Search Results

JAEA Plans to Adjust Decommissioning Plan for Monju Fast Breeder Reactor

The Japan Atomic Energy Agency (JAEA) announced on August 21 that it plans to adjust the decommissioning plan for the Monju fast breeder reactor in Tsuruga City, Fukui Prefecture. Under the revised plan, the remaining neutron shielding layers and other components inside the reactor, along with 227 dummy fuel assemblies, will no longer be removed separately in the current phase as originally planned, but will instead be handled together during the subsequent reactor pressure vessel dismantling phase. Monju is currently in the decommissioning process. Previously, JAEA had planned to proceed with the removal of internal reactor components within the current fiscal year, but due to two equipment failures, the related work was temporarily suspended, and the overall schedule is expected to be delayed by approximately one year. As of May 25, 595 shielding layers and related components in the reactor...

2026-08-22

US FRIB Experiment Reveals Magnetic Origin of Anomalous Low-Energy Gamma-Ray Enhancement

According to an August 21 announcement from Lawrence Livermore National Laboratory, a new study led by the U.S. Facility for Rare Isotope Beams (FRIB) with participation from researchers at Lawrence Livermore National Laboratory and other institutions has provided a new experimental explanation for the long-standing low-energy enhancement phenomenon in nuclear physics. The findings were published in the journal Nature. An experiment at the Facility for Rare Isotope Beams (FRIB) has yielded new results, answering a fundamental question about nuclear structure. (Image: FRIB) Gamma rays are a form of electromagnetic radiation. When an excited nucleus loses energy during radioactive decay and transitions to a lower, more stable energy level, it emits gamma rays. Over the past few decades, scientists have discovered that certain nuclei emit anomalously large numbers of low-energy gamma rays, but this phenomenon does not occur in all nuclei, and its occurrence conditions have been difficult to predict reliably in theory.

2026-08-21

South Korea Amends Nuclear Safety Act to Clarify Safety Responsibilities of Nuclear Facility Operators

The National Assembly of South Korea passed a partial amendment to the Nuclear Safety Act at its 438th special session on August 20, marking the first time that nuclear-related business operators' primary responsibility for nuclear facility safety has been explicitly established at the legal level. This move signifies that South Korea's nuclear safety management system will further transition from a licensing and regulation-centered approach to a responsibility system aligned with the safety principles of the International Atomic Energy Agency (IAEA). The amendment was proposed by South Korean lawmaker Oh Se-hee. Prior to the revision, South Korea's Nuclear Safety Act primarily established safety standards and regulatory procedures around reactor construction and operating licenses, nuclear material use, and radioactive waste management facility operations, but lacked...

2026-08-21

US Inertia Fusion Fuel Preparation Time Significantly Reduced

US fusion startup Inertia Enterprises said it has made progress in inertial fusion energy fuel preparation in collaboration with Lawrence Livermore National Laboratory (LLNL), reducing the time required for the critical step of forming a cryogenic deuterium-tritium fuel layer from potentially several days in the past to tens of minutes. The company said this achievement completes a key task in the first phase of its commercial fusion power plant development goals. The fundamental approach of inertial fusion energy involves using high-energy lasers to compress and heat small targets containing deuterium-tritium fuel, bringing the fuel to ignition conditions and releasing energy. The National Ignition Facility (NIF) has already...

2026-08-21

South Korea Approves License Amendment for Gyeongju Low- and Intermediate-Level Radioactive Waste Disposal Facility

The Nuclear Safety and Security Commission (NSSC) of South Korea announced on August 21 that it held its 12th meeting of 2026 in written form on August 20, reviewing and approving the license amendment for the construction and operation of the near-surface disposal facility for low- and intermediate-level radioactive waste operated by the Korea Radioactive Waste Agency (KORAD). The near-surface disposal facility is located in Munmu-daewang-myeon, Gyeongju-si, Gyeongsangbuk-do, and is the second-phase project of the Gyeongju low- and intermediate-level radioactive waste disposal facility. Near-surface disposal refers to the disposal of low- and intermediate-level radioactive waste in near-surface facilities, rather than in deep underground caverns. The facility completed its pre-operational inspection in March this year. This license amendment is primarily intended to update the safety analysis report...

2026-08-21

Takahama Town in Fukui Prefecture, Japan, Plans to Give Prior Consent to Kansai Electric Power's Construction of Spent Fuel Dry Storage Facility

On August 19, Hisakatsu Nishijima, mayor of Takahama Town in Fukui Prefecture, Japan, stated that he would give prior consent to Kansai Electric Power Co.'s plan to construct a spent fuel dry storage facility, in accordance with the safety agreement signed with the company. Following Mihama Town, Takahama Town became the second municipality in Fukui Prefecture hosting nuclear power plants to express its intention to give prior consent to the plan. On the same day, Nishijima explained this decision to council members at a meeting of the town assembly held at the town office, noting that he had already obtained the assembly's understanding in advance. He said the town government made its judgment after confirming relevant issues item by item, including the specific arrangements for transporting spent fuel out of the prefecture...

2026-08-21

Kyushu Electric Power explains holding company transition to Kagoshima Prefecture; Sendai Nuclear Power Plant business to continue

On August 20, Kyushu Electric Power President Masaru Nishiyama and two others visited the Kagoshima Prefectural Government to explain to Governor Koichi Shiota the company's plan to transition to a holding company structure in October this year. Under the plan, Kyushu Electric Power will establish a new holding company, Kyuden Holdings, as the group's parent company to improve overall group management efficiency. Following the restructuring, relevant subsidiaries under Kyushu Electric Power will continue to undertake nuclear power operations, including the Sendai Nuclear Power Plant. During the meeting, Governor Shiota specifically highlighted the dry storage facility for spent nuclear fuel that Kyushu Electric Power plans to adopt at the Sendai Nuclear Power Plant...

2026-08-21

Korea Advances Construction of Temporary Spent Fuel Dry Storage Facility at Hanbit Nuclear Power Plant

Korea Hydro & Nuclear Power (KHNP) is advancing the construction of a temporary spent fuel storage facility at the Hanbit nuclear power plant site. The company recently launched an information session process for local residents, planning to collect opinions through briefings and discussion meetings. According to the schedule, three briefing sessions will be held on the 25th and 26th of this month in Yeonggwang County, South Jeolla Province. The first session is set for 2:00 PM on the 25th at the Hongnong Community Center, with the other two held at 10:00 AM and 3:00 PM on the 26th at the Gunam-myeon Multipurpose Center and Starlight Hotel, respectively. Following the briefings, a discussion meeting will be held on the 1st of next month at 2:00 PM at the Starlight Hotel, with Korea Electric Power Corporation (...

2026-08-21

Ikata Nuclear Power Station's miscellaneous solid waste incineration facility returns to normal operation

Shikoku Electric Power Co. reported on August 20 that the miscellaneous solid waste incineration facility at Ikata Nuclear Power Station returned to normal operation at 12:15 p.m. that day after inspections and component replacements. Previously, a small amount of ash leakage had occurred beneath the ceramic filter of the facility. According to the report, at approximately 10:25 a.m. on August 13, operating personnel from a partner company discovered ash-like material beneath the ceramic filter of the operating incineration facility in the miscellaneous solid waste incinerator building of Ikata Nuclear Power Station. On-site investigation confirmed that the fallen material was ash, and the leakage had stopped. The leaked ash remained within the building and was fully recovered, amounting to 0.3 grams with a radioactivity of 8...

2026-08-20

Aomori Prefecture in Japan to Apply as Candidate Site for Nuclear Fusion Power Generation Demonstration Facility

On August 19, Soichiro Miyashita, Governor of Aomori Prefecture, stated that the prefecture will apply as a candidate site for a nuclear fusion power generation demonstration facility once relevant preparatory work is completed. Starlight Engine, a Japanese nuclear fusion startup, is currently soliciting candidate sites from prefectures and government-designated cities, with plans to conduct field surveys of promising candidates as early as this autumn. Starlight Engine plans to finalize the construction site by 2028, launch the FAST nuclear fusion power generation demonstration project in 2035, and conduct power generation demonstrations in 2038. The application deadline for site selection is October. Aomori Prefecture stated that it will consult with Rokkasho Village and, after preparing the application documents, formally submit the application.

2026-08-20

Full-Life Technologies Completes Construction of Belgian Radiopharmaceutical Production Facility and Initiates Accelerator Commissioning

Full-Life Technologies (hereinafter referred to as "Full-Life"), a privately held, fully integrated, clinical-stage international radiopharmaceutical therapy company, announced on August 20 that its radiopharmaceutical production facility in Gembloux, Belgium, has completed construction and received authorization to commence accelerator commissioning and enter the initial ramp-up phase. (Full-Life Technologies Belgium Radiopharmaceutical Production Facility) This milestone marks a significant step forward in Full-Life's vertically integrated radioisotope production capabilities moving toward formal operational status. With the completion of facility construction, the company has entered the next phase of operational preparation, including accelerator installation, phased commissioning, and validation of critical safety and operational systems.

2026-08-20

Energy Fuels' Utah Plant's Terbium Oxide Certified by Japanese Rare Earth Permanent Magnet Manufacturer

On August 19, U.S. critical materials producer Energy Fuels Inc. announced that the terbium oxide produced at its White Mesa plant in Utah has passed all certifications from a Japanese rare earth permanent magnet manufacturer, enabling its use in commercial rare earth permanent magnet production without further qualification or verification. According to the company, this Japanese manufacturer is one of the world's largest rare earth permanent magnet producers outside China. Energy Fuels stated that the certification of its terbium oxide demonstrates that its heavy rare earth product quality and rare earth processing capabilities have been recognized by downstream users. The company's previously produced neodymium-praseodymium oxide and dysprosium oxide have also obtained qualification certifications for use in rare earth permanent magnet manufacturing. Terbium is one of the important heavy rare earth elements, primarily used to enhance the heat resistance and performance of high-strength neodymium-iron-boron permanent magnets. Neodymium-iron-boron permanent magnets are widely used in automotive, advanced electronics, robotics, aerospace, and other sectors. According to Benchmark Mineral Intelligence's European CIF price data, the current market price of terbium oxide is approximately $5.5 million per metric ton.

2026-08-20

Ukraine Approves Expansion of Buryakivka Radioactive Waste Disposal Facility

The State Nuclear Regulatory Inspectorate of Ukraine (SNRIU) has approved the construction of a new disposal facility at the Buryakivka radioactive waste disposal site for the disposal of low- and intermediate-level radioactive waste generated during the cleanup of the Chernobyl nuclear accident. The Buryakivka radioactive waste disposal facility is located within the Chernobyl Exclusion Zone and is one of Ukraine's key facilities for managing radioactive waste associated with the Chernobyl accident. Built as part of priority emergency measures following the accident, the facility was commissioned in 1987 and primarily receives low- and intermediate-level radioactive waste from the Chernobyl region. Currently, the facility is operated by the Central...

2026-08-20

Canada Approves Bruce Power Hot Cell Facility Operations, Strengthening Lutetium-177 Medical Isotope Supply Chain

Bruce Power has recently received approval from the Canadian Nuclear Safety Commission to operate its on-site hot cell facility for target carrier removal (TCR) work, a critical step in the production process of the medical isotope lutetium-177 (Lu-177). Lu-177 is used in the treatment of prostate cancer and is increasingly applied in targeted therapies for precision medicine. Under the approval, Bruce Power can perform the relevant processing steps on site, further streamlining the isotope production process, reducing transportation requirements, while helping to enhance operational safety, lower emissions, and strengthen Ontario's capabilities in the global medical isotope supply chain. The hot cell facility was completed earlier this year...

2026-08-20

CNNC Xiyi Waste Barrel Storage Well Grinding Robot Completes On-Site Testing

Recently, the waste barrel storage well grinding robot developed by CNNC Xiyi officially completed on-site testing in the grinding project of the process BOP (three wastes) storage wells of Units 3 and 4 at Xudabao, marking a substantial breakthrough in the field of automated construction in confined deep-well spaces within the nuclear industry. Waste barrel storage wells feature great depth, small openings, high verticality requirements, and high dust concentrations. Traditional manual grinding requires multiple workers to take turns entering the confined space, resulting in long construction cycles and high risks. The grinding robot developed by CNNC Xiyi is equipped with an XYZ three-axis movement mechanism and a multi-degree-of-freedom motion system with R rotation and W width adjustment, covering a working width of 12 meters with a maximum grinding depth of 5 meters, applicable to the construction of standard waste barrel storage wells across various reactor types...

2026-08-20