Search Results

Polar Crane of Unit 1 of Shidao Bay Nuclear Power Expansion Phase I Project Officially Available

On August 12, the load test of the polar crane for Unit 1 of the Expansion Phase I Project was successfully completed, with all performance indicators fully meeting design requirements, marking that the polar crane is officially ready for use and creating favorable conditions for subsequent key tasks such as the introduction and positioning of main equipment in the nuclear island. The polar crane is the core lifting equipment in the reactor building, undertaking critical lifting and handling tasks throughout the entire lifecycle, including heavy equipment hoisting during the construction phase, refueling during shutdown and equipment maintenance during the operation phase, and equipment dismantling during the decommissioning phase. Its operational stability and reliability are directly related to the safety and quality of nuclear island installation. The success of this load test fully verified that all performance indicators of the equipment completely meet the standards for safe and reliable use...

2026-08-13

Completion of World's First Domestic CAP1000 50Hz Canned Motor Reactor Coolant Pump for Guangdong Lianjiang Nuclear Power Phase I

Recently, the world's first domestically manufactured CAP1000 50Hz canned motor reactor coolant pump for the Guangdong Lianjiang Nuclear Power Phase I project was successfully completed and ready for shipment. The completion of this equipment marks significant new progress in the independent development and localization of China's Generation III nuclear power core equipment. Harbin Electric Group provided the canned motor for this reactor coolant pump. The Guangdong Lianjiang Nuclear Power Phase I project plans to construct two domestically developed CAP1000 Generation III passive pressurized water reactor units, each with a single-unit capacity of 1.25 million kilowatts. The project is based on the independent CAP1000 Generation III passive nuclear power technology, adopts a seawater secondary circulation cooling scheme, promotes the coordinated development of nuclear power development and coastal ecological protection, and serves the green and low-carbon development needs of the Guangdong-Hong Kong-Macao Greater Bay Area. This...

2026-08-13

First Fuel Loading Officially Begins at Tianwan Nuclear Power Plant Unit 7

On August 12, as the first fuel assembly was precisely and safely loaded into its designated position in the reactor core, the first fuel loading officially began at Unit 7 of the Tianwan Nuclear Power Plant, which is invested and controlled by China National Nuclear Corporation (CNNC)'s China Nuclear Power. This marks a solid foundation for subsequent reactor criticality and commercial operation. First fuel loading is the core procedure of implanting the "energy heart" into a nuclear reactor. As a key milestone in the full lifecycle of nuclear power construction, it not only serves as a comprehensive test of the unit's years of engineering construction quality, system commissioning level, and safety management capability, but also represents the critical starting point for the unit's nuclear-powered operation. It is understood that this fuel loading is the first-ever loading for a VVER-1200 unit in China, requiring a total of 163 nuclear fuel assemblies to be loaded...

2026-08-12

Astrotech Plans Commercial Lunar Power Facility, Evaluating Nuclear Fission Power Supplement Options

Astrotech Corporation announced on August 11 that its wholly-owned subsidiary, Lunar Power & Light (LP&L), plans to develop a commercial power generation, storage, and distribution network in high-illumination regions near the lunar poles to provide lunar power services for future government and commercial customers. The company also stated that the plan remains in its early stages, with further progress contingent on technology validation, financing, customer commitments, launch conditions, and relevant government authorizations. According to LP&L's vision, the proposed power grid would consist of distributed elevated solar towers, sun-tracking systems, utility-scale and local battery storage, autonomous control...

2026-08-12

Fusion for Energy completes full delivery of ITER cryopump distribution system

The International Thermonuclear Experimental Reactor (ITER) will operate in an ultra-high vacuum environment. To prevent contamination inside the device, a set of cryopumps supplied by Europe will extract gas particles and alternate operation before and after plasma discharges, maintaining the vacuum vessel pressure at approximately one millionth of Earth's atmospheric pressure. The core of cryopump operation lies in the extremely low-temperature environment. Its internal panels will be cooled to 4 K, approximately minus 269 degrees Celsius, close to absolute zero, to capture gas particles; they are then warmed to release and expel the particles. To precisely control this process, Europe is also supplying ITER with the Front-End Cryopump Distribution System (FECDS), which delivers helium at specific doses and temperatures to the cryopumps...

2026-08-12

UK Low-Level Waste Repository Advances Capping Project, Rail-Transported Aggregate Exceeds 285,000 Tonnes

Nuclear Waste Services (NWS) is advancing capping-related works at the Low-Level Waste Repository on the west coast of Cumbria, UK, to strengthen long-term protection of existing disposal trenches and vaults. Since the repository began operations in 1959, it has supported the safe disposal of approximately 1 million cubic metres of low-level radioactive waste, making it a key facility in the UK's radioactive waste management system. NWS, part of the Nuclear Decommissioning Authority (NDA), is primarily responsible for consolidating the UK's radioactive waste management capabilities, providing management solutions for legacy wastes from civil and defence sectors as well as wastes arising from future new-build nuclear projects...

2026-08-12

Fuse Energy Technologies Corp. Reports FAETON-X Single-Shot D-D Fusion Neutron Yield of 1.27×10¹²

Fuse Energy Technologies Corp., headquartered in California, USA, announced on August 11 that its megajoule-class dense plasma focus device FAETON-X measured a peak neutron yield of (1.27±0.27)×10¹² neutrons per shot in a single D-D fusion experiment. The company stated that this is one of the highest single-shot fusion neutron yields publicly recorded by a commercial fusion enterprise, and the first to reach the 10¹² order of magnitude. FAETON-X is a megajoule-class pulsed-power fusion system developed by Fuse, designed as a single-pulse flash neutron source, serving pulsed-power fusion R&D and...

2026-08-12

Two Units of Kozloduy NPP Operating at Full Capacity as Scheduled

As of 13:00 on August 11, 2026, the two units of Kozloduy Nuclear Power Plant continue to operate at full capacity in accordance with the power generation schedule. The plant's operating team maintains continuous watch to ensure the safe and stable operation of the relevant facilities. To guarantee the water volume required for the circulating pump station and the technical water cooling system, the plant has implemented technical and organizational measures under existing conditions to maintain the operation of the shore pump station. The technical condition of the relevant facilities requires ongoing attention, and operational parameters are being continuously monitored on site. To optimize water intake conditions, the plant needs to clean the riverbed between the Danube River and the shore pump station. The operation of the shore pumps is being monitored, with flow regulated by adjusting the blade angles; if necessary, further...

2026-08-12

TRISO-X and Oak Ridge National Laboratory Extend Advanced Nuclear Fuel R&D Collaboration

TRISO-X announced on August 11 that it has extended its Collaborative Research and Development Agreement with the U.S. Department of Energy's Oak Ridge National Laboratory (ORNL). The newly signed agreement has a term of 30 months and will continue to advance commercial-scale development of TRISO fuel, manufacturing process optimization, and technology transfer, building on the collaboration established since 2016. TRISO-X is a wholly-owned subsidiary of X-energy, primarily engaged in advanced nuclear fuel manufacturing. Under the agreement, TRISO-X will continue to operate its existing pilot-scale facilities at Oak Ridge National Laboratory, with a focus on transitioning TRISO fuel from laboratory R&D to commercial-scale manufacturing. The collaboration includes optimizing fuel...

2026-08-12

Korea Fusion Energy Institute Launches Design and Manufacturing of ITER Tritium Storage and Supply Vessels

The Korea Fusion Energy Institute (KFE) announced on August 12 at its headquarters in Daejeon that it has signed a contract with a consortium comprising Iljin Power and Aizen Core to undertake the design and manufacturing of the tritium storage and supply vessels for the International Thermonuclear Experimental Reactor (ITER). ITER is currently the world's largest fusion experimental device, being jointly constructed by seven parties—Korea, the United States, the European Union, Japan, China, Russia, and India—in Cadarache, southern France. Under the procurement agreement signed between KFE and the ITER Organization in March 2025, Korea...

2026-08-12

Budapest Launches Feasibility Study for Long-Distance Heat Supply from Paks Nuclear Power Plant

On August 11, 2026, Budapest Public Services Company (BKM), in partnership with the Budapest University of Technology and Economics, launched a feasibility study to explore the delivery of thermal energy from the Paks Nuclear Power Plant to the city's district heating system via a hot-water pipeline of approximately 125 kilometers. The study focuses on the technical, economic, and construction feasibility of the project. The Paks Nuclear Power Plant is located about 100 kilometers from the capital, and the current heat load of Budapest's district heating system is approximately 100 MWth in summer, peaking at 1,000 MWth in winter. The core significance of this concept lies not only in providing a low-carbon heat source for the city but also in improving the efficiency of waste heat utilization at the nuclear power plant. The Paks Nuclear Power Plant currently...

2026-08-12

Akkuyu Nuclear Power Plant Launches Environmental Monitoring System, Recording Ecological Data to Build a "Digital Memory"

On August 10, the Akkuyu Nuclear Power Plant under construction in Mersin Province announced that its deployed high-tech environmental monitoring system has been put into operation, which will digitally record and track ecological environment changes around the plant site. The operator stated that the system not only serves the plant's own environmental compliance but also sets a new standard for environmental management in Türkiye. In terms of marine ecological monitoring, the modern chemical analysis laboratory activated on site is monitoring seawater quality in real time, regularly measuring multiple parameters such as water temperature, salinity, dissolved oxygen levels, and fish diversity. Through these data, the plant's impact on the marine ecosystem will be transparently documented. Particularly noteworthy...

2026-08-12

South China Regional Office of Nuclear and Radiation Safety Supervision of the Ministry of Ecology and Environment Conducts Special Typhoon and Flood Prevention Inspection at Changjiang Nuclear Power Plant

Currently, Hainan has entered the peak season for typhoons and heavy rainfall. Changjiang Nuclear Power Plant, having just withstood the test of Typhoon Maysak, has been hit by continuous heavy rainfall, posing叠加 challenges to on-site safety production from extreme weather. Facing the complex and severe situation, the South China Regional Office of Nuclear and Radiation Safety Supervision of the Ministry of Ecology and Environment (hereinafter referred to as the South China Regional Office) took proactive action and rose to the challenge, promptly organizing a "look-back" special inspection on typhoon and flood prevention work for Units 1 and 2 of Changjiang Nuclear Power Plant. Through comprehensive, multi-level rigorous supervision, the systematic and standardized nature of the operator's natural disaster response work was once again verified. Focusing on key links, consolidating responsibilities. To prevent and mitigate flood season safety risks at the source...

2026-08-12

Cooling seawater temperature at South Korean nuclear power plants approaches design limit

South Korean Climate, Energy and Environment Minister Kim Sung-hwan said on August 11 that due to recent rises in seawater temperature, the temperature of seawater used for cooling at South Korean nuclear power plants has approached the design limit. The government is working with Korea Hydro & Nuclear Power (KHNP) to study countermeasures such as adjusting the location of water intake points. Kim Sung-hwan made the remarks on the same day while answering a question from lawmaker Park Ji-hye at a plenary session of the National Assembly's Climate, Energy, Environment and Labor Committee, stating that the temperature of seawater used for cooling at nuclear power plants has recently approached the limit, and that KHNP and the government are closely monitoring the situation. He said nuclear power plants cannot be easily shut down over this issue...

2026-08-12

Brazil's uranium imports from Russia hit highest since 1997 in July, reaching $84.5 million in a single month, a 168-fold surge month-on-month

Brazil's uranium imports from Russia in July this year reached $84.5 million, equivalent to approximately 430 million reais, the highest level since 1997. Compared with the import value of only $504,000 in June, the single-month increase was as high as 168-fold, indicating that this transaction was not a general monthly fluctuation but a concentrated procurement of exceptionally large scale. Looking at historical data, Brazil's uranium imports have typically remained at the level of hundreds of thousands of dollars per month, and even previous periodic peaks were far below the scale seen in July. Materials show that there was an import peak exceeding $1 million in August 2025, but it still pales in comparison with this $84.5 million figure. This means that the July data not only changes...

2026-08-12