Search Results

First PCS Heat Exchanger Pre-Introduction Successfully Completed at Zhejiang Jinqimen Nuclear Power Project

On August 16, the pre-introduction of the first PCS heat exchanger at the Zhejiang Jinqimen Nuclear Power Project, undertaken by China Nuclear Industry Fifth Construction Co., Ltd. (CNFC), was successfully completed. The entire introduction process was smooth and orderly, with safety and quality fully under control. The smooth pre-introduction of this PCS heat exchanger has laid a solid foundation for the subsequent modular dome lifting and overall project construction. As a core key equipment in the reactor building, the PCS heat exchanger features heavy weight, high installation precision, and significant difficulty. To ensure lifting safety, the project team organized 7 special discussions and 5 on-site surveys, sorted out preconditions, fabricated dedicated angle tooling, and clarified operation procedures and safety control points. During the lifting, management personnel provided full-time on-site supervision, with commanders and operators working in close coordination to strictly control equipment positioning. After 3 hours of continuous operation, a series of processes including equipment lifting, flipping to vertical, fine angle adjustment, and equipment pre-introduction were precisely completed, and the equipment was finally placed smoothly, marking the successful completion of the pre-introduction work.

2026-08-19

Module 4 of Steel Liner for Unit 3 of San'ao Nuclear Power Plant Successfully Hoisted

At 8:16 a.m. on August 15, the hoisting operation of Module 4 of the 3BRX steel liner for Unit 3 of the San'ao Nuclear Power Plant was officially launched. Under the stable operation of the 2,000-ton crawler crane of CNNC Machinery Engineering, the module successively completed a series of procedures including slewing, load-bearing travel, and alignment adjustment. After 220 minutes, the hoisting task was successfully completed. Module 4 of Unit 3 hoisted this time was integrally assembled from the fourth and fifth layers of the cylinder, with a diameter of approximately 45 meters and a height of 11.46 meters. The module features a large volume, susceptibility to deformation, and limited slewing space for the crane. The project team strictly implemented the special plan, completed site reinforcement, transport of baskets and counterweights, and crawler crane relocation in advance, organized hoisting simulation drills, and comprehensively inspected various safety hazards...

2026-08-18

Minister of Ecology and Environment Huang Runqiu Visits Zhejiang to Survey Ecological Environmental Protection and Nuclear Power Safety Regulation

From August 14 to 15, Minister of Ecology and Environment Huang Runqiu visited Lishui, Taizhou, and Ningbo in Zhejiang Province to survey ecological environmental protection efforts. During his tenure in Zhejiang, General Secretary Xi Jinping visited Lishui multiple times and expressed high expectations for strengthening ecological environmental protection. Huang Runqiu visited Liandu District in Lishui to inspect on-site the outcomes of Oujiang River ecological environment governance, rural living environment improvement, and ecological protection efforts, and also toured the Ecological Product Value Realization Mechanism (Lishui) Exhibition Hall to gain in-depth understanding of local practical experience in advancing ecological product value accounting and exploring the "Two Mountains" transformation pathway. He stated that it is essential to thoroughly study and implement Xi Jinping Thought on Ecological Civilization, firmly establish and practice the concept that lucid waters and lush mountains are invaluable assets, adhere to ecological priority and green development, and effectively protect this beautiful landscape. It is necessary to fully leverage the role of demonstration models, deepen the application of the "Thousand Villages Demonstration, Ten Thousand Villages Improvement" experience, continuously improve the rural living environment, develop distinctive industries such as "ecology + cultural tourism" tailored to local conditions, and support rural ecological revitalization. It is also important to summarize and promote the "Two Mountains" transformation model, actively expand channels for realizing ecological product value, and continuously convert ecological advantages into development advantages. Actively, safely, and in an orderly manner developing nuclear power is an important measure for building a clean, low-carbon, safe, and efficient energy system and for achieving carbon peak and carbon neutrality. Huang Runqiu visited the Sanmen Nuclear Power Plant in Taizhou, going deep into the main control room of the operating unit and the nuclear island building of the unit under construction to learn in detail about the operation status and construction progress of the nuclear power units, and to express condolences to and meet with the on-site supervision personnel of the East China Regional Office of Nuclear and Radiation Safety Supervision. He emphasized the need to uphold the rational, coordinated, and balanced nuclear safety philosophy, place the assurance of nuclear safety at the highest priority, strengthen whole-process supervision of nuclear power plants, and consolidate the primary responsibility for nuclear safety. It is necessary to urge enterprises to strictly implement the requirements of nuclear safety regulations and standards, effectively ensure the safe operation of nuclear power units and controlled construction quality, enhance equipment stability and reliability, strengthen radiation environment monitoring at nuclear power plants, and safeguard the high-quality development of the nuclear power industry with high-level safety. Ensuring the construction quality of nuclear power units is crucial to improving the safety level of nuclear power plants. Huang Runqiu visited the nuclear island foundation area of the Jinqimen Nuclear Power Plant in Ningbo to survey the construction progress and engaged in on-site exchanges with nuclear safety supervision personnel. He emphasized the need to implement the spirit of General Secretary Xi Jinping's important speeches and instructions on nuclear safety work, always adhere to the principles of safety first and quality first, effectively operate the nuclear safety responsibility system and quality management system, and continuously strengthen experience feedback and safety improvements. It is necessary to continuously advance the development of nuclear safety culture, strengthen bottom-line thinking and extreme-scenario thinking, enhance natural disaster monitoring, early warning, and preventive response, and effectively build premium and safe projects to strongly support the sustainable development of China's nuclear power industry and its "going global" strategy. Relevant officials from Zhejiang Province participated in the survey. Principal officials from relevant departments and bureaus of the Ministry of Ecology and Environment participated in the survey. Officials from the Department of Ecology and Environment of Zhejiang Province and others participated in the survey.

2026-08-17

Poland's First Nuclear Power Plant Enters New Phase with Deepening Polish Enterprise Participation

Poland's first nuclear power plant (Lubiatowo-Kopalino site) has transitioned from the preparatory stage to substantive on-site construction. On August 12, Polish Nuclear Power Company (PEJ) officially handed over the construction site to the general contractor, American company Bechtel, while Budimex, one of Poland's largest construction firms, commenced earthworks. This marks another significant milestone for the project following the securing of financing, the refinement of the legal framework, and support from technology partners. Polish Energy Minister Miłosz Motyka stated that this investment will enhance Poland's energy security and sovereignty, while creating stable and predictable energy prices for households and businesses. To date, PEJ has signed contracts with approximately 4...

2026-08-13

"Triple-Arrow Assault" Confirms a Cosmic "Natural Accelerator" Ejecting Protons at Energies 100 Times That of the Large Hadron Collider

Astronomers, using three observation facilities operating in different wavelength bands, have confirmed a mysterious celestial body in the direction of the Aquila constellation in the Milky Way as a natural cosmic accelerator. This object is continuously ejecting high-speed particles with energies far exceeding any man-made accelerator on Earth, equivalent to 100 times that of the Large Hadron Collider (LHC). This discovery provides key clues for tracing the origin of the highest-energy cosmic rays in the Milky Way, and the research findings were published in the latest issue of The Astrophysical Journal. A size comparison between the gamma-ray source (large circle) and the Moon (small circle). Image credit: The Astrophysical Journal. PeV (peta-electronvolt) energy cosmic rays are high-energy diffuse gamma-ray radiation, and...

2026-08-11

Linn County, Iowa, rejects rezoning application for data center site near nuclear power plant

The Linn County Board of Supervisors in Iowa said Monday it will not proceed with amendments to the EU-2 zoning district. This decision means that large data centers will not be permitted to be built near nuclear facilities through this zoning rule for the time being. The current EU-2 zoning primarily allows for nuclear power generation facilities, nuclear waste storage facilities, and natural gas power generation facilities, and does not list large data centers as permitted uses. The zoning adjustment drew attention due to the potential restart of the Duane Arnold Energy Center near Palo. If the nuclear facility were to resume operations, it could provide a stable power source for energy-intensive data centers, prompting interest from data center companies in surrounding...

2026-08-11

Typhoon "White Dolphin" Approaches Fujian-Zhejiang Coast, Ningde Nuclear Power Initiates Typhoon Emergency Deployment

According to the forecast of the Central Meteorological Observatory, Typhoon White Dolphin is expected to make landfall along the coast from Zhoushan, Zhejiang to Fuding, Fujian between the night of August 9 and the morning of August 10, with an intensity of 12 to 14 levels at landfall, classified as a typhoon or severe typhoon. Affected by this round of typhoon, Fujian has upgraded its emergency defense level. The Fujian Provincial Meteorological Observatory upgraded the typhoon warning to Level II at 9:00 on August 9, and the Fujian Provincial Flood Control and Drought Relief Headquarters upgraded the typhoon emergency response to Level II at the same time. Heavy to torrential rain is expected in northern Fujian from August 9 to 10, with localized extremely heavy rain. State Grid Fujian Electric Power has issued a Level III warning for typhoon and rainstorm, and activated a Level IV emergency response for typhoon, rainstorm, and flood disasters. Located in Fujian...

2026-08-10

CGN Dasheng Joins Hands with Zhejiang Jiaguangshu to Build China's First Fully Self-Developed Electron Beam Curing Coil Steel Coating Industry Chain

On August 5, CGN Dasheng Accelerator Technology Co., Ltd. signed a strategic cooperation agreement on electron beam curing coil steel coating with Zhejiang Jiaguangshu New Material Technology Co., Ltd. Leveraging the electron accelerator equipment independently developed and manufactured by CGN Dasheng, combined with the partner's large-scale mass production process capabilities, the two parties jointly built the first fully self-controllable, fully domestically produced complete industry chain for electron beam curing coil steel coating in China, marking the official entry of China's color coating industry into a new era of solvent-free, zero VOC (volatile organic compounds), and room-temperature green curing. ▲CGN Dasheng and Zhejiang Jiaguangshu sign strategic cooperation agreement on electron beam curing coil steel coating Electron beam curing is a revolutionary new technology for metal coil coating...

2026-08-06

Zhongyan Dadi Secures Consecutive Wins for Two Major Projects at a Nuclear Power Plant in Zhejiang

Recently, Beijing Zhongyan Dadi Technology Co., Ltd. (hereinafter referred to as "Zhongyan Dadi"), as a member of a consortium, has successfully won consecutive bids for the BOP sub-project construction works (Section 1) of Units 1 and 2 at a nuclear power plant in Zhejiang, as well as geotechnical-related projects for the waste treatment center sub-project. This successful bid represents a significant achievement in the company's continued deep engagement in national-level key nuclear power infrastructure, fully demonstrating Zhongyan Dadi's technical strength, mature performance capability, and core market competitiveness in nuclear power engineering construction. Planning renderings of the awarded projects The nuclear power plant in Zhejiang is a national key clean energy benchmark project, holding important strategic significance for optimizing the energy structure of the Yangtze River Delta region and advancing green, low-carbon transformation...

2026-08-04

Pre-Startup Review (PSUR) for Sanmen Nuclear Power Plant Unit 3 Completed

From July 15 to 30, the Pre-Startup Review (PSUR) for Sanmen Nuclear Power Plant Unit 3 was conducted at the Sanmen nuclear power plant site. The review was organized by the Shanghai Office of the World Association of Nuclear Operators (WANO), and the review team consisted of 21 experts from the WANO Shanghai Office, WANO Tokyo Center, and Korea Hydro & Nuclear Power Co., Ltd. Leaders of Sanmen Nuclear Power Company and personnel from relevant fields participated in this activity. The review aimed to systematically and comprehensively evaluate the readiness of Unit 3 prior to startup, identify areas for improvement, analyze causes, and propose improvement recommendations. Through site inspections, work observations, document package reviews, and personnel interviews, the WANO review team conducted a thorough assessment of...

2026-08-03

Six Polish companies enter final stage of supplier qualification for Westinghouse AP1000 first reactor

Poland's Mostostal Kielce, along with five other Polish companies, has entered the final stage of qualification jointly organized by Westinghouse and Polish Nuclear Power Company (PEJ), with the potential to participate in the construction of Poland's first nuclear power plant. The plant will be located in the Choczewo municipality and will use AP1000 technology. The six companies entering the final stage include Mostostal Kielce, FAMAK, Ferrum Welded Structures Plant, Mostostal Siedlce, Mostostal Kraków, and Energomontaż-Północ Gdynia. In the final round, they will produce structural mock-ups to verify compliance with ASME NQA-1, the international quality standard for the nuclear sector. Prior to this...

2026-08-01

State Council Approves Four Nuclear Power Projects, Eight Units Granted Construction Approval

On July 31, the State Council's executive meeting reviewed and approved four nuclear power projects, including the Phase I project of Zhuanghe in Liaoning Province. The meeting noted that nuclear power units should be constructed and operated in accordance with the highest global safety standards, with strengthened safety oversight across the entire chain and all sectors, to ensure absolute nuclear safety. According to reports, the approved projects comprise a total of 8 units across 4 projects, specifically: 2 units for Phase II of CNNC's Jinqimen Nuclear Power in Zhejiang, 2 units for Phase I of Zhuanghe Nuclear Power in Liaoning, 2 units for Phase III of CGN's Taipingling Nuclear Power in Guangdong, and 2 units for Phase I of SPIC's Laiyang Nuclear Power in Shandong. According to the approvals previously issued by the National Nuclear Safety Administration for the Environmental Impact Reports (site selection stage) of the above four projects...

2026-07-31

China Energy Engineering Group Guangdong Thermal Power Engineering Co., Ltd. Wins Bid for CGNPC San'ao Nuclear Power Supporting 220 kV Transmission EPC Project

On July 28, China Energy Engineering Group Guangdong Thermal Power Engineering Co., Ltd. announced that it has recently won the bid for the EPC general contracting project of the 220 kV transmission line from Liulong Substation to Hengyang Substation under the CGNPC CS Project. This project is part of the nuclear power supporting infrastructure construction and an important component of the 220 kV construction and auxiliary power lines within the San'ao Nuclear Power Plant.

2026-07-29