Search Results

Shanghai Jiao Tong University and Sichuan Provincial Cultural Relics and Archaeology Research Institute to Jointly Build Neutron Cultural Heritage Protection Laboratory

On September 2, Shanghai Jiao Tong University and the Sichuan Provincial Cultural Relics and Archaeology Research Institute signed a strategic cooperation agreement to jointly advance the construction of the Neutron Cultural Heritage Protection Laboratory, promoting the deep integration of modern technology and cultural heritage conservation. Yang Zhenbin, Party Secretary of Shanghai Jiao Tong University, and Pu Xin, Deputy Director of the Sichuan Provincial Cultural Heritage Administration, delivered speeches respectively and jointly witnessed the signing. The collaboration focuses on the scientific research, conservation, and transmission of significant cultural heritage sites including Sanxingdui. The Sanxingdui site is a vital component of the Chinese Civilization Exploration Project. With the continuous advancement of archaeological excavations in recent years, a large number of precious artifacts have been unearthed, with increasingly complex structures and materials. How to accurately obtain their internal structure, material composition, manufacturing techniques, and preservation status without damaging the artifacts themselves has become a critical issue in cultural heritage conservation and archaeological research...

2026-09-08

Malaysia Expands Nuclear Radiation Mutation Breeding Applications to Bolster Food Security and Industrial Inspection

Malaysia's nuclear technology applications are extending from traditional fields such as medicine and industry further into agricultural production and food security. Dr. Sukri, Senior Director of Project Management at the Malaysian Nuclear Agency, stated that through research and development using nuclear radiation mutation breeding technology, the agency has shortened the maturation period of cassava from the original 10 to 12 months down to 6 months. Sukri noted that this technological application helps reduce farmers' production costs, improve land use efficiency, and cultivate larger cassava varieties. In addition to cassava, the Malaysian Nuclear Agency, in collaboration with the Ministry of Agriculture and Food Security and the Department of Agriculture, has successfully developed two new rice varieties, NMR 151 and NMR 152. These new varieties feature higher yields and demonstrate strong resistance to diseases, extreme weather conditions such as prolonged drought, and flooding.

2026-09-07

South Korea Develops 3D Non-Contact Inspection System for High-Temperature Superconducting Wire

The Korea Electrotechnology Research Institute (KERI) recently announced that a research team led by Ha Hong-su and Park In-sung at its Low-Temperature Device Research Center has developed a three-dimensional non-contact ultra-precision inspection system capable of continuously measuring the thickness and width of high-temperature superconducting (HTS) wire. The institute stated that this is the world's first such inspection system for HTS wire. KERI researchers Ha Hong-su and Park In-sung pose with a high-temperature superconducting wire beside the 3D non-contact ultra-precision inspection system. [Korea Electrotechnology Research Institute] HTS wire exhibits near-zero electrical resistance below a specific temperature, enabling high-current, low-loss transmission,...

2026-09-07

Domestically Developed "Palm-Sized CT" Debuts: 6 kg Micro X-ray CT Enables 3D Non-Destructive Testing

The XTOMO-CUBE series micro-CT, independently developed by Ruiying Detection Technology (Jinan) Co., Ltd., recently made its debut. With dimensions of 140×132×220 mm and a total weight of approximately 6 kg, the device can be held in one hand and is dubbed the "palm-sized CT." It can scan small-sized samples such as chicken bones, snail shells, and capsule tablets, revealing their internal three-dimensional structures. According to reports, CT stands for computed tomography technology. Compared with traditional CT equipment, the XTOMO-CUBE integrates key modules such as a miniaturized X-ray source, rotation stage, and detector into a compact body, paired with fully self-developed software capable of completing processes including projection data acquisition, CT image reconstruction, and 3D rendering. The...

2026-09-04

Major Breakthrough in Residual Stress Research on Key Aviation Materials in China

Nickel-based single-crystal superalloys are key materials for manufacturing turbine blades in aviation engines. Recently, the neutron scattering team from the Department of Nuclear Physics at the China Institute of Atomic Energy (CIAE) under CNNC, leveraging the Engineering Science Stress Spectrometer at the China Advanced Research Reactor (CARR), overcame technical challenges in residual stress measurement of single-crystal superalloys and established a precise three-dimensional residual stress testing method based on neutron diffraction. This provides an effective solution for residual stress assessment of critical aviation materials and lays a solid methodological foundation for the in-depth application of the CARR Engineering Science Stress Spectrometer in high-end manufacturing. During high-temperature heat treatment or service of nickel-based single-crystal superalloys...

2026-09-02

Iran Says Nuclear Fusion to Become Priority in Nuclear Industry Development

At a national Government Week celebration ceremony held in Tehran, Mohammad Eslami stated that developing nuclear fusion is a priority direction for the future of Iran's nuclear industry. Iran needs to rely on its domestic capabilities, knowledge-based enterprises, and universities to drive progress in related fields. Eslami said that the innovation network of the Atomic Energy Organization of Iran (AEOI) is providing support for nuclear fusion activities, shifting related work from the technology demonstration stage further toward system development and capacity building. He also stated that the establishment of the Non-Destructive Testing (NDT) training center is an initiative to enhance industrial quality, promote technological advancement, and cultivate domestic professional expertise...

2026-08-27

CGN Dasheng Launches BV Cable X-Ray Thickness Gauge for Full Online Inspection of Cable Insulation Layers

CGN Dasheng Accelerator Technology Co., Ltd. recently announced that its BV cable X-ray thickness gauge can be used for online inspection of insulation layers during cable production. The system employs X-ray technology to perform real-time measurement of key parameters such as cable outer diameter, inner diameter, wall thickness, eccentricity, and concentricity, replacing the potential detection blind spots inherent in traditional sampling inspection methods. In cable production, insulation layer thickness directly affects product safety and material utilization. Traditional inspection typically relies on sample cutting, manual measurement, and recording, with limited inspection frequency. If issues such as uneven wall thickness or eccentricity occur during production, they are often difficult to detect in a timely manner, which also hinders subsequent quality traceability and process adjustment. According to the company, the equipment...

2026-08-14

Malaysia's Non-Destructive Testing Capabilities Gain International Recognition, Exporting Training and Technical Services to Asia-Pacific Region

August 7, 2026 - After more than four decades of collaboration with the International Atomic Energy Agency, Malaysia has progressively established a comprehensive non-destructive testing system, evolving from an early reliance on foreign testing services to becoming an influential provider of NDT services and training in the Asia-Pacific region. Trainees participate in a trainer training course in Malaysia to obtain certification in non-destructive testing radiography. (Photo: Nuklear Malaysia) Non-destructive testing is primarily used to assess the integrity of materials and components in industrial facilities and infrastructure, enabling the detection and characterization of defects without damaging the inspected object. This technology is widely applied in industrial quality control, playing a significant role in enhancing facility safety...

2026-08-12

IAEA Trains Ukrainian Experts in Non-Destructive Testing Techniques to Assess Damaged Infrastructure

The International Atomic Energy Agency (IAEA) recently conducted non-destructive testing (NDT) training for Ukrainian civil engineering experts through the International Atomic Energy Agency Support and Assistance Mission to Kherson State (ISAMKO), to support infrastructure safety assessment and recovery efforts following the destruction of the Kakhovka Dam. The training was held in July 2026 at the IAEA Non-Destructive Testing Service Center in Seibersdorf, Austria, over a five-day period, with nine Ukrainian experts participating. This was also the first training program held at the center since its inauguration in 2024. The course focused on the application of NDT techniques in civil engineering for infrastructure inspection, structural diagnostics, safety assessment, and asset integrity evaluation, helping participants...

2026-08-12

Russia's Atommash Commissions Ultrasonic Weld Inspection Robot to Boost NPP Equipment Testing Efficiency

Atommash, a plant under the mechanical engineering division of Russia's State Atomic Energy Corporation (Rosatom), has recently commissioned a new ultrasonic inspection robot for welded joints, used for weld quality checks on large nuclear power equipment such as nuclear reactors and steam generators. The plant is located in Rostov Oblast, Russia. The new equipment employs two scanning modes and can identify weld defect types and locate defect coordinates. Compared with traditional inspection methods involving manual probe movement, the robot can automatically perform scanning on components with complex geometries, increasing inspection speed by approximately 30% while reducing the need for manual work in hard-to-reach areas. At present, Atommash already operates...

2026-08-11

Tunisia Aims to Become Africa's NDT Benchmark with IAEA and Nuclear Science Center Support

To explore avenues for cooperation in Tunisia around non-destructive testing (NDT) and industrial applications of nuclear technology, the Technical Center for Mechanical and Electrical Industries (CETIME) hosted a joint delegation from the International Atomic Energy Agency (IAEA) and the National Center for Nuclear Science and Technology (CNSTN). This meeting was part of an initiative launched by these two organizations aimed at raising awareness and understanding of these technologies among institutions that use radioactive tracers and sources for industrial applications. The two sides focused on CETIME's work in non-destructive testing using radioactive sources, as well as joint projects aimed at advancing nuclear and radiation technologies applied to industry, non-destructive testing, and the enhancement of industrial quality. Through this...

2026-08-05

CGN Dasheng NDT Helps Power Batteries Pass Quality Tests Smoothly

News of new energy vehicle fires occasionally surfaces, and the culprit is almost always the power battery. To fundamentally address this industry-wide problem, the mandatory national safety standard "Safety Requirements for Traction Battery of Electric Vehicles" will officially take effect on July 1, 2026, ushering in the strictest examination the battery industry has ever faced. Facing high-standard testing requirements, CGN Dasheng has deployed its full suite of non-destructive testing capabilities, leveraging precise and comprehensive non-destructive flaw detection technologies to help the industry deliver a high-standard safety answer sheet. The internal structure of a power battery is wound layer upon layer, resembling a Swiss roll. During production, subtle defects such as electrode foil wrinkles, metal debris contamination, and misalignment between positive and negative electrodes may occur. These "minor issues" can evolve into overheating,...

2026-08-04

Russian flaw detection robots to be deployed for the first time at Egypt's El Dabaa NPP

Engineers from Russia's Ural Atomenergo and the Atomic Energy Non-Destructive Testing Center (NDTC) have developed an automated metal non-destructive testing system, which includes specialized inspection devices for reactor pressure vessel equipment. The system will be sent to Egypt's El Dabaa Nuclear Power Plant for related equipment inspection. This is also the first deployment of such a standardized system at a nuclear power project outside Russia. The system consists of multiple robotic arms and a magnetic wheeled robot, capable of delivering ultrasonic flaw detection sensors and measuring devices to positions that are difficult for humans to access. The developer stated that the main goal of the system is to replace manual operations in high-radiation areas, reducing the risk of personnel entering hazardous zones for inspection tasks.

2026-07-30

All non-destructive testing of the nuclear island main coolant piping and surge lines for Haiyang Nuclear Power Units 3 and 4 has passed inspection.

Recently, the Haiyang Nuclear Power Project—undertaken by China Nuclear Industry Fifth Construction Co., Ltd. (CNI5)—achieved another milestone: the final weld joint of the Unit 4 surge line passed ultrasonic testing (UT). This marks the successful comple

2026-07-27