Search Results

Keyword:SH_N

U.S. Department of Energy Selects SHINE Technologies for Genesis Initiative, AI to Optimize Reprocessing of 95,000 Tons of Spent Nuclear Fuel

U.S. Department of Energy Selects SHINE Technologies for Genesis Initiative, AI to Optimize Reprocessing of 95,000 Tons of Spent Nuclear Fuel

The U.S. Department of Energy has selected SHINE Technologies to participate in the Genesis mission, advancing the application of artificial intelligence in the nuclear industry. The core objective of the project is to develop an AI-assisted design system for engineers to plan more efficient spent fuel reprocessing facilities. The United States currently has approximately 95,000 tons of accumulated spent nuclear fuel, which has historically posed long-term storage and disposal challenges. The new approach seeks to recover still-valuable components from this material, reducing waste volume and improving resource utilization. The key to this project lies in transforming traditional engineering design methods. In the past, metrics such as throughput, final product quality, and waste volume in nuclear fuel reprocessing processes were typically evaluated separately...

2026-08-09

"AI-Based Automated Authenticity Verification System for Quality Certificates" — Diao Long, Deputy Chief Engineer of Engineering Quality Assurance, CGN Huizhou Nuclear Power Co., Ltd.

"AI-Based Automated Authenticity Verification System for Quality Certificates" — Diao Long, Deputy Chief Engineer of Engineering Quality Assurance, CGN Huizhou Nuclear Power Co., Ltd.

On November 14, 2025, Diao Long, Deputy Chief Engineer of Engineering Quality Assurance at CGN Huizhou Nuclear Power Co., Ltd., delivered a keynote report titled "AI-Based Automated Authenticity Verification System for Quality Certificates" at the "AI+Nuclear Innovation Application Scenario Roadshow" of the Shenzhen Nuclear Expo. The presentation introduced Huizhou Nuclear Power's AI-based automated authenticity verification system for quality certificates, designed to address issues such as low manual verification efficiency, error-proneness, difficulty in traceability, and diverse counterfeiting methods. The system achieves batch, high-speed, and traceable authenticity verification through certificate upload, QR code recognition, web scraping, large model key information comparison, and report generation, and has identified anomalies in multiple real-world counterfeiting cases...

2026-08-08

Vacuum test of the turbine condenser at Unit 1 of Akkuyu NPP successfully completed

Vacuum test of the turbine condenser at Unit 1 of Akkuyu NPP successfully completed

The vacuum test of the turbine condenser at Unit 1 of Turkey's Akkuyu NPP, built by Rosatom, has been completed. The operation confirmed that the main systems of the turbine unit are ready for the next stage of commissioning. During the test, technicians established the required negative pressure in the condenser, checked the tightness of the vacuum system and the thermomechanical condition of the turbine, while monitoring parameters such as condenser vacuum, steam pressure, bearing temperatures, and thermal expansion of the casing and rotor. During the turning gear rotation of the turbine, the proper operation of the flow path (blades) was confirmed. Systems involved in the operation included: start-up boiler house boilers, vacuum system, bearing lubrication system, hydraulic jacking oil system, main turning gear, steam supply and extraction systems, as well as the equipment thermomechanical condition monitoring system.

2026-08-08

Shanghai Electric Southwest Regional Headquarters Unveiled in Chengdu, Government-Enterprise-Research Collaboration Builds a New Hub for Green Energy

Shanghai Electric Southwest Regional Headquarters Unveiled in Chengdu, Government-Enterprise-Research Collaboration Builds a New Hub for Green Energy

On August 6, the unveiling ceremony of the Southwest Regional Headquarters of Shanghai Electric Group was held in Chengdu. Jin Xiaolong, member of the Party Committee and Vice President of Shanghai Electric, attended the event and delivered a speech. More than 200 representatives from relevant government departments of Sichuan Province, Chengdu City and the Southwest region, the Shanghai Office in Tibet, key enterprises, research institutes, industry associations, as well as heads of relevant functional departments of Shanghai Electric headquarters and various industrial groups, participated in the event. The newly unveiled Southwest Regional Headquarters will be based in Chengdu, radiating to Sichuan, Chongqing, Yunnan, Guizhou and Tibet, positioned as a collaboration platform for the regional market, a service hub for industrial upgrading, and a connecting vehicle for ecosystem co-building, integrating Shanghai Electric's comprehensive advantages in energy equipment and green intelligent industry...

2026-08-08

Liu Mingsheng, Party Secretary and Chairman of SPIC, Conducts Research Visit to SPIC Laiyang

Liu Mingsheng, Party Secretary and Chairman of SPIC, Conducts Research Visit to SPIC Laiyang

On August 6, Liu Mingsheng, Party Secretary and Chairman of State Power Investment Corporation (SPIC), conducted a research visit to SPIC Laiyang, where he conveyed and studied the spirit of the State Council Executive Meeting held on July 31, inspected the site of the Laiyang Nuclear Power Project, and chaired a research symposium. Liu Mingsheng affirmed the overall work approach of SPIC Laiyang. Liu Mingsheng pointed out that Laiyang Nuclear Power, as the first implementation project for the standardization and batch construction of "Guohe No.1", is of extremely significant importance to the Group's high-quality development of nuclear power. It is essential to conscientiously implement the spirit of the State Council Executive Meeting on July 31, construct and operate nuclear power units in accordance with the world's highest safety standards, always adhere to the principle of "safety first, quality first", prioritize nuclear safety at the highest level, and ensure absolute safety in nuclear operations. It is necessary to unify thinking, strengthen confidence, scientifically grasp opportunities and challenges, continuously enhance the maturity of the "Guohe No.1" reactor design, accelerate the improvement of its competitiveness, strengthen nuclear power construction management capabilities and talent team development, build the Laiyang Nuclear Power Project to high standards and high quality, polish the "Guohe No.1" brand, develop replicable and scalable management models and experience, and promote large-scale development.

2026-08-08

SHINE Selected for Two U.S. Department of Energy AI Nuclear Fuel Recycling Projects

SHINE Selected for Two U.S. Department of Energy AI Nuclear Fuel Recycling Projects

SHINE Technologies, a U.S. fusion energy company, has recently been selected for projects under the U.S. Department of Energy's Genesis Mission, participating in two artificial intelligence applications for the nuclear energy sector. Among these, SHINE will lead a nuclear fuel cycle facility optimization project and join the Prometheus project, a collaborative effort between national laboratories and industry. The project led by SHINE, named AI-Guided Fuel Cycle Facility Optimization, is a Phase 1 project with Argonne National Laboratory as the technical partner. The project plans to develop an AI-assisted workflow to help engineers...

2026-08-07

UK's MAST Upgrade sets plasma pressure record in fifth experimental campaign

UK's MAST Upgrade sets plasma pressure record in fifth experimental campaign

The UK Atomic Energy Authority (UKAEA) has completed the fifth experimental campaign of its flagship fusion experiment, MAST Upgrade. The campaign, conducted between 2025 and 2026 at the Culham Campus in Oxfordshire, UK, produced over 1,100 plasma pulses and achieved the device's highest-ever plasma pressure while overcoming plasma instability issues. In fusion devices, hydrogen isotopes must be heated, compressed, and confined under extremely high temperatures and pressures. The higher the plasma density and temperature, the stronger the fusion reaction, and high-pressure plasmas are also closer to the operating conditions required for future commercial fusion power plants. UKAEA stated that this...

2026-08-07

Türkiye plans to commission subsequent Akkuyu nuclear power plant units at one-year intervals

Türkiye plans to commission subsequent Akkuyu nuclear power plant units at one-year intervals

Turkish Energy Minister Alparslan Bayraktar said on August 6 that Türkiye plans to commission subsequent units of the Akkuyu Nuclear Power Plant (NPP) at one-year intervals after the first unit goes into operation. Bayraktar stated that Unit 1 of the Akkuyu NPP is scheduled to begin generating electricity by the end of the year, with work on the first reactor's commissioning currently progressing at full speed. According to Türkiye's plan, after Unit 1 enters service, the remaining units will successively enter the commissioning phase. The Akkuyu NPP is Türkiye's first nuclear power plant, constructed by Russia's State Atomic Energy Corporation (Rosatom). The project plans four units, all using Russia-designed Generation III+...

2026-08-07

New Chair Takes Office for ASME BPV III China International Working Group

New Chair Takes Office for ASME BPV III China International Working Group

On August 4, the 2026 First Working Meeting and the Fourth Chairmanship Election Conference of the ASME Boiler and Pressure Vessel Code Section III (BPV III) China International Working Group (hereinafter referred to as the "Working Group") were held at Shanghai Nuclear Engineering Research and Design Institute (SNERDI). Following a vote by attending committee members, Jiao Ming, Deputy General Manager of the company, was unanimously elected as the new Chair of the Working Group, while Zhou Zhou, Director of the Nuclear Equipment Safety and Reliability Center at China Productivity Center for Machinery, and Jiang Cailin, Vice President of Shanghai Electric Nuclear Power Group, were elected as Vice Chairs. Jiao Ming stated that the Working Group will continue to establish regular communication channels between the domestic industry and ASME, leverage key domestic nuclear power projects, and lead the industry in tackling cutting-edge technologies such as radiography testing of ultra-thick forgings, phased array ultrasonic testing, and additive manufacturing of nuclear equipment...

2026-08-07

Korea's Nuclear Safety and Security Commission Conducts Safety Inspection at Hanul Nuclear Power Plant

Korea's Nuclear Safety and Security Commission Conducts Safety Inspection at Hanul Nuclear Power Plant

Amid the ongoing heatwave, Korea's Nuclear Safety and Security Commission is closely monitoring safety inspections at domestic nuclear power plants. On August 6, Commission Chairman Choi Won-ho visited the Hanul Nuclear Power Plant in Uljin, North Gyeongsang Province, for an on-site inspection. The primary purpose of this inspection was to verify whether the plant's safety systems can operate properly under continuously rising seawater temperatures. As rising seawater temperature is a factor that directly affects the cooling system, the Hanul plant conducted detailed checks on heat exchanger performance and thermometer conditions. Chairman Choi also held prior discussions via video conference with relevant nuclear agencies on response measures to high temperatures. During the subsequent on-site inspection, he reviewed...

2026-08-06

Final Voyage Completed for Rebar Cage Sea Transport to Hinkley Point C Nuclear Power Station

Final Voyage Completed for Rebar Cage Sea Transport to Hinkley Point C Nuclear Power Station

This summer, the cargo vessel Anfield Peak departed from the Port of Bristol in the UK, heading to Hinkley Point C Nuclear Power Station in Somerset. This marked the vessel's final voyage for the related transport mission. Previously, it had made over 100 round trips between the two locations, delivering factory-prefabricated rebar cages to the nuclear construction site. These rebar cages are large in volume and high in density, serving as critical foundational components in civil engineering construction. Under traditional practices, such rebar cages are typically prefabricated on-site before concrete pouring. The Hinkley Point C project, however, has shifted part of the rebar cage prefabrication process to a factory in Bristol, with the cages then transported by sea to the site for installation...

2026-08-06

CGN and Shandong Provincial People's Government Sign Strategic Cooperation Agreement

CGN and Shandong Provincial People's Government Sign Strategic Cooperation Agreement

On August 5, China General Nuclear Power Group Co., Ltd. and the People's Government of Shandong Province signed a strategic cooperation agreement in Jinan. Zhou Naixiang, Deputy Secretary of the Shandong Provincial Party Committee and Governor of Shandong Province, and Pang Songtao, Deputy Secretary of the Party Committee and General Manager of China General Nuclear Power Group Co., Ltd., witnessed the signing. Zhang Haibo, Member of the Standing Committee of the Shandong Provincial Party Committee and Executive Vice Governor of Shandong Province, and Cai Zhen, Member of the Standing Committee of the Party Committee and Vice General Manager of China General Nuclear Power Group Co., Ltd., signed the agreement on behalf of both parties respectively. According to the agreement, the two parties will carry out multi-level, multi-field, and multi-form cooperation and exchanges in accordance with laws and regulations, with a focus on frontier innovation areas such as nuclear energy development and utilization, deep-sea offshore wind power, new energy industries, and nuclear technology applications, intensifying cooperative development efforts to support Shandong Province in building a pilot zone for green, low-carbon, and high-quality development.

2026-08-06

UK Energy - Nuclear joins World Association of Nuclear Operators

UK Energy - Nuclear joins World Association of Nuclear Operators

Great British Energy - Nuclear (GBE-N) has joined the World Association of Nuclear Operators (WANO) as a new member of its fifth membership category. This membership category is open to organizations worldwide that are planning, constructing, or preparing to operate new nuclear facilities. By joining WANO, GBE-N will gain access to the association's global professional network, operational experience feedback, and tailored support for new nuclear projects. WANO can provide assistance in the construction, commissioning, operational readiness, startup, and long-term safe and reliable operation of new nuclear plants. GBE-N, a UK government-owned entity, is advancing plans to deploy Rolls-Royce Small Modular Reactors in Gwynedd, North Wales (formerly known as Wylfa).

2026-08-06

Site Handover for Poland's First Commercial Nuclear Power Plant to Bechtel

Site Handover for Poland's First Commercial Nuclear Power Plant to Bechtel

New progress has been made in the construction of Poland's first commercial nuclear power plant. The Lubiatowo-Kopalino site in the Pomerania region of northern Poland has been handed over to Bechtel of the United States, and earthworks at the project site are underway. Polskie Elektrownie Jądrowe (PEJ), Poland's state-owned project company, stated that Bechtel has replaced PEJ as the site coordinator for the project. Under the Polish government's earlier arrangement, the nuclear power plant will feature three Westinghouse Electric Company AP1000 pressurized water reactor units. In 2023, Westinghouse Electric Company and Bechtel formed a consortium to jointly advance project implementation. The nuclear power plant is sited in the Lubiatowo-Kopalino area along the Baltic Sea coast in Poland.

2026-08-06

CGN Technology joins forces with enterprises to build China's first fully self-developed electron beam curing coil coating industrial chain

CGN Technology joins forces with enterprises to build China's first fully self-developed electron beam curing coil coating industrial chain

On August 5, CGN Dasheng Accelerator Technology Co., Ltd., a subsidiary of CGN Technology, signed a strategic cooperation agreement on electron beam curing coil coating with Zhejiang Jiaguangshu New Material Technology Co., Ltd. Leveraging the electron accelerator equipment independently developed and manufactured by CGN Dasheng, combined with the partner's large-scale mass production process capabilities, the two parties jointly built China's first fully self-controlled, fully domestically produced complete industrial chain for electron beam curing coil coating, marking the official entry of China's color-coated steel industry into a new era of solvent-free, zero-VOC (volatile organic compounds), room-temperature green curing. CGN Dasheng and Zhejiang Jiaguangshu signed the strategic cooperation agreement on electron beam curing coil coating. Electron beam curing is...

2026-08-06