoring results from several days to the same day, thereby improving...

2026-08-20

Full-Life Technologies Completes Construction of Belgian Radiopharmaceutical Production Facility and Initiates Accelerator Commissioning

Full-Life Technologies (hereinafter referred to as "Full-Life"), a privately held, fully integrated, clinical-stage international radiopharmaceutical therapy company, announced on August 20 that its radiopharmaceutical production facility in Gembloux, Belgium, has completed construction and received authorization to commence accelerator commissioning and enter the initial ramp-up phase. (Full-Life Technologies Belgium Radiopharmaceutical Production Facility) This milestone marks a significant step forward in Full-Life's vertically integrated radioisotope production capabilities moving toward formal operational status. With the completion of facility construction, the company has entered the next phase of operational preparation, including accelerator installation, phased commissioning, and validation of critical safety and operational systems.

2026-08-20

Berkeley Lab Leads Development of Portable Active-Source Muon Imager

The U.S. Department of Energy's Lawrence Berkeley National Laboratory and Ideon Technologies have received funding from the DOE's Advanced Research Projects Agency-Energy (ARPA-E) to jointly develop a field-deployable active-source muon imaging technology through the Reliable Ore Characterization Using Cornerstone Sensing Technologies (ROCKS) program. The three-year project aims to enhance the detection and characterization of underground critical mineral resources. Image credit: Lawrence Berkeley National Laboratory. Muons are subatomic particles with strong penetrating capability. Previously, Ideon Technologies has used passive muons produced by cosmic rays in the atmosphere for ore body imaging in the mining sector, mapping mineral deposits and analyzing subsurface structures. However, passive muons primarily arrive from above, limiting detection angles; additionally, the natural flux is low—approximately one per square centimeter per minute—and imaging often requires days, weeks, or even months.

2026-08-20

Korean Research Team Reveals Mechanism Behind Neutron Irradiation-Induced Reliability Degradation in Ferroelectric AI Semiconductors

Jeonbuk National University announced on the 20th that a research team led by Professor Bae Hak-yeol from the Department of Electronic Engineering at its College of Engineering, in collaboration with Professor Kim Tae-wan's team at Seoul National University and Q-Beam Solution, a startup affiliated with the Korea Atomic Energy Research Institute, conducted a joint study analyzing the causes of performance degradation in next-generation ferroelectric memory and neuromorphic semiconductor devices under neutron irradiation. The findings have been published in the latest issue of ACS Applied Electronic Materials. Ferroelectric semiconductors, which can maintain their polarization state even after power is disconnected, are considered a key candidate for next-generation non-volatile memory and neuromorphic computing devices. Neuromorphic computing aims to simultaneously implement both memory and computation within a single device...

2026-08-20

IsoEnergy and DISA Complete Transaction to Launch U.S. Uranium Recovery and Production Company DISA Uranium

On August 19, IsoEnergy Ltd. and DISA Technologies, Inc. announced the completion of their previously disclosed transaction to form DISA Uranium Corporation. The new company is positioned as a technology-driven U.S. uranium enterprise, aiming to strengthen domestic uranium supply and serve the growing demand for domestically sourced nuclear fuel. Under the definitive agreement, IsoEnergy transferred its portfolio of permitted and previously producing conventional uranium assets in Utah, U.S., to DISA Uranium in exchange for 1,677,350 common shares of DISA Uranium. The asset portfolio includes the Tony M Mine, Daneros Mine, Rim Mine, Sage Plain Project, and Flatiron Project. Upon completion of the transaction...

2026-08-20

IAEA Launches Research Project on Edible Insects and Novel Foods Safety

As global demand for alternative protein sources rises, the International Atomic Energy Agency has recently launched a five-year coordinated research project focusing on assessing safety risks associated with edible insects and other novel foods during production, processing, and consumption. The project will be implemented through the Joint FAO/IAEA Centre of Nuclear Techniques in Food and Agriculture, utilizing nuclear techniques, isotope techniques, and related detection methods to analyze chemical, biological, and physical hazards in food. Currently, more than 2,000 species of edible insects are known globally, and approximately 2 billion people regularly consume insects. In Africa, Asia, the Pacific region, and Latin America, insects have long been part of the diet in some communities...

2026-08-20

West Engineering Delivers 30 Relay Protection and Automation Cabinets for Unit 2 of Akkuyu NPP

West Engineering has completed the next stage of equipment delivery for Unit 2 of the Akkuyu Nuclear Power Plant in Türkiye, shipping 30 relay protection and automation cabinets to the project site. The equipment will be used for the protection, monitoring, and control of critical electrical components of the power unit. The delivered equipment includes AZ-PZ cabinets for generating analog and discrete information, power supply unit protection device cabinets, power unit measurement device cabinets, synchronizing relay cabinets, generator switch control cabinets, electrical process recording cabinets, and control current distribution cabinets, among others. According to reports, this batch of nuclear facility equipment has been designed with high safety margins and fault tolerance in mind. The supplied relay protection and automation systems comply with relevant international standards, with a safety class of 3H/N, meeting the NP-001-15 standard; the quality assurance category is QA3, and the equipment has undergone multi-stage quality control from material and component selection to acceptance testing.

2026-08-20

Energy Fuels' Utah Plant's Terbium Oxide Certified by Japanese Rare Earth Permanent Magnet Manufacturer

On August 19, U.S. critical materials producer Energy Fuels Inc. announced that the terbium oxide produced at its White Mesa plant in Utah has passed all certifications from a Japanese rare earth permanent magnet manufacturer, enabling its use in commercial rare earth permanent magnet production without further qualification or verification. According to the company, this Japanese manufacturer is one of the world's largest rare earth permanent magnet producers outside China. Energy Fuels stated that the certification of its terbium oxide demonstrates that its heavy rare earth product quality and rare earth processing capabilities have been recognized by downstream users. The company's previously produced neodymium-praseodymium oxide and dysprosium oxide have also obtained qualification certifications for use in rare earth permanent magnet manufacturing. Terbium is one of the important heavy rare earth elements, primarily used to enhance the heat resistance and performance of high-strength neodymium-iron-boron permanent magnets. Neodymium-iron-boron permanent magnets are widely used in automotive, advanced electronics, robotics, aerospace, and other sectors. According to Benchmark Mineral Intelligence's European CIF price data, the current market price of terbium oxide is approximately $5.5 million per metric ton.

2026-08-20

OECD Nuclear Energy Agency and the United States to Co-Host "New Nuclear Roadmap 2026" Conference

The OECD Nuclear Energy Agency (NEA) and the United States will co-host the New Nuclear Roadmap 2026 conference on September 17-18, 2026, in Paris, France. The conference will bring together ministers, senior government representatives, industry leaders, investors, experts, and relevant stakeholders to discuss the policy, industrial, and financial conditions required for the large-scale deployment of new nuclear capacity. U.S. Secretary of Energy Chris Wright stated that the world needs more energy and that nuclear energy will play an important role in addressing this demand. The U.S. Department of Energy will co-host the conference with partners to advance nuclear innovation, strengthen international cooperation, and continue to promote global nuclear energy development...

2026-08-20

Installation of Cooling Tower Basins Completed at Rostov NPP Unit 4

The mechanical draft cooling tower project at Unit 4 of Russia's Rostov Nuclear Power Plant has recently completed the installation of all four basins, bringing the overall civil and installation readiness of the project to 80%. The facility will provide supplementary cooling capacity for Unit 4 during summer high temperatures and peak electricity demand in southern Russia. Rostov NPP is part of Rosenergoatom, the operator of Russian nuclear power plants, which is a member of the electric power division of Rosatom, Russia's state atomic energy corporation. Under the project plan, the new mechanical draft cooling tower will operate in conjunction with the existing natural draft evaporative cooling towers to enhance the unit's operational stability under high-temperature conditions. Rostov NPP's capital construction...

2026-08-20