Search Results

Keyword:NI

SNPAS Completes Shipment of First Batch of Cabinets for PLS and DDS Systems of Lianjiang Nuclear Power Unit 2

SNPAS Completes Shipment of First Batch of Cabinets for PLS and DDS Systems of Lianjiang Nuclear Power Unit 2

Recently, witnessed by Zhanjiang Nuclear Power and Shanghai Nuclear Engineering Research and Design Institute (SNERDI), SNPAS successfully completed the delivery of the first batch of cabinets for the Plant Control System (PLS) and Data Display and Processing System (DDS) of Unit 2 of the Guangdong Lianjiang Nuclear Power Project Phase I, with the equipment having arrived at the project site smoothly. Sun Mingjun, Member of the Party Committee and Deputy General Manager of Zhanjiang Nuclear Power, Liu Xin, Deputy General Manager of SNPAS, and Zhou Xu, Deputy General Manager of the Procurement Center of SNERDI, attended the shipment ceremony. This shipment marks an important milestone in the execution of the instrumentation and control (I&C) system for Unit 2, signifying that the main I&C equipment has officially entered the stage of batch delivery and on-site installation preparation. The shipment of Unit 2 follows the mature experience of Unit 1 in...

2026-08-06

SNPAS Completes Shipment of First Batch of Cabinets for PLS and DDS Systems of Lianjiang Nuclear Power Unit 2

SNPAS Completes Shipment of First Batch of Cabinets for PLS and DDS Systems of Lianjiang Nuclear Power Unit 2

Recently, witnessed by Zhanjiang Nuclear Power and Shanghai Nuclear Engineering Research and Design Institute (SNERDI), SNPAS successfully completed the shipment and delivery of the first batch of cabinets for the Plant Control System (PLS) and Data Display and Processing System (DDS) of Unit 2 of the Phase I project of Guangdong Lianjiang Nuclear Power Project, with the equipment having arrived at the project site smoothly. Sun Mingjun, Member of the Party Committee and Deputy General Manager of Zhanjiang Nuclear Power, Liu Xin, Deputy General Manager of SNPAS, and Zhou Xu, Deputy General Manager of the Procurement Center of SNERDI, attended the shipment ceremony. This shipment marks an important milestone in the implementation of the instrumentation and control (I&C) system for Unit 2, signifying that the main I&C equipment has officially entered the phase of batch delivery and on-site installation preparation. The shipment of Unit 2 continues the...

2026-08-06

Han Bing, Chairman of Hefei Municipal CPPCC, Leads Delegation to CYC Ion for Research and Guidance

Han Bing, Chairman of Hefei Municipal CPPCC, Leads Delegation to CYC Ion for Research and Guidance

On the afternoon of August 4, Han Bing, Chairman of Hefei Municipal Committee of the Chinese People's Political Consultative Conference (CPPCC), led a delegation to CYC Ion for research and guidance, and held a symposium. Yong Fengshan, Deputy Director of the Standing Committee of the Municipal People's Congress; Su Xiang, Secretary-General of the Municipal CPPCC; Jiang Xin, Chairman of the Municipal Industrial Investment Group; Zhang Xiaofeng, Director of the Education, Science, Health and Sports Committee of the Municipal CPPCC; and Guo Mei, Deputy Director of the Municipal Bureau of Industry and Information Technology, participated in the event. Song Yuntao, Deputy Director of the Hefei Institutes of Physical Science, Chinese Academy of Sciences; Liu Lu, Chairman of CYC Ion; Chen Yonghua, General Manager; and Deputy General Managers Ding Kaizhong, Li Jun, and Guang Ruohuai accompanied the delegation. The delegation was briefed in detail on CYC Ion's industrial layout and business operations, with discussions focusing on key technological breakthroughs in nuclear medicine and high-end equipment, technology transfer and commercialization, and industrial development.

2026-08-06

CNNC & CIR Co-sponsors Regional Nuclear Medicine Department Development Training Program (Ganzhou Session) and Ganzhou Cancer Hospital High-Quality Nuclear Medicine Diagnosis and Treatment Project Launched Simultaneously

CNNC & CIR Co-sponsors Regional Nuclear Medicine Department Development Training Program (Ganzhou Session) and Ganzhou Cancer Hospital High-Quality Nuclear Medicine Diagnosis and Treatment Project Launched Simultaneously

Recently, the Regional Nuclear Medicine Department Development Training Program (Ganzhou Session) and the Ganzhou Cancer Hospital High-Quality Nuclear Medicine Diagnosis and Treatment Project were launched simultaneously at Ganzhou Cancer Hospital. An expert panel from the Nuclear Medicine Branch of the Chinese Medical Association, along with representatives from CNNC & CIR and Atom High-Tech, visited the hospital for research and exchange. More than 200 medical staff from medical institutions at various levels across Jiangxi Province attended the event. The launch ceremony was moderated by Yang Chuansheng, Director of the Nuclear Medicine Department at Ganzhou Cancer Hospital. Fu Wei, Deputy Director of the Ganzhou Municipal Health Commission; Wang Jing, Chair of the Nuclear Medicine Branch of the Chinese Medical Association; and Huang Xingwei, Party Secretary of Ganzhou Cancer Hospital, attended and delivered speeches. Wang Jing stated that nuclear medicine plays a vital supporting role in the precise diagnosis and treatment of major diseases such as cancer, and that promoting the standardized development of regional nuclear medicine at the city and county levels is conducive to channeling high-quality medical resources to the grassroots and enhancing primary healthcare service capabilities.

2026-08-06

CGN's First Spatial Truss-Type Heavy-Duty Intelligent Warehouse Robot Piloted at Ningde Nuclear Power Project

CGN's First Spatial Truss-Type Heavy-Duty Intelligent Warehouse Robot Piloted at Ningde Nuclear Power Project

Recently, the pilot project of CGN's first spatial truss-type heavy-duty intelligent warehouse robot, jointly launched by the Equipment Package and Supply Center and the Ningde Project Department, was officially put into operation at the Ningde Nuclear Power Project. The deployment and commissioning of this spatial truss intelligent warehouse robot marks a new stage for nuclear power engineering material warehousing, officially entering a three-dimensional, unmanned, and intelligent phase. As an intelligent device tailor-made for large-material scenarios in nuclear power engineering, the spatial truss intelligent warehouse robot breaks the limitations of traditional light-duty warehousing equipment. It adopts a robust truss-type structure and achieves millimeter-level precision control and multi-axis heavy-load capacity through X, Y, and Z three-axis spatial positioning, enabling...

2026-08-05

Radiation Monitoring Technical Center of the Ministry of Ecology and Environment Conducts On-Site Certification Assessment in Southwest China in Chengdu

Radiation Monitoring Technical Center of the Ministry of Ecology and Environment Conducts On-Site Certification Assessment in Southwest China in Chengdu

To further improve the national certification assessment for radiation monitoring personnel, the Radiation Environmental Monitoring Technical Center of the Ministry of Ecology and Environment recently organized an on-site certification assessment for radiation monitoring institutions in Southwest China in Chengdu, Sichuan Province. A total of 52 technical personnel from three institutions participated in the assessment: the Southwest Nuclear and Radiation Safety Supervision Station of the Ministry of Ecology and Environment (hereinafter referred to as the Southwest Supervision Station), the Tibet Autonomous Region Radiation Environment Supervision Station (hereinafter referred to as the Tibet Radiation Station), and the Sichuan Provincial Radiation Environment Management and Monitoring Center Station (hereinafter referred to as the Sichuan Radiation Station). The assessment team strictly controlled the assessment process in accordance with the provisions of the "Implementation Rules for Certification Assessment of Radiation Environmental Monitoring Technical Personnel." The assessment...

2026-08-05

Czech nuclear safety officials say domestic nuclear power plants have sufficient cooling water for both existing and new units

Czech nuclear safety officials say domestic nuclear power plants have sufficient cooling water for both existing and new units

Droughts across parts of Europe are affecting the operation of some nuclear power plants. Due to low water levels and flow rates in the Danube River, two reactors at Romania's Cernavodă Nuclear Power Plant have been shut down, and Hungary's Paks Nuclear Power Plant also faces the risk of a complete shutdown. Štěpán Kochánek, Chairman of the Czech State Office for Nuclear Safety (SÚJB), stated that plant operators should not be allowed to continue operating units at full power when cooling water is insufficient, and that related shutdown measures are conservative actions predefined in operating procedures. Kochánek explained that reactor shutdowns are not an unusually rare operation. Unit shutdown typically involves gradually reducing reactor power, inserting control rods, and bringing fission reactions to a minimal level or complete cessation. After shutdown, the reactor still requires cooling, but the demand for cooling water volume and capacity is significantly lower than during full-power operation. He noted that this process shares similarities with planned outages such as refueling overhauls and is a standardized procedure that operators should master.

2026-08-05

Shimane Nuclear Power Station Unit 2 scheduled inspection completion date moved up to September 16

Shimane Nuclear Power Station Unit 2 scheduled inspection completion date moved up to September 16

Chugoku Electric Power Co., Inc. announced on August 5 that the schedule for the 18th periodic utility inspection of Shimane Nuclear Power Station Unit 2 has been revised, with the inspection completion date moved up from September 17, 2026 to September 16, and the power generation resumption date moved up from August 19 to August 18. Shimane Nuclear Power Station Unit 2 is a boiling water reactor unit with a rated electrical output of 820 MW. The unit was shut down on February 9, 2026 and entered its 18th periodic utility inspection. The reason for this adjustment is that, during the reactor start-up preparation work, the procurement of the nitrogen gas source used to fill the reactor containment vessel was completed earlier than planned, allowing the related work to be advanced accordingly...

2026-08-05

Brazilian nuclear industry company starts fuel production for Angra 2's 22nd refueling

Brazilian nuclear industry company starts fuel production for Angra 2's 22nd refueling

Brazilian Nuclear Industries (INB) has started production of nuclear fuel required for the 22nd refueling of Unit 2 at the Angra Nuclear Power Plant (Angra 2). On July 28, INB completed the assembly of the first fuel assembly at the Nuclear Fuel Factory (FCN) in Resende, Rio de Janeiro State; on July 30, the fuel assembly passed all established quality inspections in the production process and was certified. According to the plan, INB will manufacture a total of 52 fuel assemblies for this refueling. The assembly work is expected to be completed in December 2026 and delivered to Eletronuclear in March 2027. Recently, INB has made progress in several key stages of the nuclear fuel manufacturing chain. On July 28, approximately 240 tons of enriched...

2026-08-05

US Oak Ridge National Laboratory Advances New Process to Boost Californium-252 Production

US Oak Ridge National Laboratory Advances New Process to Boost Californium-252 Production

Oak Ridge National Laboratory (ORNL), under the US Department of Energy, is advancing a new Californium-252 (Cf-252) separation process to address growing market demand. The laboratory stated that this process, developed over nearly a decade of research, is expected to shorten the Cf-252 production cycle by about one week, significantly improving processing efficiency without altering product quality. Californium-252 is a neutron-emitting radioisotope used in nuclear reactor startup, fuel testing for new reactors, as well as in oil well logging, coal analysis, port security, fuel rod scanners, and instrument calibration. ORNL noted that it is the only producer of Cf-252 in the Western world...

2026-08-05

TRISO-X Expands Oak Ridge Nuclear Fuel Campus with Approximately 70 Additional Acres

TRISO-X Expands Oak Ridge Nuclear Fuel Campus with Approximately 70 Additional Acres

TRISO-X, LLC, a wholly owned subsidiary of X-Energy, Inc., announced on August 4 that it has acquired approximately 70 acres of land near its commercial nuclear fuel campus in Oak Ridge, Tennessee, to support the continued construction and long-term expansion of its fuel manufacturing facility. Following the acquisition, TRISO-X's total campus footprint in the area has expanded to approximately 180 acres. The land acquisition was announced at a meeting of the Oak Ridge Industrial Development Board. The newly acquired land comprises two separate parcels and will provide additional space for utility access, equipment staging, fuel storage, and future...

2026-08-05

IsoEnergy and DISA to Form DISA Uranium, Advancing U.S. Uranium Recovery and Processing Platform

IsoEnergy and DISA to Form DISA Uranium, Advancing U.S. Uranium Recovery and Processing Platform

IsoEnergy Ltd. and DISA Technologies, Inc. have entered into a definitive agreement to jointly establish DISA Uranium™ Corporation, building a technology-driven U.S. uranium production, processing, and remediation platform. The platform will combine conventional uranium mining assets, uranium recovery operations, and DISA's proprietary High-Pressure Slurry Ablation processing technology (HPSA™) to serve U.S. domestic nuclear fuel supply needs. Under the agreement, IsoEnergy will transfer its portfolio of licensed and previously producing uranium mine projects located in Utah, U.S., to DISA Uranium, including the Tony M Mine, Daneros Mine, Rim Mine, Sage Plain Project, and Flatir...

2026-08-05

Fuel assembly replacement launched at Unit 2 of Beznau Nuclear Power Plant

Fuel assembly replacement launched at Unit 2 of Beznau Nuclear Power Plant

Swiss energy company Axpo launched fuel assembly replacement work at Unit 2 of the Beznau Nuclear Power Plant (KKB) on August 4, with the related outage expected to last approximately two weeks. As planned, plant technicians will replace 20 of the 121 fuel assemblies in the reactor core during the outage, while also carrying out routine inspections and system tests. More than 560 employees of the Beznau Nuclear Power Plant will be involved in the related work, supported by approximately 150 external experts on site. The fuel assembly replacement and related operations are supervised by the Swiss Federal Nuclear Safety Inspectorate (ENSI). Previously, the relevant units at the Beznau Nuclear Power Plant had been shut down due to elevated water temperatures in the Aare River. According to available information,...

2026-08-05

Colorado State University produces first ultracold neutral plasma with electron temperature below 1 kelvin

Colorado State University produces first ultracold neutral plasma with electron temperature below 1 kelvin

Researchers at Colorado State University have, for the first time, produced an ultracold neutral plasma by combining laser cooling techniques with strong magnetic fields. Measurements show that the electron temperature in this plasma is less than 1 kelvin above absolute zero, making it one of the lowest electron temperatures ever measured in a plasma. The research was published in Physics of Plasmas. The new method proposed in the paper helps test plasma theories under more controllable experimental conditions and improve computational models of plasma behavior in extreme environments. The researchers believe this achievement could contribute to future fusion energy...

2026-08-05

University of Science and Technology of China Plans to Establish a Micro-Major in "Magnetic Confinement Controlled Nuclear Fusion"

University of Science and Technology of China Plans to Establish a Micro-Major in "Magnetic Confinement Controlled Nuclear Fusion"

On the afternoon of July 28, the expert review meeting for the establishment of the micro-major in Magnetic Confinement Controlled Nuclear Fusion at the University of Science and Technology of China was held at the university's Lishi College. Seven experts from Fudan University, Sun Yat-sen University, Hefei University of Technology, Anhui University, and fusion energy enterprises formed the review committee to deliberate on the micro-major construction plan. Following inquiries and discussions, the expert group unanimously agreed to establish the micro-major. The meeting was hosted by Lishi College of USTC. Zhu Dongjie, Executive Vice Dean of Lishi College, attended the meeting, while Professor Xie Jinlin, Vice Dean of the School of Nuclear Science and Technology, and Associate Professor Liu Adi, Teaching Director of the Department of Plasma Physics and Fusion Engineering, participated in the presentation and defense. ...

2026-08-05