Search Results

UNESCO Expert Mission Inspects Environmental Remediation Project at Former Baikal Pulp and Paper Mill in Russia

On August 19, 2026, a monitoring mission for the Lake Baikal World Heritage Site, comprising experts from UNESCO and the International Union for Conservation of Nature, inspected the cumulative environmental damage remediation work carried out by Federal Environmental Operator, a subsidiary of Rosatom, at the former Baikal Pulp and Paper Mill site. At the former plant area, the experts were briefed on progress in sludge treatment, alkaline wastewater treatment, and nature-based remediation technologies. The relevant projects primarily target historically accumulated pollution, with the goal of reducing the risk of pollutants entering Lake Baikal. During the visit, the infrastructure at the Babushinsky landfill and the former wastewater treatment plant had been completed and entered the commissioning phase. The...

2026-08-19

Malaysian Nuclear Agency Strengthens Scientific Writing Training to Promote Dissemination of Nuclear Technology Research Outcomes

On August 18, the Malaysian Nuclear Agency stated that it will continue to enhance the scientific writing and publishing capabilities of its professionals and technical staff, driving research outcomes out of the laboratory to serve society and national development in a broader manner. Dr. Muhamad Rawi Mohamed Zin, Director General of the Malaysian Nuclear Agency, said at the opening of the 2026 Scientific Writing and Publishing Seminar and Workshop that scientific publications are a key indicator of whether research outcomes can promote knowledge advancement, solve practical problems, and create value for national development. High-quality publishing not only helps demonstrate research impact but also enables scientific outcomes to be shared, understood, and applied by a wider audience. This seminar...

2026-08-19

Deployable Energy and Hornbeck Offshore Partner to Advance Maritime Microreactor Applications

Deployable Energy recently announced that it has signed a memorandum of understanding with Hornbeck Offshore to advance the commercialization of the Unity nuclear battery for maritime and offshore applications. Hornbeck Offshore has also made a strategic investment in Deployable Energy. Under the arrangement, the collaboration will combine Deployable Energy's transportable microreactor technology with Hornbeck Offshore's operational expertise in offshore service vessels, focusing on applications such as inland waterways, offshore vessels and platforms, national security logistics and autonomous vessels, power generation barges, and floating data centers. ...

2026-08-19

Dodza Completes Equipping of SKIF Shared Center with Automated Radiation Monitoring System

According to news dated August 13, Dodza Nuclear Power Plant has completed the work to equip the Siberian Circular Photon Source Shared Center (SKIF Shared Center) with an automated radiation monitoring system (ARMS). The system will be used for continuous monitoring of the radiation conditions inside the center. The project has been implemented in stages since 2024, covering the main facilities of the SKIF Shared Center, including the injector, storage ring building, and multiple experimental stations. The newly built system features more than 300 monitoring points, enabling continuous monitoring of the radiation environment during facility operation. Under the project arrangement, Dodza Nuclear Power Plant is responsible for equipment supply and supervision of installation and commissioning; equipment installation has also been completed at the experimental stations,...

2026-08-19

Rosatom masters 3D printing technology for copper and copper alloys

The additive manufacturing technology business division of Rosatom's Fuel Division recently announced that its experts have successfully manufactured products from copper and copper alloys using the RusMelt industrial 3D printer, marking progress in additive manufacturing with copper materials. According to reports, Rosatom had previously used selective laser melting (SLM) technology to produce metal 3D-printed equipment of various sizes, with commonly used materials including stainless steel, heat-resistant materials, and titanium. Due to copper's physical properties such as high thermal conductivity and high electrical conductivity, which also pose technical challenges for laser melting, its application in metal 3D printing has long been limited. The company's additive manufacturing technology center in Moscow...

2026-08-19

RHIC Collision Data Provides New Evidence for the Existence of the "Baryon Bridge"

August 18 news, an international team of physicists, by analyzing nuclear collision data from the STAR detector at the Relativistic Heavy Ion Collider (RHIC), has presented strong evidence that baryon number may not be carried directly by quarks, but rather transmitted by a baryon bridge formed by gluons inside protons. The related paper has been published in the journal Science. Valerie A. Lentz, Brookhaven National Laboratory Baryons, including protons and neutrons, are generally considered to be composed of three quarks. In the existing understanding, the baryon number is viewed as being uniformly distributed among the three quarks. Meanwhile, gluons also exist inside protons; they are the carriers of the strong interaction. According to the description of quantum chromodynamics, gluons may form a Y-shaped structure known as a "baryon junction" or "gluon bridge" within the proton, but this structure has long lacked direct experimental evidence.

2026-08-19

U.S. Laboratory Advances Nuclear Waste Cleanup Technology R&D with Artificial Intelligence

Researchers in South Carolina, U.S., are leveraging artificial intelligence to develop new tools for tackling complex tasks such as nuclear material disposal, waste management, and environmental cleanup. The relevant projects are being conducted at the Advanced Manufacturing Collaborative (AMC) in Aiken, a facility affiliated with the Savannah River National Laboratory (SRNL), spanning approximately 63,000 square feet, with the project launched on August 7, 2025. The Advanced Manufacturing Collaborative brings together researchers, engineers, students, industry partners, and university teams, with a focus on advancing R&D in artificial intelligence, robotics, additive manufacturing, and advanced materials. Johnny Green, Director of the Savannah River National Laboratory, stated that...

2026-08-19

SHINE Advances Commercial Spent Fuel Recycling Facility Construction

U.S. electricity demand is growing at a rate rarely seen in decades, and nuclear energy is considered one of the key options to meet the incremental demand. Meanwhile, the current open nuclear fuel cycle still treats spent fuel primarily as single-use waste, failing to fully utilize most of the energy potential that remains within it. SHINE Technologies is developing spent fuel recycling technologies and plans to build a facility with spent fuel recycling capabilities. The company stated that multiple collaborations funded by the U.S. Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) CURIE program are advancing the work from validated laboratory-scale chemical processes toward commercial scale...

2026-08-19

SHINE Joins GE Vernova-Led Project to Modernize Nuclear Fuel Reprocessing Materials Accountability

SHINE Technologies (SHINE) announced on August 18 that it has joined a nuclear fuel reprocessing materials management project led by GE Vernova (GE Vernova), with both parties collaborating on tracking, measurement, and nuclear materials accountability of spent fuel during the reprocessing process. The project is led by GE Vernova's Advanced Research Center and funded by the U.S. Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E), with the goal of introducing artificial intelligence technologies into reprocessing facilities to improve real-time monitoring of spent fuel flow and the efficiency of nuclear materials accounting. As a subcontractor to GE Vernova, SHINE will participate in improving sensor deployment schemes and developing an AI-supported materials tracking system, ensuring that nuclear materials control and accountability requirements are incorporated into the overall design at the early stages of reprocessing facility development.

2026-08-19

Cernavoda Nuclear Power Plant Fully Shut Down Due to Falling Danube River Water Levels

Due to the continuous decline of the Danube River water level, the two units of Romania's only nuclear power plant, the Cernavoda Nuclear Power Plant, have been successively shut down. To alleviate the pressure on electricity supply, Unit 4 of the Rovinari coal-fired cogeneration plant has been put into operation, adding approximately 330 megawatts of generating capacity to Romania's power system. Romania's nuclear power company (Nuclearelectrica) previously reported that due to the sharp decline in the Danube River water level, which affected the assurance of cooling water for the reactor, Unit 2 of the Cernavoda Nuclear Power Plant was shut down in a controlled manner on the morning of August 13. The company stated that the shutdown process was carried out in accordance with procedures. At the end of July this year, Unit 1 of the Cernavoda Nuclear Power Plant had already been shut down for the same reason...

2026-08-19

Germany pledges assistance in repairing the damaged reactor containment at the Chernobyl Nuclear Power Plant

German Environment Minister Carsten Schneider stated during his visit to Kyiv on August 18 that Germany will assist in repairing the containment structure above the damaged reactor at the Chernobyl Nuclear Power Plant. Schneider said the containment above the damaged reactor must be repaired. He also noted that this work involves high technical difficulty and complex organizational processes, requiring joint participation and coordinated efforts from the international community. According to the itinerary, Schneider plans to visit the Chernobyl Exclusion Zone during his trip to assess the current status of the relevant facilities and subsequent repair needs. The containment repair work at the Chernobyl Nuclear Power Plant involves multiple aspects including nuclear safety, radiation protection, and engineering construction, with further specific implementation arrangements still requiring additional consultation among all parties.

2026-08-19

South Korea Has Not Yet Decided Whether to Include New Nuclear Power in the 12th Basic Plan for Electricity Supply and Demand

South Korea's Minister of Climate, Energy and Environment, Kim Sung-hwan, said during a meeting with reporters at the Sejong Government Complex on August 18 that the government has not yet reached a conclusion on whether to include new nuclear power plants in the 12th Basic Plan for Electricity Supply and Demand. Kim said that government policy cannot be determined solely by the personal will of the minister in charge, and it is not appropriate to make premature statements at this stage. He emphasized that related matters will be decided after going through the necessary deliberation process. Regarding whether nuclear power will be included in the 12th Basic Plan for Electricity Supply and Demand, the government plans to clarify the direction of discussion as soon as possible, including how public opinions will be reflected, how the review procedures involving experts and public participation will be structured, and what methods will be used to conduct debates or public discussions before the plan is released...

2026-08-19

Automatic Shutdown of Unit 4 at South Korea's Hanul Nuclear Power Plant, Regulator Launches Investigation

The Nuclear Safety and Security Commission (NSSC) of South Korea reported on August 19 that Korea Hydro & Nuclear Power Co., Ltd. (KHNP) had reported the same day that Unit 4 of the Hanul Nuclear Power Plant, located in Uljin County, North Gyeongsang Province, automatically shut down at approximately 8:50 a.m. The NSSC stated that Unit 4 of the Hanul Nuclear Power Plant is currently in a stable condition. No abnormal alarms were triggered by on-site radiation monitors, and no leakage of radioactive materials to the outside environment has been detected. According to the notification, the NSSC's regional office for the Hanul Nuclear Power Plant is conducting inspections of on-site safety conditions. The regulatory body also plans to dispatch an investigation team comprising experts from the Korea Institute of Nuclear Safety (KINS) to the site to further confirm the cause of the automatic shutdown and related safety conditions.

2026-08-19

Amentum Joint Venture Selected as Capability Partner for Australia's Nuclear-Powered Submarine Shipyard Project

Australian Naval Infrastructure (ANI) has selected a joint venture between Amentum and Laing O'Rourke as the capability partner for the nuclear-powered submarine construction shipyard project in South Australia. The project is located at the new Osborne shipyard north of Adelaide, which will be used to build Australia's conventionally armed, nuclear-powered submarines under the AUKUS trilateral agreement. Under a long-term contractual arrangement, Amentum and Laing O'Rourke will undertake key support roles during the development of the new shipyard. The work will be integrated into ANI's Integrated Delivery Office, focusing on providing specialized support in nuclear-related project management, construction management, and safety management.

2026-08-19

ASP Isotopes Subsidiary Evaluates Metal Hydrofluorination and Fluorination Project in Namibia

ASP Isotopes Inc. recently announced that its wholly-owned subsidiary, Quantum Leap Energy LLC, is evaluating metal conversion opportunities in Namibia, with work focusing on technologies and processes required for critical stages of the fission and fusion nuclear fuel cycles. According to the disclosure, the evaluation includes plans to construct a pilot-scale hydrofluorination and fluorination facility in the Walvis Bay area of Namibia. Public environmental and social impact assessments and consultation procedures for the project have already been initiated. The proposed facility will be used to develop, test, and demonstrate metal hydrofluorination and fluorination processes. In accordance with Namibian regulatory requirements, relevant public consultation notices have been published through customary local channels. The company...

2026-08-19