Search Results

Construction of Access Tunnels Commences for Phase III of Taipingling Nuclear Power Project

On August 26, 2026, CGN's Guangdong Taipingling Nuclear Power Plant held a mobilization meeting for the construction of its Phase III project. At the meeting, the "Safety and Quality Responsibility Agreement for the Construction and Operation of CGN Guangdong Taipingling Nuclear Power Plant Phase III Project" was unveiled, aiming to further consolidate safety and quality responsibilities in nuclear power engineering construction, strengthen project quality management, and ensure the safe and orderly progress of project construction. At the mobilization meeting, Zhang Guoqiang, Secretary of the Party Committee and Chairman of CGN Huizhou Nuclear Power Co., Ltd., announced the official commencement of access tunnel construction for the Phase III project. Upon completion of the access tunnel construction, it will help improve the organizational efficiency of project construction in areas such as material transportation and module hoisting, and create conditions for the subsequent pouring of the first batch of nuclear island concrete.

2026-08-27

Fifth Mega Saltstone Disposal Unit Approved for Operation at U.S. Savannah River Site

The U.S. Department of Energy Office of Environmental Management announced on August 25 that it has approved the operation of the fifth mega saltstone disposal unit at the Savannah River Site in Aiken, South Carolina. Designated as SDU 10, the facility will receive purified material for final disposal, marking a new milestone in the site's cleanup program. According to reports, SDU 10 completed construction in June 2024, nearly 10 months ahead of schedule. Its leak-tightness testing was completed in December 2025, and the test results verified that the unit can safely store up to 33 million gallons of purified, solidified salt solution generated at the Savannah River Site. Saltstone disposal units are the end-stage facilities in the salt waste treatment process.

2026-08-26

Bitumen Solidification Facility at Unit 2 of Japan's Ikata Nuclear Power Plant Returns to Normal

Shikoku Electric Power Co. reported on August 25, 2026, that the bitumen solidification facility at Unit 2 of Japan's Ikata Nuclear Power Plant, currently in a decommissioned state, had returned to normal operation at 10:45 a.m. that day. The gasket at the joint of the mixer top cover, where the earlier abnormality had been detected, had been replaced, and trial operation results showed no abnormalities. The incident occurred on April 28. On that day, when operators started the bitumen solidification facility in the controlled area of the reactor auxiliary building, they observed a steam-like phenomenon near the mixer thermometer, which subsequently disappeared on its own. Maintenance personnel later inspected and confirmed at 3:05 p.m. that the steam-like gas originated from inside the mixer and had escaped through the joint of the mixer top cover; at 5:06 p.m., the bitumen solidification facility was shut down.

2026-08-26

U.S. Develops Hybrid Process Combining Electroforming and 3D Printing for Critical Component Manufacturing in Advanced Nuclear Reactors

On August 24, local time, the U.S. Department of Energy's Oak Ridge National Laboratory (ORNL) announced that its scientists are collaborating with AJ Tuck Company (AJ Tuck) to develop a hybrid manufacturing process that combines 3D printing and electroforming to produce complex, leak-tight hot isostatic pressing canisters for powder metallurgy hot isostatic pressing processes. The process targets the manufacturing of critical metal components for advanced nuclear reactors and other energy and defense applications, with the goal of shortening production workflows and reducing reliance on traditional large-scale forging and casting supply chains. A hot isostatic pressing canister is a type of sealed container used to compact metal powders into high-performance metal components under high temperature and high pressure. Traditional hot...

2026-08-26

Fujifilm Launches New X-ray Bone Densitometer for Early Osteoporosis Screening

Fujifilm Corporation announced on August 26 that it has begun selling a new X-ray bone densitometry device designed to measure bone density in areas such as the lumbar spine and femur, supporting early detection of osteoporosis and fracture risk assessment. According to the company, the X-ray bone densitometer measures bone density using X-rays and is an important diagnostic tool for osteoporosis. The newly launched model is Fujifilm's first new device of this kind since 2018 and will be sold through its subsidiary Fujifilm Medical, with a price of approximately 20 million yen, varying depending on system configuration. The new device incorporates artificial intelligence technology, enhancing automated analysis functions. In the analysis of scanned images...

2026-08-26

South Korean 3D-Printed Nuclear Power Plant Component Operates Continuously for 18 Months

Korea Hydro & Nuclear Power (KHNP) announced on August 26 that a nuclear power plant component manufactured using 3D printing technology has been in continuous operation for 18 months on a reactor unit. This marks the first time South Korea has completed long-term operational validation of a 3D-printed nuclear power plant component in actual service. The component is a multi-blade impeller used to cool the generator circuit breaker of a nuclear power plant. Traditional impellers typically consist of multiple blades mounted on a fixed plate, and the connection points between the fixed plate and blades are at risk of damage during long-term operation. KHNP completed the development of this impeller in 2024, switching to 3D printing to manufacture an integrated one-piece structure, thereby reducing weak connection points and improving component durability. Before being put into service, this 3D-printed impeller underwent...

2026-08-26

Guohe Series Nuclear Power Engineering Modular Quarterly Meeting and Construction Technology Innovation Application Exchange Conference Successfully Held in Qidong

On August 21, the Guohe Series Nuclear Power Engineering Modular Quarterly Meeting and Construction Technology Innovation Application Exchange Conference, hosted by Shanghai Nuclear Engineering Research and Design Institute (SNERDI) and organized by China Nuclear Industry Fifth Construction Co., Ltd. (CNF), was successfully held in Qidong, Jiangsu Province. Zhang Shoulong, Deputy General Manager and Safety Director of SNERDI, Li Jun, Deputy General Manager of China Nuclear Engineering Corporation (CNEC), and Liu Weihua, Chief Engineer of CNF, attended the meeting. More than 50 representatives from various nuclear power construction participating units gathered to discuss the innovation and practical application of nuclear power modular construction technology. At the meeting, the implementation of action items from the previous quarter was first reviewed, followed by progress reports on key work items including dry construction, plugging modularization, module design guidance manual, and multi-discipline shared rack design optimization. Each nuclear power project department then reported on quarterly work progress and subsequent work plans in turn; participating construction units including China Nuclear Industry 22nd Construction Co., Ltd., China Nuclear Industry 23rd Construction Co., Ltd., and CNF conducted thematic exchanges on modular construction, automatic welding technology, implementation of innovative technologies, and the "7050" plan (70% of all plant welding joints as prefabricated joints, and 50% of all plant prefabricated joints welded by automatic welding). Departments of SNERDI and participating partner units conducted in-depth discussions, exchanging views on key challenges in nuclear power modular construction and building consensus on technical breakthroughs. During the meeting, all attending representatives visited the Jiangsu Heneng Qidong Intelligent Manufacturing Base for on-site inspection, observing the intelligent manufacturing production line construction and gaining direct insight into the practical achievements of modular prefabrication and intelligent manufacturing processes. The meeting fully affirmed the phased achievements made by all participating units in the field of Guohe series nuclear power modular construction, pointed out that modular construction is a key driver for improving quality and efficiency in nuclear power engineering, and made arrangements for the next phase of work, emphasizing that all participating units should continue to deepen EC (Engineering-Construction) collaboration and integrated construction-installation development, and strengthen collaborative coordination to fully guarantee the high-quality construction of Guohe series nuclear power projects.

2026-08-26

Liaoning Zhuanghe Nuclear Power Enters Construction Preparation Phase, Expected to Complete 2 Billion Yuan in Project Investment by Year-End

On August 22, 85 heavy and light engineering machinery units entered the site simultaneously to carry out topsoil clearing work on 179,000 square meters of land, marking the official entry of the Liaoning Zhuanghe nuclear power project into the construction preparation phase. Rendering of the Liaoning Zhuanghe nuclear power project. The Liaoning Zhuanghe nuclear power project is the first nuclear power project in Northeast China to adopt the Hualong One, China's self-developed third-generation nuclear power technology. The project plans to build six million-kilowatt-class nuclear power units in three phases, with a total investment of approximately 125 billion yuan. The first phase will construct two units with a total investment of approximately 44.56 billion yuan. It was approved at the executive meeting of the State Council on July 31, received formal approval from the National Development and Reform Commission on August 13, and obtained the advance land use approval from the Liaoning Provincial Department of Natural Resources on August 20, meeting the legal conditions for land construction.

2026-08-25

Indonesian UGM Student Travels to Canada to Study Nuclear Energy Program Development

Marcchelino Chrisrichy Cosmo Hutama, a nuclear engineering student at Gadjah Mada University (UGM), has been selected for the 2026 Nuclear Innovation Bootcamp (NIB 2026). Organized by the Nuclear Innovation Alliance, the bootcamp will be held from July 26 to August 8, 2026, at McMaster University in Hamilton, Ontario, Canada. Marcchelino is the only Indonesian participant among the 26 trainees from 13 countries in this year's cohort. The bootcamp focuses on nuclear...

2026-08-24

Kyoto Fusioneering Completes 25.72 Billion Yen Series D Funding Round

Japanese fusion startup Kyoto Fusioneering announced on August 24 that it has completed the first closing of its Series D funding round, with total financing of 25.72 billion yen. Of this amount, equity financing totaled 16.72 billion yen and debt financing totaled 9 billion yen, with the debt portion comprising credit lines and loan facilities. With this, the company's cumulative equity financing has reached 32.98 billion yen. Following this funding round, Kyoto Fusioneering is valued at approximately 120 billion yen, a significant increase from its pre-funding valuation, making it the first startup in Japan's fusion sector to exceed a valuation of 100 billion yen. The company has previously secured contracts exceeding 14 billion yen cumulatively in markets such as North America and Europe, and has set a short-term sales target of approximately 10 billion yen.

2026-08-24

Ukrainian Foreign Minister and IAEA Director General Discuss Zaporizhzhia Nuclear Power Plant Safety in Phone Call

Ukrainian Foreign Minister Andrii Sybiha said on August 22 that he had a phone call with International Atomic Energy Agency (IAEA) Director General Rafael Grossi, during which the two sides focused on the current nuclear safety situation in Ukraine, particularly the safety status of the Zaporizhzhia Nuclear Power Plant. Sybiha stated that the Zaporizhzhia Nuclear Power Plant is currently under Russian control, and the related military presence remains a major source of nuclear safety risk. The two sides exchanged views on issues related to the plant and emphasized the need for close coordination based on respect for Ukraine's sovereignty and international law. Sybiha also noted that he values Grossi's personal engagement in relevant matters, as well as...

2026-08-24

Japan's GX Promotion Organization Invests in Nuclear Fusion Startups

Japan's Green Transformation Promotion Organization (GX Promotion Organization) has invested in two startups, focusing on nuclear fusion-related technology and plastic recycling businesses respectively. The public funds invested are expected to be approximately 3 billion yen; when private sector funds are included, the total related investment is expected to reach approximately 20 billion yen. The two companies are Kyoto Fusioneering and JEPLAN. Among them, Kyoto Fusioneering is primarily engaged in the development of nuclear fusion engineering technology, while JEPLAN is involved in circular economy businesses such as plastic recycling. Details of the investment are expected to be officially announced by the relevant parties. This investment is seen as part of Japan's push to industrialize its green transformation.

2026-08-24

Huaneng Hainan Changjiang Nuclear Power Unit 4 Standardized Demonstration Zone Construction Achieves Phased Progress

To thoroughly implement the safety production directives from higher authorities and effectively enhance the visual management level of safe and civilized construction at Changjiang Nuclear Power Unit 4, on August 16, 2026, the special working group for the safe and civilized construction standardization demonstration zone of Huaneng Hainan Changjiang Nuclear Power Unit 4 went deep into the construction site to conduct a comprehensive inspection and guidance on the creation of the standardized demonstration zone for Unit 4. The inspection was led by company leaders, with the participation of relevant responsible persons from the Engineering Management Department, Safety and Quality Assurance Department, as well as major construction participating units including CNNC 22 and CNNC 5. The working group strictly followed the implementation plan, verifying item by item the setting of signage and labels in the demonstration zone, material fixed-position management, safety protection facilities, environmental sanitation...

2026-08-22

Two New Members Join the "Guohe One" Industrial Chain Alliance

On the afternoon of August 20, the signing ceremony for the co-construction agreement of the Guohe One Industrial Chain Alliance and the exchange meeting on new nuclear materials and technologies were held at Shanghai Research Institute of Materials Co., Ltd. Shanghai Nuclear Engineering Research and Design Institute Co., Ltd. signed the "Guohe One Industrial Chain Alliance Co-construction Agreement" with Shanghai Research Institute of Materials Co., Ltd. and Qingdao Keertai Environmental Control Technology Co., Ltd., marking the official accession of the two entities to the alliance. On the same day, the Nuclear Power Isolation, Vibration Reduction, and Wear Reduction Equipment Localization Development Center, led by Shanghai Research Institute of Materials Co., Ltd., was officially launched. The center will focus on localization development in areas such as isolation, vibration reduction, and wear reduction for key nuclear power equipment, promoting the transformation of related technologies from research and validation to engineering application.

2026-08-22

Russia's Novovoronezh NPP Publishes 2025 Environmental Safety Report

Russia's Novovoronezh Nuclear Power Plant recently released its 2025 environmental safety report to the public. The presentation of the report was arranged during navigation activities on the Don River, with participation from plant representatives, representatives of the Russian Ecological Society, personnel from relevant public institutions of Voronezh Oblast, environmental experts, journalists, and bloggers. The report focuses on the plant's impact on the surrounding environment and monitoring activities. According to Novovoronezh NPP, the plant conducts monthly water quality inspections at 24 control points along the Don River, most of which are located within urban areas. During the event, staff also demonstrated the water sampling process from the Don River at the plant's dedicated pier...

2026-08-23